The Nielex Excellent Tower Bar for NC (2006-2015) has been around for a while and they just released their Version-II. Back when they released the Version1, the angles for cutting the mounting points in stainless steel couldn’t be obtained in 3D (too difficult), but now it’s totally possible. The Version2 now has exceptional rigidity and does not have any bending making it extremely rigid. The stainless steel material also gives it a very exotic/luxury look. The 8-point tower bar reinforces 8 different points and improves torsional rigidity vertically and horizontally. Its trapezoidal form also provides maximum support to the sides and prevents twisting and displacement in the engine bay. Lightweight and easy to bolt on, it can be installed in an hour with no drilling required!Please note that fitting this to a NC2 or NC3 will require removal of sound enhancer tube. Learn More

Product made by Nielex. The original front knuckles lack the sufficient hardness of the lengthwise direction in the structure. The drivers feel that the strength of the handling is not good enough especially when they drive in cornering at the high-speed because the deflection of the knuckles is very obvious. Nielex thought up the Front Knuckle Arm Support in order to solve these problems. While we were developing this new product, we were able to get advices from Mr. Oda who used to work for Mazda for a long time and were in charge of the development of chassis and suspension of Mazda's sports cars. Once the driver installs this product, I can say that everybody can feel the wonderful effect. It can be felt even during the low-speed drive. The most impressive effect can be felt when a car runs at over 140km/h, and the driver can feel that the handling gets more stable. NA with ABS : you will need to re-route the cable of the ABS sensor. Learn More

Made in Japan, the Nielex Front Fender Brace improves the front rigidity of your NC1 & NC2 MX-5 (2006-2012) Roadster. When combined with chassis stiffening and the Nielex Front Strut Bar, your roadster’s body becomes even more rigid and stability is dramatically improved at high speed and when cornering. The best part is the rust-proof kit is 100% bolt-on and easy to install. Learn More

Hi-Spec series of semi-rigid differential mounts made by Leg Sports for the 2006 to 2015 NC MX-5 Miata. Leg Sport has tested many different hardness to find the best compromise for high performance while not compromising the street driving capability of the car. Learn More

Original door bushing (dove tail/cups) designed by KenAuto in Japan. This is the thickest possible size and most effective door bushing on the market used by thousands on Japanese Roadsters in the circuit. This piece is a replacement for the stock part that the door sits on when closed. By replacing the brittle stock unit, you’ll notice more steering response and less suspension wiggle. This piece will do a great job of stiffening up your Miata. Installs in minutes and creates a noticeable difference in drivability. Some of the JDM shops such as Joyfast & TUCKIN99 had very high praise for the part and use them on all their race cars now! Learn More

Master Spec differential mount made by Integral Kobe of Japan for the NC (2006-2015) MX-5 Miata. Those are made to reduce the movements from the rear differential, improve response during shifting up and traction performance. Learn More

Front And Rear Stabilizers Bars made by Cusco for the NC (2006-2015). This bar will have a very noticeable effect on handling. It will increase stability during cornering and high speed lane changing. Please note that the images are generic images, the actual sway bar shape will be slightly different. Learn More

Height adjustable suspension kit made by Cusco in Japan for the NC (2006 to 2015) MX-5 Miata. It has 40 possible adjustment from damping and can be lowered -87mm in front and -52mm in the rear. It comes with front and rear reinforced rubber upper mounts. Regular spring rate is 6kgf/mm front (7kgf/mm available) and 4kgf/mm rear (5 & 6kgf/mm available) but can be changed for free. Optional E-CON2 controller (damping force) available. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

Coilover suspension system made by Cusco of Japan for the 2006-2015 NC Miata. This kit is designed as more of an entry level kit, featuring a fixed damper strength with adjustable height. A kit such as this is great for those who daily drive their car, want a perfect ride height and don’t plan on racing too much. Please note that even though the picture (generic) shows upper mounts, this suspension reuses OEM upper mounts and the Cusco Blue upper mounts are not included. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More