You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
Browse By
- Category
-
- Exterior (135)
- Special Edition Parts (0)
- Wheels & Brakes (91)
- Suspension & Chassis (36)
- Engine (64)
- Drivetrain (18)
- Interior (194)
- NC Specials & Preloved (2)
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
NC (06-15)
-
Garage Vary Rear Diffuser
$549.99Product from JAPAN made from high quality FRP or Carbon Fiber. Gives a subtle but noticeable change to the look of the car by making it more aggressive. DISCONTINUED AND NO LONGER AVAILABLE. Learn More
Out of stock
-
ZOOM Cellphone Holder
$99.99Product from JAPAN made by ZOOM. Great to transform your cellphone into a GPS. Head moves up, down, left and right. DISCONTINUED Learn More
Out of stock
-
Odula R-Spec Exhaust Ver2
$1,049.99The Odula R-Spec Exhaust for NC (2006-2015) MX-5 Miata is a single-tip exhaust with beautiful titanium-look tail. It’s made of SUS304 and has a 60mm diameter piping and a 100mm tip size. Learn More
-
Liberal Cluster Cover
$124.99Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. The Liberal item is only the leather piece that goes over the OEM cluster (installation is easy). Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Liberal Door Pull Cover
$119.99Product from JAPAN made by LIBERAL to enhance the door pull feel. Subtle and stylish touch to the interior. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Liberal Armrest Cover
Regular Price: $184.99
Special Price $164.99
Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Carbing Front Strut Bar Type 2
$724.99 As low as: $674.99Aluminum 3 point front strut tower bar made by CARBING for the NC (2006-2015*) MX-5 for maximum chassis rigidity. You cannot get a better strut bar than this. Note : If your car does not have an OEM strut tower bar, you need to get the Air Cowl Panel & Nuts (see options). Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Nielex Round Chrome Shift Knob
$124.99Product from JAPAN made by Nielex. Chrome type shift knob. Learn More
-
Zoom Side Markers
$129.99Side Markers from JAPAN made by ZOOM ENGINEERING for the NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. Nice addition for those looking for a retro exterior. Learn More
-
Zoom Ventilation Cup Holder
$79.99Drive your Miata MX5 in style with a modern and futuristic vent cup holder from Zoom Engineering. Attach them easily to your vent slat and fins and keep your favorite drink cold and steady while driving. They come in handy especially for cars with no built-in cup holders. Stylish, subtle and easily removable, these cup holders come in 6 colors to match your car interior and personality. Only available for Miata models from all years. Polished finish has been discontinued and no longer available. Learn More
-
TUCKIN99 Brake Duct
$349.99Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Functional and makes the bumper more aggressive. Learn More
-
TUCKIN99 Front Bumper Grille
Regular Price: $569.99
Special Price $424.99
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive. Learn More
-
TUCKIN99 Rear Bumper Skirts
$499.99Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive and lower. Learn More
-
Liberal Handbrake Boot
$94.99Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. Every product is available with custom stitching color. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Liberal Roll Bar Cover
$174.99Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. Every product is available with custom stitching color. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Liberal Shift Boot
$94.99Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. Every product is available with custom stitching color. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Beatrush Rear Strut Bar
$249.99If you want a smooth and steady ride, the Beatrush rear strut bar ensures better overall handling particularly when cornering. The bar brings the strut towers together and secures the shocks, preventing them from moving independently. By enhancing chassis rigidity and preventing warping, it assures smoother suspension movement when you drive. Available for all Miata models from all years. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Daikei Boss Hub Kit
$89.99High quality boss hub kit from Japan made by DAIKEI for the NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. Steering wheel adapter that fits Nardi, MOMO, Mazdaspeed, Sparco every other compatible steering wheels with Nardi and MOMO. Please note that installing a non-airbag version in an airbag equipped vehicle may require modification and REV9 is not responsible for fitting problems. Scroll down the page to see why.
If you are looking for the boss hub kit for a 2016+ ND MX-5, click here. Learn More
-
KEY!S Original Steering Wheel
$374.99Genuine KEY!S Racing Steering Wheel imported from Japan. This is a brand new item. FLAT is the round shape steering wheel with fat spokes. DEEP has thin spokes and round holes in the spokes. SEMI-DEEP is same shape as FLAT, but with deeper spokes. SEMI-DEEP D-Shape is same as SEMI-DEEP but with D-Shape instead of round. Learn More
-
KEY!S Fossa Magna Steering Wheel
$374.99Genuine KEY!S Racing Steering Wheel imported from Japan. This is a brand new item. Learn More
-
RiGiD Shift Knob
$59.99Product from JAPAN made by RiGiD. Prevents mis-shifts and helps faster shifting. Please scroll down for technical specifications about the 2 shift knobs models. Learn More
-
-
Beatrush Shifter Collar
$34.99Created to reduce shaft play when shifting, this Beatrush shifter collar from Japan is available for 5-speed and 6-speed manual transmissions. Made of high grade aluminum, it reduces slack time when shifting gears, providing added driving comfort and improving traction performance. Exclusively for all NA & NB Miata models and NC1 MX-5 (2006-2008) models. It does not fit newer models NC2/NC3 MX-5 (2009-2015). Learn More
-
Beatrush Rear P.P.F. Bar
$169.99Produced in collaboration with Laile, the motorsports expert, the lightweight yet strong Beatrush rear Power Plant Frame (PPF) bar improves your car’s responsiveness and body rigidity. Made of aluminum and steel, it makes the suspension movement more precise and enhances steering response as well as traction. Tested on race tracks in Japan. Fits all NA/NB Miata cars, except 89-93 models. Learn More
-
Beatrush Front Strut Bar
Regular Price: $389.99
Special Price $349.99
Feel the difference in handling and cornering with the Beatrush front strut bar produced by Laile in Japan. Made of lightweight yet durable tubular aluminum, it improves body rigidity and prevents chassis flex at the front suspension mounting points. By keeping the mounting points secure, it ensures a more stable drive. Only available for NC Miata (2006-2015) models. Learn More
-
Beatrush Front Performance Bar
Regular Price: $369.99
Special Price $324.99
Product made by Beatrush. The Beatrush front performance bar improves chassis rigidity. You'll be able to feel the difference in cornering/handling. Learn More
-
Beatrush Rear Performance Bar
Regular Price: $549.99
Special Price $474.99
The strong yet lightweight Beatrush rear performance bar was produced in partnership with Laile to improve your Miata’s handling and responsiveness on the road. This durable aluminum bar firmly secures the entire rear to stiffen the structure around the rear suspension, improving feel and reducing body twist. Designed exclusively for NC Miata (2006-2015) models. Learn More
-
Beatrush Intake Kit
Regular Price: $549.99
Special Price $474.99
