Height adjustable suspension kit made by Cusco in Japan. It has 40 possible adjustment from damping and can be lowered -108mm in front and -76mm in the rear. It comes with front and rear reinforced rubber upper mounts. Regular spring rate is 6kgf/mm front (5,7,8,9kgf/mm available) and 3.5kgf/mm rear (3,4,5,6kgf/mm available) but can be changed for free. Optional E-CON2 controller (damping force) available. Pictures show the vehicle with -40mm front and rear adjustment. For ND RF, here are Cusco's recommendations : For street ride, they recommend front 6kgf/mm and rear 4kgf/mm. For circuit, front 7kgf/mm and rear 5kgf/mm would be good. Check out our installation instructions for coilover suspension! NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

ND Miata coilover suspension system made by Cusco of Japan for the 2016+ ND Miata. This kit is designed as more of an entry level kit, featuring a fixed damper strength with adjustable height. A kit such as this is great for those who daily drive their car, want a perfect ride height and don’t plan on racing too much. For ND RF, here are Cusco's recommendations : For street ride, they recommend front 6kgf/mm and rear 4kgf/mm. For circuit, front 7kgf/mm and rear 5kgf/mm would be good. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

Steel Roll Cage (Bar) Kit made by Cusco for the ND (2016+) MX-5 Miata. This kit is the Safety21 version, which is made of black steel and is designed as a more budget friendly roll cage kit. One of the huge benefits is the wide variety of options available for this kit, including additional bars that can be added to the cage for increased rigidity and safety. Cusco makes this cage in two versions, 4 and 6 point. The 4 point kit is limited to behind the seats while the 6 point variation extends over the driver and passenger to encompass the whole cockpit. On top of that Cusco offers an optional arch bar, that attaches the left and right of the cage together for increased rigidity. Cusco also made sure when designing this bar that the center storage cubby would still be usable. The second optional bar is the side bar, made for use with the 6 point cage. This side bar connects the front and rear of the cage together to further increase chassis stiffness. Pictures show the Standard 4 Point version.

THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.

Learn More

Dial in the camber on your ND (2016+) Mazda Miata with the Cusco Rear Upper Arms. The Cusco Upper Leading Link is designed to allow the user to adjust the camber of the vehicle improving the wear of the tires. The rear upper arm features a pillow ball bushing for the body side of the arm and features the traditional Cusco blue finish. The upper leading link allows changes to the camber specification of +10 to -10 mm. Learn More

Rear stabilizer bar kit made by Cusco for the ND (2016+) Miata. This rear bar is made of a solid material and is rated as 325% stiffer than the stock rear sway bar. This bar will have a very noticeable effect on handling. If you have an OEM rear sway bar, you don't need to buy additional hardware, just re-use OEM one. If you don't, you will need to order these pieces from your local Mazda dealership :

N243-28-170 ×1
N243-28-190 ×1
9YB04-0813 ×4
9YB04-1036 ×4

Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

Rear strut bar made by Cusco for the ND Miata (2016+). This part installs in the trunk to connect the left and right of the vehicle together to stiffen it up and increase handling capabilities. Note that alterations to the trunk liner will be necessary to fit this strut bar. Learn More

Rear power bracing kit made by Cusco of Japan for the ND (2016+) MX-5. This brace kit connects the rear of the chassis to the rear suspension member in order to increase traction for the rear. Cusco wished to “smooth” out the traction of the Miata by creating these rear brace bars which reduce some of the twist in the rear of the vehicle. Learn More

Improve the feel of the ND (2016+) Mazda Miata with the Cusco Rear Lateral Link (Rear Side). The traditional Cusco blue finish lower lateral link stops the lateral movement of the rear tires. By reducing the lateral movement of the rear tires, the tires remain round during rotation to increase the predictability of the vehicle mid corner. The Cusco Rear Lateral Link (rear Side) features a pillow ball bushing for smooth, quiet function and allows changes to the toe specification of +10 to -10 mm. Learn More

Improve the feel of the ND (2016+) Mazda Miata with the Cusco Rear Lateral Link (Front Side). The traditional Cusco blue finish lower link stops the lateral movement of the rear tires. By reducing the lateral movement of the rear tires, the tires remain round during rotation to increase the predictability of the vehicle mid corner. The Cusco Rear Lateral Link features a pillow ball bushing for smooth, quiet function and allows changes to the toe specification of +10 to -10 mm. Learn More