Rear strut bar made by Cusco for the ND Miata (2016+). This part installs in the trunk to connect the left and right of the vehicle together to stiffen it up and increase handling capabilities. Note that alterations to the trunk liner will be necessary to fit this strut bar. Learn More

Rear stabilizer bar kit made by Cusco for the ND (2016+) Miata. This rear bar is made of a solid material and is rated as 325% stiffer than the stock rear sway bar. This bar will have a very noticeable effect on handling. If you have an OEM rear sway bar, you don't need to buy additional hardware, just re-use OEM one. If you don't, you will need to order these pieces from your local Mazda dealership :

N243-28-170 ×1
N243-28-190 ×1
9YB04-0813 ×4
9YB04-1036 ×4

Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

Dial in the camber on your ND (2016+) Mazda Miata with the Cusco Rear Upper Arms. The Cusco Upper Leading Link is designed to allow the user to adjust the camber of the vehicle improving the wear of the tires. The rear upper arm features a pillow ball bushing for the body side of the arm and features the traditional Cusco blue finish. The upper leading link allows changes to the camber specification of +10 to -10 mm. Learn More

Steel Roll Cage (Bar) Kit made by Cusco for the ND (2016+) MX-5 Miata. This kit is the Safety21 version, which is made of black steel and is designed as a more budget friendly roll cage kit. One of the huge benefits is the wide variety of options available for this kit, including additional bars that can be added to the cage for increased rigidity and safety. Cusco makes this cage in two versions, 4 and 6 point. The 4 point kit is limited to behind the seats while the 6 point variation extends over the driver and passenger to encompass the whole cockpit. On top of that Cusco offers an optional arch bar, that attaches the left and right of the cage together for increased rigidity. Cusco also made sure when designing this bar that the center storage cubby would still be usable. The second optional bar is the side bar, made for use with the 6 point cage. This side bar connects the front and rear of the cage together to further increase chassis stiffness. Pictures show the Standard 4 Point version.

THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.

Learn More

Improve the traction of your ND (2016+) Mazda Miata with the Cusco Trailing Rod. The Cusco Trailing Rod or Trailing Link allows the user to easily adjust the caster of the rear hub to help keep the alignment in the correct specification. The Cusco Trailing Rod is an ideal addition to any lowered ND Miata with adjustments between +10 mm and -10 mm. The reinforced rubber bushing and steel construction help to reduce wheel hop during hard acceleration and deceleration. The Cusco Trailing Rod is offered in Cusco’s traditional light blue finish and comes as a pair of links for the left/right side of the vehicle. Learn More

Fantastic center bracing kit made by Kansai Service of Japan for the ND (2016+) Miata. This kit expands on the idea of the normal brace bar by expanding the mounting points from 4 to 6! The kit is made from oval aluminum shafts for lightweight and strength. Replacing your normal brace with this one only adds about 600g to the cars weight and will noticeably affect handling. Learn More

Member reinforcement plates made by Kansai Service of Japan. These member plates are only 3.2mm in thickness and made of pressed steel. These plates will stiffen up the front of your vehicle for better handling! Learn More

Strong 4-point front strut bar bar made by Kansai Service of Japan for the ND (2016+) Miata. Kansai Service uses steel bases with Chromoly shafts to connect both sides of the vehicle together for greater handling ability. It only weights 3.58KG. Note: If your Miata is not equipped with a strut tower bar from the factory, an OEM kit is needed, part number #N244-56-35X. This is for the air cowl panel Learn More

Front brace bar made by Kansai Service of Japan. This is the lower brace bar for the front of the ND (2016+) Miata and will go even further in tightening up your car. This bar is made of an aluminum oval shaft. Note that the Kansai Service Front Member Plates are REQUIRED to install this part.

Learn More