Product made by Beatrush. This beautiful Beatrush intake kit will not disappoint you. The quality is superior. The box type intake blocks heat from your air filter, allowing you to draw cooler air into your engine. Learn More
-
Garage Vary Eye Lids
$134.99Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Before painting, please make sure the product fits the car properly. Please note that if you have a NC3, you can get the NC2 model and it will fit with a small gap. Learn More
-
Garage Vary Rear Spoiler Type-1
$299.99Product made by Garage Vary. Want a nice subtle change to the rear of your car? The Garage Vary Type-1 rear spoiler is the way to go. Nice and sleek. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Rear Spoiler Type-2
Regular Price: $274.99
Special Price $254.99
Product made by Garage Vary. Want a nice subtle change to the rear of your car? The Garage Vary Type-2 rear spoiler is the way to go. Nice and sleek. Please note that debadging is necessary to fit this spoiler. Before painting, please make sure the product fits the car properly. Learn More
-
Nielex Front Knuckle Arm Support
$199.99Product made by Nielex. The original front knuckles lack the sufficient hardness of the lengthwise direction in the structure. The drivers feel that the strength of the handling is not good enough especially when they drive in cornering at the high-speed because the deflection of the knuckles is very obvious. Nielex thought up the Front Knuckle Arm Support in order to solve these problems. While we were developing this new product, we were able to get advices from Mr. Oda who used to work for Mazda for a long time and were in charge of the development of chassis and suspension of Mazda's sports cars. Once the driver installs this product, I can say that everybody can feel the wonderful effect. It can be felt even during the low-speed drive. The most impressive effect can be felt when a car runs at over 140km/h, and the driver can feel that the handling gets more stable. NA with ABS : you will need to re-route the cable of the ABS sensor. Learn More
-
Stage21 Front Lip
$284.99Product made by Stage21. High quality front lip. Gives a nice change to the look of the car by making it more aggressive. It will also make the car more stable at high speed. Learn More
-
NOPRO Hood Ventilation
Regular Price: $399.99
Special Price $349.99
Product made and tested by NOPRO to help engine cooling. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Joyfast Original Shift Knob
Regular Price: $124.99
Special Price $104.99
Experience easier shifting and maneuverability with our range of JoyFast steel shift knobs. Made of stainless steel with a polished finish, each shift knob has an easy to grip design for added comfort when driving. Choose from three different weights and sizes - 64mm, 84mm and 90mm. Designed exclusively for Miata cars, installation is hassle-free. Learn More
-
Carbing High Grip Competition Shift Knob
$109.99Product from JAPAN made by Carbing. These shift knobs are made to prevent slip and have CARBING engraved logo. The black color is made of Duracon and weights 65g while other colors weight 125g and are made of aluminum. Gunmetal has been discontinued and no longer available. Learn More
-
Nardi Evolution Leather Shift Knob
$129.99Product made by Nardi. Very nice item for those looking for a matching leather shift knob. Also known as Nardi "Mushroom" Shift Knob. Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
ZOOM Handbrake Boot
$94.99Product made by Zoom. Subtle and stylish touch to the interior. Learn More
-
ZOOM Wide Angle Blue Side Mirror Lenses
$169.99Product made by Zoom. Can't see much with your stock mirrors? Zoom provides you with their wide angle mirror lenses with blue tint to reduce glare at night. Learn More
-
NOPRO Fender Flares
$554.99Product made by NoPro. Made from high quality FRP. The perfect route to go for that wide stance look. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
OS Giken Super Lock LSD
Regular Price: $1,499.99
Special Price $1,299.99
The SuperLock Limited Slip Differential is known as one of the best available on the market for the Mazda Miata. It’s available for NA (1.8L), NB (1.8L) and NC (2.0L) chassis (1989-2014) and will help improve lap times during racing. It’s also made to handle a lot of abuse, so don’t hesitate to test it with slick tires. It has been tested with many vehicles and even with 150,000km (90,000 miles) of use, it does not show any wear. During endurance race or time attack, there are no decrease in locking due to heat. Since it locks 100% during drag starts, there is less pressure on the drive shaft and less possible damage to it! At end of corners, it’ll have a smooth transition to full lock and help driving stability as well as traction. Please note that vehicles with Viscous LSD need these items to fit the OS Giken LSD: -Mazda Side Flange x2 (Part #P019-27-270B) -Mazda Snap Ring x2 (Part #P016-27-421) Learn More
-
Nielex Magical Cross Bracing (2.0L Chassis)
$1,349.99 As low as: $1,099.99Nielex made the NC Magical Cross right after testing the 2006 MX-5 at high speed and concluded that it needed improvement for high speed cornering. They did not see NC as evolution from NA and NB and wanted to create the perfect chassis stiffness. As a result, they made a Magical Cross for it and now it’s a very popular product in Japan (most Japanese tuners use this product). It improves steering responsiveness and also helps keep tires to the ground for much more traction during cornering. It also reduces frame twist drastically to have a more stable and neutral car. It basically transforms the car into a real fun go kart that you can enjoy driving in the streets or at the track. It is even more effective when combined with the Pro-Spec Knuckle Arm Support! Learn More
-
RS Watanabe Lug Nuts
$194.99These stainless lug nuts by RS Watanabe Japan for Mazda MX5 models make your wheels look great and protect them, too. Ideal for RS Watanabe original wheels, these aluminum anodized nuts have a sporty design and durable quality. Choose from black and silver nuts engraved with the RS Watanabe symbol to make your rims stand out. Only available for NA Miata (1989-1997) and NB Miata (1998-2005) models. Learn More
-
Joyfast GT400 Shift Extender
$114.99Shifter extension made by JoyFast. Made from stainless steel. Designed to give you more leverage with a short shifter kit, and closer reach from the steering wheel. It is 90mm long (9cm) and brings the shifter closer to the driver for a more precise experience during daily driving or racing. Learn More
-
RS Factory Stage Jimmy Shift Knob
$99.99Product made by RS Factory. The short version is made of stainless steel & the long version is made of aluminum. Learn More
-
Works Bell Airbag Eliminator
$29.99Airbag defeat module made by Works Bell that is used to remove the annoying flashing airbag light on your race car! It can be used for the driver or the passenger side. It is available for ALL YEARS Mazda MX-5 Miatas. Learn More
-
Joyfast Short Antenna
$79.99Product made by JoyFast. Designed for those who still want to be able to use their FM radio without having a 3 feet tall antenna. Those using electric antenna may require slight modifications to fit (using OEM fixed antenna base). Learn More
-
Nardi Evolution Wood Shift Knob
Regular Price: $139.99
Special Price $123.56
Product made by NARDI. Subtle and stylish touch to the interior. Matches Nardi Steering Wheels & OEM Wood Handbrake Handle. Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
NOPRO High Flow Intake Elbow
Regular Price: $229.99
Special Price $214.99
Product made by NOPRO in collaboration with ODULA. By replacing the soft bellows to this high-flow intake that is made from silicon fibers, you can enjoy the better engine response. Blue color has been discontinued and no longer available. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Zoom LED Side Markers
$139.99Side Markers (Blinkers) with LED light made by ZOOM ENGINEERING for the NA, NB or NC (1989-2015) MX-5 Miatas. Nice addition for those looking for a retro exterior. Learn More
-
Project Kics Kyokyugen L42 & L50 Lug Nuts
Regular Price: $174.99
Special Price $129.99
Lug nuts from Japan made by KICS available in 42mm and 50mm size with either gold or black finish. It is close ended and will give your wheels a clean & raw look. Learn More
-
Garage Vary Hardtop Rain Rails
$144.99Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the hardtop more functional when it rains or after a shower. Before painting, please make sure the product fits the car properly. Learn More
-
Nakamae Original Shift Knob
Regular Price: $169.99
Special Price $149.99
Product from JAPAN made by NAKAMAE. This is the perfect piece to finish off your interior, comes with a nice match of leather and perforated leather to give a sporty look. Nakamae item #1005. Learn More
Out of stock
-
Daikei Polished Steering Wheel Bolts
$26.99Product made by Daikei for those who want different looking steering wheel bolts. Please note that they may differ a bit in look due to the stamping process (manufacturing). Learn More
-
Daikei Race Horn Button
$49.99Product from Japan made by Daikei. Compatible with MOMO steering wheels. Learn More
-
Nardi Classico Steering Wheel 330MM Black Leather With White Spokes
Regular Price: $323.57
Special Price $313.87
Genuine Nardi Steering Wheel imported from Italy. Learn More
-
Nardi Deep Corn Steering Wheel 350MM Black Perforated Leather With White Spokes
Regular Price: $334.79
Special Price $318.05
Genuine Nardi Steering Wheel imported from Italy. Learn More
-
Nardi Classico Steering Wheel 340MM Wood With Polished Spokes
Regular Price: $425.41
Special Price $399.89
Genuine Nardi Steering Wheel imported from Italy. Learn More
-
Nardi Deep Corn Steering Wheel 350MM Black Perforated Leather With Black Spokes
Regular Price: $334.79
Special Price $318.05
Genuine Nardi Steering Wheel imported from Italy. Learn More
-
Nardi Deep Corn Steering Wheel 350MM Black Suede With Black Spokes
Regular Price: $334.79
Special Price $318.05
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Beatrush Anodized Airhorns
$299.99Product made by Beatrush. Fits most carburetors (including Jenvey IRTB Kit). Learn More
-
Jubiride Mesh Filters
$104.99Product from JAPAN made by Jubiride. Does not reduce the airflow by much and prevents getting dirt inside the engine. Fits most carburetors (including Jenvey IRTB Kit). Learn More
-
Nardi Deep Corn Steering Wheel 350MM Wood With Black Spokes
Regular Price: $411.40
Special Price $385.89
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn Steering Wheel 350MM Wood With Polished Spokes
Regular Price: $479.60
Special Price $445.62
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn Steering Wheel 330MM Black Perforated Leather With White Spokes
Regular Price: $334.79
Special Price $318.72
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Kallista (75th anniversary) Steering Wheel 350MM Black Leather With Polished Spokes
Regular Price: $387.11
Special Price $369.69
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 330MM Black Suede With Black Spokes
Regular Price: $323.57
Special Price $313.87
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 330MM Black Leather With Black Spokes
Regular Price: $323.57
Special Price $313.87
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn Steering Wheel 330MM Wood With Black Spokes
Regular Price: $411.40
Special Price $385.89
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Daikei Steering Wheel Adapter
Regular Price: $49.99
Special Price $39.99
Product made by Daikei for those who want to re-use MOMO hubs with Nardi steering wheels or the other way around. Learn More
-
Nardi Classico Steering Wheel 330MM Wood With Polished Spokes
Regular Price: $425.41
Special Price $399.89
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
ARC Titanium Shift Knob
$274.99Created for innovative Mazda Miata enthusiasts, this ARC shift knob made of titanium will help you change gears with confidence. Available in two finishes, polished and matte, the knob’s lightweight titanium increases the accuracy of your shift change, whether you’re going for long or short drives. Its eye-catching color also serves as a conversation starter in your car. Learn More
-
Nielex Accelerator Pedal
$124.99Product from Japan made of high quality aluminum. Made by Nielex. Learn More
-
Jet Stream License Plate Holder
$109.99Product made by Jet Stream. Get rid of your stock license plate holder for this beautiful FRP or Carbon Fiber piece. Learn More
-
Jet Stream Rear Spoiler Type-1
$349.99Product made by Jet Stream. Want a nice aggressive change to the rear of your car? The Jet Stream Type-1 rear spoiler is the way to go. Nice and sleek. Learn More
-
Jet Stream Rear Spoiler Type-2
$374.99Product made by Jet Stream. Want a nice subtle change to the rear of your car? The Jet Stream Type-2 rear spoiler is the way to go. Nice and sleek. Please note that the F1 spoiler is not included in the price, it is only the ducktail spoiler. Learn More
-
Jet Stream Clubman R01 Front Lip
$549.99Product made by Jet Stream. Very aggressive front lip that gives additional downforce to NC vehicles. Learn More
-
R-Magic Heavyweight Shift Knob
$114.99Shift Knob made by R-Magic. With its 510g, it's one of the heaviest shifter knob available on the market! It prevents mis-shifts and helps provide smoother shifting.
Read our full R-Magic Heavyweight Shift Knob Review
Learn More
-
SARD Fuel Pressure Regulator
Regular Price: $249.99
Special Price $199.99
SARD fuel regulator offers appropriate fuel pressure for high-performance application. SARD fuel pressure regulator also allows an increase of factory injector discharge rate by configuring fuel pressure. Learn More
-
Zeromotive Aluminum Pedal Kit
$174.99Product from Japan made of high quality aluminum. Made by Zeromotive. Please note that the dead pedal will NOT work with Left Hand Drive (LHD) vehicles. Learn More
-
Mazdaspeed Radiator Cap
$74.99Product from JAPAN made by Mazdaspeed. One of the best radiator cap on the market. Learn More
-
Jet Stream Clubman R01 Side Steps
Regular Price: $499.99
Special Price $484.99
Product made by Jet Stream. Very aggressive side steps that gives lower look to NC vehicles. Learn More
-
Nardi Classico Steering Wheel 360MM Wood With Black Spokes
Regular Price: $428.21
Special Price $399.95
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Enkei Japan Racing PF01 17" Wheel
$329.99Made with Enkei’s MAT technology, the PF01 is a light, racer-friendly wheel. It has plenty of clearance for large brake calipers. The new PF01 is a high quality, very lightweight wheel offered at a competitive price.
Utilizing Enkei’s MAT flow-forming technology, the PF01 is designed to be an ultra lightweight wheel. The PF01 is engineered to take Enkei’s light-weight racing wheel line to the next level. PF01’s split five-spoke design represents its lightness and sporty feel. The subtle edge on the sides of the spokes adds a unique dimensional accent to its design.
Our unique roulette pattern is grooved on the rim to reduce the slippage ratio between tire and rim. The roulette-pattern maintains the best condi- tion of the wheel and tire assembly, thus achieving the highest perfor- mance during extreme acceleration and deceleration. The roulette pattern is also used for McLaren Mercedes Formula One racing wheels.
Learn More
-
TRS Tow Strap
$19.99Product made by TRS. Available in plenty of colors and solid enough to be used for emergency. It is an universal part that requires a custom mount/bolting to the factory tow hooks. Learn More
-
Garage Vary Aero Mirrors
$524.99Product from Japan made by Garage Vary. Made of high quality FRP. The width of the mirror glass is 130mm. Carbon Fiber version has been discontinued and no longer available. Learn More
-
Garage Vary Front Lip
$349.99 As low as: $299.99Product made by Garage Vary. Very aggressive front lip that gives additional downforce to NC vehicles. Learn More
-
Garage Vary Front Bumper Grille
$374.99Product from JAPAN made by Garage Vary. Changes the front end of the vehicle. Makes the bumper look more aggressive. Learn More
-
Garage Vary Vented Hood
$749.99Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Car Make Corn's Black Leather Racing Seat
$984.99Beautiful black synthetic leather racing seats made by Car Make Corn's. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. TAN LEATHER IS DISCONTINUED Learn More
-
Car Make Corn's Fabric & Mesh Racing Seat
$884.99Black fabric racing seat with many stitching color option made by Car Make Corn's. The back portion is made of a mesh material making it flexible and comfortable. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Please note that some photos show single stitching, but the seats now come with double-stitching. Learn More
-
Nardi Deep Corn Steering Wheel 330MM Wood With Polished Spokes
Regular Price: $479.60
Special Price $442.96
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn Steering Wheel 330MM Black Perforated Leather With Black Spokes
Regular Price: $334.79
Special Price $318.72
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 340MM - Black Leather With Black Spokes
Regular Price: $327.31
Special Price $317.49
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 360MM Black Leather With Polished Spokes
Regular Price: $344.13
Special Price $331.74
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Prestige Wood Shift Knob
Regular Price: $109.72
Special Price $102.06
Product made by NARDI. Subtle and stylish touch to the interior. Matches Nardi Steering Wheels & Zeromotive Handbrake Handle. Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
Nardi Classico Steering Wheel 360MM Wood With Polished Spokes
Regular Price: $459.98
Special Price $425.48
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 340MM - Black Leather With White Spokes
Regular Price: $327.31
Special Price $317.49
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 330MM Black Perforated Leather With Black Spokes
Regular Price: $338.52
Special Price $326.67
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 360MM Black Perforated Leather With Black Spokes
Regular Price: $349.73
Special Price $335.74
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Beatrush Harness Bar
$254.99Product from Japan made by Beatrush. It is basically made for those who want to run a harness but don't have a roll bar OR their roll bar does not have harness holes. This product gives the car body greater rigidity and also offers a handsome finish. This can be mounted even with four-point seat belts for two-seaters. Once installed, you can still use factory (OEM) seatbelts for both driver and passenger side. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Beatrush Front Tow Hook
$124.99Product from JAPAN made by BEATRUSH that has JAF regulation compliance. Made for looks, but is solid enough to be used for emergency. Learn More
-
TUCKIN99 Front Lip
$699.99Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive. Very aggressive front lip that gives additional downforce to NC vehicles. Learn More
-
NOPRO Rear Spoiler
$599.993 Pieces Rear Spoiler made by NOPRO to give the rear of the vehicle a wider look. It's also available for PRHT : NOPRO PRHT Rear Spoiler.
Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Beatrush Shift Knob Type-E Titanium
$164.99Product made from a titanium bar and comes with engraved shift pattern. Finish is impeccable and very durable. Learn More
-
Autoexe Leather Shift Knob (Stick Shape)
Regular Price: $124.99
Special Price $104.99
Product made by AUTOEXE to add a touch of luxury and sportiness to the interior of the vehicle. It feels great in hand and looks pretty awesome. Black anodized aluminum with Autoexe logo engraved on top of the shifter sure makes it a high quality item. 2025 UPDATE : Now available in Red, Black or Light Gray Stitching Option AND Height Adjustable! Learn More
-
Jet Stream PRHT Ducktail Spoiler
$339.99Product made by Jet Stream to improve the look of the rear end of the vehicle. It is made especially to fit NC with power retractable hardtop (RHT). It will hide the third brake light and requires removal of Mazda badge on the trunk. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
RS Factory Stage NC1 to NC2 / NC3 Headlight Conversion Kit
Regular Price: $199.99
Special Price $174.99
Product from RS Factory Stage for those who want to do a bumper conversion on their first generation NC (NC1) to newer NC2 or NC3 on a budget. It allows the vehicle to keep the NC1 headlight while having NC2 or NC3 bumper by filling gap between the bumper and the headlight.
A lot of money is saved by keeping NC1 headlights and the conversion is also much simpler that way. All that is needed to be done is a bumper swap.
Learn More
-
Nardi Classico Steering Wheel 360MM 60th Anniversary Edition
Regular Price: $644.03
Special Price $580.92
Original steering wheel with wood grip and polished aluminum center. The 60th Anniversary Edition has different type spokes with round holes instead of regular lines. As per with all Nardi products, it holds its value very well and gives the interior a much higher quality look. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Daikei Steering Wheel Spacer
Regular Price: $49.99
Special Price $34.99
Item from Daikei that is made to bring the steering wheel closer to the driver. It comes in sizes from 10MM to 30MM with 5MM increment. It comes with screws for MOMO steering wheels. If you have a Nardi Steering Wheel, please use locally sourced M5x0.8 bolts (length depends on the spacer you'll use)). Learn More
-
Maxim Works Manifold
$1,899.99Header made by Maxim Works to gain maximum power from the engine. It is a piece of art as well as the most efficient header available on the market. The price justifies the gains from this header. It is used by all racers in Japan as it's the best manifold money can get. Learn More
-
NOPRO Rear Diffuser
$717.99Rear underspoiler made by NOPRO. It helps cooling the rear differential and will also improve downforce. Cutting to the bumper is required to install this part. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Jet Stream Top Nose Duct
$209.99This product is made to bring more air to the engine bay of NC3 vehicles. You simply replace your OEM bumper piece for this item and you’re all set. It is best to use it with their Jet Stream Ram Super Intake for higher power input.
NC2 : Please note that this piece will require body work and fitting onto the OEM grille. This is not as plug-and-play as the NC3 version.
Learn More
-
Jet Stream Ram Super Intake
$349.99Product developed by Jet Stream to work in conjunction with the Jet Stream Top Nose Duct. It’ll provide extra power and torque at high speed because of the increased airflow directed to the air intake. Another nice benefit is that it'll drop engine bay temperature by 3-4 degrees. Removal of the bumper is required to install this part.
Learn More
-
Jet Stream Type-01 Side Steps
$599.99Side steps made by Jet Stream for latest generation NC2 and NC3 (2009-2013). Very aggressive side steps that gives lower look to NC MX-5. The Type-01 is the regular version and the Type-01R has the black fins on it (makes the vehicle lower). Learn More
-
Jet Stream Tail Lights Cover
$239.99Tail lights cover made by Jet Stream from high quality FRP. Sticks onto your stock tail lights with double sided tape. Makes the rear end of the vehicle look much sleeker. Learn More
-
Jet Stream N-Zero Front Lip
$674.99Front Lip made by Jet Stream for 2009-2012 NC MX-5s that is very aggressive looking. It was developed for Japan Roadster Cup and ran by Fuji race champion. The front lip has side canards and under-diffusers that help generate more downforce! Learn More
-
NOPRO PRHT Rear Spoiler
$674.99Spoiler made by NOPRO that is three pieces with goal to give the rear of the vehicle a wider, lower look. It's also available for non-PRHT vehicles : NOPRO Rear Spoiler.
Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Autoexe NC-03 Side Steps
Regular Price: $799.99
Special Price $597.99
Side skirt made by Autoexe. Very subtle and classy change to the side of the vehicle. Makes it look lower and flows really well with the lines of the car. These are replacement side skirts (does NOT install over OEM ones, they replace them). Learn More
-
Odula Carbon Fiber GT Wing
$1,299.99Product made by Odula to improve downforce and help stabilize cornering while racing at the track (high speed). The high mount version was first made for track and tested while racing on their shop car, but then they created the low mount version for styling purpose (both versions work with PRHT). LOW TYPE IS DISCONTINUED, ONLY HIGH TYPE REMAINS (SAME AS PICTURES). Learn More
-
Integral Kobe Fender Canards
$249.99Product made by Jet's (Integral Kobe). The fender canards is a new product they tested and built at the track. They liked the look and gains from it, so they decided to offer it to the public. It generates downforce by controlling the flow of air to the fenders and improve stability at high speed as well as cornering. Learn More
-
Integral Kobe Master Spec Front Canards
Regular Price: $299.99
Special Price $274.99
Product made by Jet's (Integral Kobe) for the MX-5 NC-1 and NC-2 (06-12). The master spec canards are made to flow well with the lines of the vehicle and add downforce (track tested). It'll work most efficiently at high speed and while cornering. Learn More
-
Nardi Deep Corn Steering Wheel 330MM Black Suede With Black Spokes
Regular Price: $334.79
Special Price $318.72
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Competition Steering Wheel 330MM Black Perforated Leather With Black Spokes
Regular Price: $301.15
Special Price $289.99
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 340MM Wood With Black Spokes
Regular Price: $463.25
Special Price $407.66
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 360MM Wood With Satin Spokes
Regular Price: $448.77
Special Price $417.35
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Gara Sport 350MM Steering Wheel
Regular Price: $363.75
Special Price $346.44
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico (Round Holes) Steering Wheel 360MM Wood With Polished Spokes
Regular Price: $573.96
Special Price $521.16
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Twin 350MM Steering Wheel
Regular Price: $329.18
Special Price $318.05
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Zeromotive Needle Caps
Regular Price: $119.99
Special Price $114.99
Product from Japan made from high quality aluminum that is finished very nicely and includes 3 small caps and 2 bigger ones It’s a very minimalistic product that really enhances the look of the dashboard. Installation is very easy once the meter panel is removed. Learn More
-
Jet Stream Underdiffuser
$1,049.99Rear diffuser that’s made by Jet Stream to fit onto NC chassis vehicles. It is made for a middle-exit exhaust, but can also fit with vehicles running OEM exhausts (both sides). It is very aggressive looking and will help increase downforce and reduce lap times. It requires drilling to the bumper for installation. Learn More
-
Esqueleto Tail Lights
$949.99Tail lights made by Esqueleto in Japan. These will fit from 2006 to 2015 NC MX-5s. It's made from quality FRP and will improve the vehicle's safety as it'll be more visible at daytime, night and during bad weather. Reflector (round) is included with the tail lights. It is complete with wiring connectors, bulbs and everything to be plug and play. Please note that this piece was designed for NC1. If used on NC2/NC3, there will be a small gap near the edge of the trunk. Please see photos by scrolling down. Learn More
-
Jet Stream Front Lip & Diffuser
$499.99Front Lip made by Jet Stream that is used on their NC3 demo car (track tested) to improve looks & aerodynamics. It comes with an integrated underflap (diffuser) and has optional side flaps for even better aerodynamics. Learn More
-
Garage Vary Glide Lip Spoiler
$799.99Front Lip made by Garage Vary that was track tested and made to improve aerodynamics of the NC3 to the maximum. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Garage Vary Racing GT Wing
$699.99GT Wing made by Garage Vary for circuit use on their NC demo car. The wing itself is made of FRP and the end-plates (sides) are made of Carbon Fiber. It’s made to improve downforce of the MX5 by a lot. Learn More
-
Liberal Doorpull Cover
Regular Price: $119.99
Special Price $104.99
Product from JAPAN made by LIBERAL that adds a nice touch to the door pull of the NC2 and NC3. Subtle and stylish touch to the interior. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Nardi Deep Corn 330MM Black Leather With Polished Spokes
Regular Price: $345.06
Special Price $328.50
Genuine Nardi Steering Wheel imported from Italy. 330MM size, black perforated leather with polished spokes & red stitching. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn 350MM Black Leather With Polished Spokes
Regular Price: $345.06
Special Price $328.84
Genuine Nardi Steering Wheel imported from Italy. 350MM size, black perforated leather with polished spokes & red stitching. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Integral Kobe Master Spec NC2 Front Lip
$599.99Front Lip made by Jet’s (Integral Kobe) for 2009-2012 NC MX-5s that is made with their special 3D wing shape. The 3D wing shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More
-
NOPRO Headlight Trims
$149.99The NOPRO headlight trim is made to improve the look of the first generation NC MX-5 (NC1) and it’ll also make the vehicle look much more aggressive. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
NOPRO Cooling Hood
Regular Price: $1,174.99
Special Price $1,124.99
The NOPRO Cooling Hood has vents on the left and right side of the hood to vent the heat outside the engine bay and stabilize water temperature and oil temperature. It is made for racing, but also improves the look of the NC MX-5!THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
Out of stock
-
NOPRO Front Lip
Regular Price: $724.99
Special Price $647.99
This Front Lip is made to bring air to the interior of the front wheels and reduce brake temperature. It’s also made to improve downforce and has integrated side fins to improve aerodynamics. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
NOPRO Ducktail Rear Spoiler
$499.99Rear Spoiler made by NOPRO to improve the look of soft top equipped NC MX-5s. It’s a nice and sleek spoiler that will improve the look of your vehicle in a subtle way. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
NOPRO PRHT Ducktail Spoiler
$434.99Spoiler made by NOPRO to improve the look of RHT equipped NC MX-5s. It’s a very neat and sleek spoiler that will improve the look of your vehicle in a subtle way. Please note that "Roadster" or "MX-5" emblem and "Mazda (letters)" emblem need to be removed to install the spoiler. They can be re-installed in a lower position afterwards. The emblems are only held with adhesive (no holes). Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Garage Vary Side Skirts
$749.99Side Skirt made by Garage Vary for all generations NC MX-5 (2006-2015). It’s a nice addition that will add an aggressive touch to the side of the vehicle and improve aerodynamics at the same time. Learn More
-
Zeromotive Console Cover
$129.99Center Console Cover made by Zeromotive in Japan. It’s made of beautiful brushed stainless steel (0.3MM). It’ll add a classic and luxury look to the interior of the vehicle. Learn More
Out of stock
-
Zeromotive Gauge Panel
$124.99Gauge (Meter) Panel made by Zeromotive in Japan. It’s made of beautiful brushed stainless steel (1.5MM). It’ll add a classic and luxury look to the interior of the vehicle. Please note that only 1 hole version is available now. If you have 2 buttons, you will need to have the hole cut manually in a machine shop. Stock status is constantly changing, please contact us by email before placing order. Learn More
Out of stock
-
NOPRO Oil Cooler
$799.99Oil cooler made by NOPRO to avoid engine troubles during racing due to rising oil temperature. It’s made to lower oil temperature but will also reduce water temperature. It gets most of its air during high speed. Sits high enough to avoid most damages during off-track. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Integral Kobe Master Spec NC1 Front Lip
$674.99Front Lip made by Jet’s (Integral Kobe) for 2006-2008 NC MX-5s that is made with their special 3D wing shape. That specific shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More
-
Integral Kobe Master Spec Front Fenders
$999.99Set of fenders made by Jet’s to fit NC chassis MX-5. It’s designed with downforce in mind and to add cooling efficiency to the engine bay. It also follows the lines of the NC quite well. It is possible to re-use OEM tube liners (fender guards) inside of these fenders (some cutting into them is needed due to the duct). In order improve engine cooling more efficiently, cutting to the fender guards need to be done (can be done with scissors). Learn More
-
Integral Kobe Master Spec Side Deflector
$449.99Side deflector made by Jet’s in JAPAN. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more aerodynamic. Learn More
-
Integral Kobe Master Spec Rear Deflector
$374.99Rear deflector made by Jet’s in JAPAN. Adds some aggressive touch to the rear end of the vehicle. It will also make the car more aerodynamic. Learn More
-
Jet Stream Super Intake Chamber
$449.99Product developed by Jet Stream that's installed next to the throttle body. Proven during circuit racing, it improves power and throttle response. It's used by a lot of NC race cars and very popular product in Japan. Please note that removal of OEM Sound Enhancer is necessary to install this part. Learn More
-
Odula RS-Spec Muffler
$1,199.99Gorgeous exhaust kit made by Odula of Japan. Odula uses a glass wool silencer to create a racy exhaust note. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Liberal Cluster Cover **OPEN BOX**
$134.99Product from JAPAN made by LIBERAL. Subtle and stylish touch to the interior. LIBERAL products are considered as the best leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Saito NC 4-Point Roll Cage
$1,199.99Saito Roll Cages are the most popular racer choice in Japan. This one is designed specially for the 2006 to 2015 NC MX-5 Miatas. They are available in steel, aluminum and chromoly. Material choice will depend if you want lower weight or if it’s not a matter. These roll bars are first made to increase vehicle rigidity. It is designed to overcome the deformation and torsion of body when hard cornering. They are designed mainly to be a bracing for the vehicle and not a safety device (still, solid enough to handle the weight of the vehicle). The roll bar comes unassembled without pads.Disclaimer : Please be advised that this item has correct pricing for shipping within the lower 48 states of the United States & Canada (BC, AB, SK, MB, ON, QC & NB)
If an order is submitted with a shipping address outside of the above locations, we will need to confirm the shipping cost on a case-by-case basis. We recognize the inconvenience this may pose and appreciate your understanding, as the size of the box for this product is extremely big, it is impossible to provide live international shipping rates.
For customers residing outside the above locations who are interested in this product, we suggest that you send us an email including your full address so we can estimate the total cost to your destination.
Learn More
-
Garage Vary Rear Diffuser
$499.99Rear diffuser made by Garage Vary. It's available with 3 variations : diffuser only, diffuser + center flap & diffuser + slit spoiler. It helps improve downforce. Cutting to the bumper is required to install this part. Learn More
-
Garage Vary NC Hardtop (Fastback)
$2,999.99This is Garage Vary's original hardtop design for NC chassis Roadster. It's a fast back that will allow the use of the trunk, but will also improve the look of the vehicle. You can buy the hardtop only (including rear & side windows) or with all necessary hardware. THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION (EXCEPT TO USA ADDRESSES). WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING. Learn More
Out of stock
-
NOPRO Rear Underspoiler
$699.99Rear underdiffuser made by NOPRO. It helps cooling the rear differential and will also improve downforce. Available with fins for extra aerodynamics. Cutting to the bumper is required to install this part. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Daikei Polished Boss Cover
$74.99Chrome boss hub kit cover (garnish) that will fit onto Daikei hubs! It will change the look of your cockpit for a more refined/vintage one. It’s very easy to install and quality is top notch.
Please note that it's only a cover, not a full boss hub kit. Click here for the Daikei Boss Hub Kit.
Learn More
-
TUCKIN99 Short Antenna Ver1
$79.99Short antenna made by TUCKIN'99 to improve the look of the exterior of the NC (2006-2015) & ND MX-5 (2016+). It's a direct replacement to the OEM antenna. You can see some great pictures from our shop car in this blog post.
Learn More
-
Nielex Front Fender Brace
$299.99Made in Japan, the Nielex Front Fender Brace improves the front rigidity of your NC1 & NC2 MX-5 (2006-2012) Roadster. When combined with chassis stiffening and the Nielex Front Strut Bar, your roadster’s body becomes even more rigid and stability is dramatically improved at high speed and when cornering. The best part is the rust-proof kit is 100% bolt-on and easy to install. Learn More
-
Nielex Rear Bulkhead Brace
$549.99Maneuver with confidence and improve your sportcar’s rigidity with the Nielex Rear Bulkhead Brace exclusively designed for the NC MX-5 (2006-2014) model. Made of SUS304 Stainless Steel, the durable brace is installed between the OEM roll bar and rear bulk head. With no welding required, expect a great improvement in the handling of your vehicle after easy bolt-on installation! Learn More
-
Mazda Roadster (ND) JDM Emblem
$34.99Original "Roadster" badge from JDM (Japan-spec) 2016+ ND Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. Learn More
-
Tein Flex Z Adjustable Suspension
Regular Price: $899.99
Special Price $849.99
The Tein Flex Z is a coilover suspension for those who want to have a perfect ride height (without any sacrifice on ride quality) on their NC MX-5 and also be able to adjust damping. It’s a high quality part made in Japan with high quality standards. It has a twin-tube structure (for low resiliency and securing sufficient stroke) and the kit is complete with top mounts. It’s also possible to replace the shock only when it’s worn out. SHIPS STRAIGHT FROM JAPAN, MINIMAL WAIT TIME NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
TK Style Front Lip
$309.99Front lip spoiler made by TK Style for the NCEC-1 (2006-2008) MX-5. High quality front lip made of Carbon Fiber and FRP (2 pieces). Please note that the Carbon Fiber finish is not UV coated and it is recommended to have it coated locally if you park the car under the sun most of the time. Learn More
-
Nardi Classico Steering Wheel 340MM Black Perforated Leather With Black Spokes
Regular Price: $354.41
Special Price $340.23
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Odula Racing Canards
$324.99Product made by Odula for the MX-5 NC-2 (09-12). Their racing canards are made to flow well with the lines of the vehicle and add downforce & stability. They actually are made for their original bumper, but fit 95% correctly on NC2. Learn More
-
Carbing Radiator Cap
Regular Price: $49.99
Special Price $44.99
High pressure radiator cap made by Carbing for all years MX-5 Miatas. It raises the boiling point of the cooling liquid to improve the cooling efficiency. Learn More
-
Ken Auto Door Bushings (Cups)
$69.99Original door bushing (dove tail/cups) designed by KenAuto in Japan. This is the thickest possible size and most effective door bushing on the market used by thousands on Japanese Roadsters in the circuit. This piece is a replacement for the stock part that the door sits on when closed. By replacing the brittle stock unit, you’ll notice more steering response and less suspension wiggle. This piece will do a great job of stiffening up your Miata. Installs in minutes and creates a noticeable difference in drivability. Some of the JDM shops such as Joyfast & TUCKIN99 had very high praise for the part and use them on all their race cars now! Learn More
-
TUCKIN99 Type-RS Racing Seats
$699.99Bucket Racing Seats made by TUCKIN’99 for all generations of Miata (NA, NB, NC & ND). It’s a Roadster-specific seat, so there’s absolutely no problem in clearance from this seat and no interference. This full bucket seat has a ton of holding power, and TUCKIN99 feels it also is comfortable as a street seat as well. The seat is capable of a low position, including the capability to remove some of the padding on the bottom to drop the seating position even more. The seat is compatible with TUCKIN99 rails as well as some Bride and Recaro model side mount rails. The seat also has a nylon accent on the side to protect the fabric when entering and exiting the vehicle. Learn More
-
Rallybacker Rear Fender Flares
$449.99The Rally Backer Rear Fender Flares for NC (2006-2014) Miata will give an extra 30mm clearance per side of the vehicle to run bigger tires and/or wider + lower offset wheels. It’s a very unique look that will sure improve the look of NC running wide wheels. Learn More
-
Koyo Red Radiator Cap
$49.99Radiator Cap made by Koyo in Japan for the NA, NB, NC & ND MX-5. It adds a nice red touch to the engine bay. Learn More
-
Rallybacker Rear Spoiler
Regular Price: $499.99
Special Price $414.99
Rear wing with a European look made by Rallybacker of Japan. It’s a new and very clean design made especially for the NC (2006-2014) MX-5. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Odula Seat Belt Canceller
$74.99Seat belt canceler produced by Odula of Japan. This piece is useful during circuit driving to turn off the fasten seat belt light while using a racing harness. Learn More
-
Odula Short Stabilizer Links
$174.99High quality sway bar end links Made by Odula of Japan. These can be used to alter the angle of the links and stabilizer bars. Great for lowered cars! Learn More
-
Odula Racing Cams
$1,199.99Brand new racing camshafts made by Odula for the NC (2006-2014) Miata. When used together with a tune and exhaust manifold, horsepower figures of over 200 are possible. Springs and retainers are not included, please use the genuine (OEM) ones. After installation, shims need to be adjusted by selecting proper OEM shims (size vary depending on vehicle difference). Learn More
-
HKS Radiator Cap
$59.99Radiator Cap made by HKS specifically Mazda's Roadster. It’s a 1.1kgf/cm2 so it’s very safe to run on OEM radiator and hoses. Learn More
-
Autowear Seat Covers
$399.99Top quality seat covers made by Autowear for the 2006 to 2015 NC Miata MX-5 to refresh the interior of the vehicle while giving it more class compared to the OEM style. Design using CAD and processed by machine so that uniformity is guaranteed between seats. At resale, car can be put back to stock and seats will look brand new. Learn More
-
JoyFast NDS Shift Knob
$99.99JoyFast released this new model of shift knob that is Roadster-specific to work with all generations Miata (NA, NB, NC & ND)! It offers great grip overall and it’s very easy to manulate. Learn More
-
Jupiter Blue Side Mirrors
Regular Price: $104.99
Special Price $99.99
Blue side mirror lens kit for the NA, NB & NC Miata made by Jupiter. These lenses install over your stock mirrors and are fantastic for driving at night by reducing glare. Additionally during driving in daylight your vision stays about the same! Learn More
-
Odula Titanium Exhaust Wrap
$124.99-Useful for wrapping a manifold or cat-back system -Keep your exhaust gasses at a higher temperature -Great for racing Learn More
-
Integral Kobe N-Zero Spec Exhaust
$829.99Due to the popularity of NA & NB N1 Spec Mufflers, Jet’s released the NC (2006-2015) version. It’s made to give a high pitch sound to the MZR engine during heavy acceleration. The look of this exhaust is superb with the single tip and angled muffler, it’ll sure turn heads. Learn More
-
Acre Super Fighter Brake Pads
$129.99Super fighter brake pad made by Acre of Japan for ALL YEARS Miatas. This brake pad was designed with the street user in mind. The super fighter is usable from the get go, without a warm up needed. Acre designed this pad to offer the driver a pad superior to the OEM suited for street use and winding road/canyon road usage. Learn More
-
Acre Light Sports Brake Pads
$119.99Light sports brake pad made by Acre for the NA, NB, NC & ND Miata. This pad is a step up from their Super fighter line, offering an even more aggressive pad. Similar to the Super fighter, the Light sports is great for the street, usable without a warm up. This pad is designed to offer the driver a high degree of control over the vehicle in all weather and road conditions, a great all around brake pad. Learn More
-
Autoexe Ram Air Intake Kit
$1,049.99Gorgeous ram air system for the NC1/NC2 (2006-2012) Miata by Mazda tuner Autoexe. This kit is made of real carbon fiber and relocates the intake duct into the grill in the foot bumper. This creates a true ram air effect for added horsepower and torque. With a tune to complement the system, even greater gains can be realized. Learn More
-
Integral Kobe Beat Sound Muffler
$1,099.99Sports muffler made by Jet’s of Japan for the NC Miata. This exhaust utilizes a twin loop design and a single tip to create a pleasant exhaust with the signature exhaust note and pitch that Jet’s is known for. A great looking exhaust with a great exhaust note! Learn More
-
ARC Type-A Radiator Cap
Regular Price: $74.99
Special Price $59.99
Rare radiator Cap made by ARC in Japan for the NA, NB, NC & ND MX-5 (as well as other vehicle models). It adds a nice classy touch to the engine bay. This is a re-run which means we've asked ARC to re-make a discontinued product for REV9 Autosport. Once the 50 radiator caps are gone, there will be no more of them. Please check the back of your radiator cap before ordering. We are selling the Type-A (as pictured on the graphic). If yours is Type-B, we do not offer it. Learn More
-
Acre Formula 700C Brake Pads
$174.99Formula 700C brake pad made by Acre of Japan for the Mazda Miata (All Years). This pad is appropriately named 700C, for its ability to thrive at rotor temperatures around 700 degrees celsius. This pad is a circuit use pad that will also work on the street. Note that this braking compound is designed to be more gentle on rotors than other carbon metallic compounds, but will require delicate footwork when braking at the limit. Learn More
-
Acre Formula 800C Brake Pad
$249.99Circuit use brake pad for the Mazda Miata (NA, NB, NC & ND), Formula 800C made by Acre. Similar to the 700C model, this is an aggressive street and circuit use brake pad. This version is rated to operate at rotor temperatures of standing to 800 degrees celsius. This pad is designed to retain a high braking force through a wide temperature range and also not be terribly harsh on rotors. The 800C model is designed for medium/heavy weight vehicles such as the GT-R or Evolution models but will also complement the footwork of a light weight vehicle such as the Miata! Learn More
-
ZOOM Type-2 Shift Knob
$104.99Round shift knob with bottom neck made for the Mazda Miata (all years). It has the same size as Ferrari Shift Knob (42.5mm diameter and height of 49.5mm) and is available in many different finishes (anodized). Made of aluminum and weights about 100g. Polished version is discontinued and no longer available. Learn More
-
Nopro 78°C Thermostat
$129.99High performance thermostat by Nopro of Japan for 2006-2015 NC MX-5. This thermostat replaces the stock unit and is able to keep water temperature below 90° Celsius under hard driving, even with the stock radiator. Typical operating temperatures with this thermostat should remain between 80° and 85° Celsius. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
ZOOM Monaco 240 Rear View Mirror
$264.99The Monaco 240 rear view (room) mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 240mm wide, 80mm vertical and 96mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle. Please note that the shape is made for Right Hand Drive but can also be used on Left Hand Drive, however, you might see a part of your body in the mirror view. Learn More
-
Carbing 0.6L Oil Catch Can
$274.99Oil Catch Can by Carbing of Japan. It will fit NA, NB & NC Miatas (1989-2015) Similar to other oil catch cans, these are fantastic for trapping contaminants that would normally recirculate through the air intake such as oil, sludge or carbon. Carbing’s personal touch to the catch can would be their level monitor, on one side of the can. This will allow you to see the exact level of contaminants in the can, great for easy maintenance. This is a universal kit, designed to work for a wide variety of applications. To this end, different hose diameters and cans are available. Learn More
-
ZOOM Oval Aero Rear View Mirror
$199.99The Oval Aero Rear View (room) mirror made by ZOOM Engineering will fit NA (89-97), NB (98-05), NC (06-15) & ND (2016+) Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 205mm wide, 62mm vertical and 60mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle using a slightly tinted blue mirror. Learn More
-
Works Bell Rapfix II Quick Release
$374.99Genuine Steering Wheel Mounting QR Lock System made by Works Bell of Japan! It is built to be 100% compatible with their Short Boss Hub Kit, but will also work with Daikei Boss Hub Kit! This is an evolution of their original RAPFIX system, employing the use of lighter weight materials and an even easier to use mounting system. While the release mechanism has stayed largely the same, Works bell has made a new wheel attachment process: Previously you had to press the safety button, draw back the center slip, and then insert the wheel and lock it in place. NOW it’s as easy as placing the wheel on the hub! The new system self locks in place. Additionally, the RAPFIX II has a special mounting layout, so that it makes it easier to attach the wheel at center. The slip material is also teflon coated that not only helps to protect the finish, but also to make the engagement with the wheel and hub buttery smooth, time after time again. Learn More
-
Nielex License Plate Relocator
$144.99Beautiful license plate holder kit made by Nielex of Japan for NC1 and NC2/NC3 MX-5. This kit is of impeccable quality, typical of Nielex. Made of stainless steel and brass, this kit will relocate your front number plate to the side and about 50mm lower. Further, the bracket has a slight curve to it that matches the lines of the Miata. Learn More
-
Zeromotive Aeroguard II
$64.99Body part guard made by Silk Blaze & Zeromotive of Japan. This part is a MUST have for those with extremely low vehicles, or for those with low-hanging aero parts. With a very low car, even small changes in elevation can cause you scrape the front, rear, or even the side skirts of your car. The aeroguard material attaches below the aero parts using durable 3M double sided tape and will provide a soft cushion and protect the finish of your cars body components. 1 roll is 29mm x 4mm x 3m The aeroguard material attaches extremely easily; simply clean the part you wish to attach it to, peel back the adhesive cover and apply! If you wish to wrap the material around a corner, simply cut little triangles into the material for a smooth, even angle. Learn More
-
Acre Brakes PC2600 Racing Brake Pads
$274.99The PC2600 brake pad is a variety that they originally made for Porsches, to work well with their rear engined drive layout. Acre have now adapted them to work with a wide variety of vehicles (including the Mazda Miata)! The PC2600 is an all around pad, what Acre has described as a semi-racing pad. Acre states this pad is suitable for street, touge, circuit and even endurance racing. This pad has been used in light endurance events of 2 hours and all the way up to 12 hour endurance events in super taikyu racing. Acre says this pad produces more dust than some of their less aggressive pads and also is a little less gentle on rotors. Compared to Acre’s similar PC3200 pad, the PC2600 is more resistant to fade but less gentle on rotors. Learn More
-
Acre Brakes PC3200 Brake Pads
$299.99The PC3200 is one of Acre Brakes semi-racing brake pads, appropriate for competition and street use for all years Mazda Miata applications. Acre has tested these compounds on the track and even in endurance racing events such as Super Taikyu! On top of that the pad is gentle enough that you can also use it for aggressive street use. Note that this pad will produce some dust, but all in all should be more gentle on rotors than the PC2600 model pad. Learn More
-
Acre Racing Pro Brake Pads
$259.99Racing use brake pads from Acre Brakes. This pad is designed specifically for competition use only. Acre recommends this pad for short endurance events or track days. Users in Japan have had great success in racing series with this pad; those racing Silvias, and Miatas in particular! This pad will pair up nicely with sport tires or racing slicks; as well as beginners or advanced users. Acre designed this pad to offer the driver an immense amount of control over braking force and go the distance in a sprint race or short endurance event. Learn More
-
Jet Stream Gran Turismo Over Fenders
Regular Price: $1,599.99
Special Price $1,399.99
The Jet Stream Gran Turismo Overfenders are made specially for the NC3 (2013 to 2015) MX-5. It will make the car 15mm wider per side and allows running lower offset wheels on the car. The shown vehicle is running 17x9.5 +35 in front and 17x9.5 +28 in the back combined with 245-40R17 tires and sees a lot of track duty. It's mainly used to be legal (so tires and wheels don't stick out from the arches) and make the car look much more aggressive. Drilling is required inside the flares. The holes cannot been seen from the outside. Learn More
-
Autoexe NC05 Front Lip
$674.99Front Spoiler made by Autoexe for 2009 to 2015 NC (NC2 & NC3) MX-5s. This front lip is part of their NC05 design which is greatly inspired by lightweight sport cars and simple design that flows well with the latest NC lines. It comes in piano black (painted) finish so that it'll look great on any body color. Learn More
-
Autoexe NC05 Rear Spoiler
Regular Price: $499.99
Special Price $449.99
Spoiler made by Autoexe for a soft top and power retractable hard top (PRHT) version of the NC (2006-2015) MX-5. These are part of their NC05 design which is aimed at having a lightweight sports car look and subtle appearance. The spoiler comes unpainted. Please note that the PRHT spoiler comes with Autoexe sticker, but the soft top does NOT come with the Autoexe chrome emblem (sold separately). Learn More
-
Jun Auto Lightweight Flywheel
$574.99Light weight flywheel made by JunAuto for the NA, NB & NC MX-5 Miata (1989 to 2015). These are almost 50% lighter than OEM and will make the engine rev much faster (better engine response) than OEM due to reduced rotational mass. It's a great add-on that anyone who enjoys spirited driving will love. It is made by turning and shaving forged material to have a very strong part. Please scroll down for OEM versus Jun Auto flywheel weight. Learn More
-
Jet Stream 01 Front Lip
$349.99Front lip spoiler made by Jet Stream for the NC3 MX-5 (2013-2015). It flows well with the lines of the car and it's a nice and inexpensive option to add some style to the front end of the car (and make it look lower as well). If you want a more aggressive version, check out the Jet Stream Front Lip & Diffuser!
Please note that the pictured lip is wrapped in Carbon Fiber sheet, the one we ship is made of FRP. Learn More
-
Integral Kobe Master Spec NC3 Front Lip
$624.99Front Spoiler (Air Dam) made by Jet’s (Integral Kobe) for 2013-2015 years NC3 MX-5 that is made with their special 3D wing shape. The 3D wing shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More
-
Garage Vary Glide Front Spoiler
$799.99Front Lip Spoiler made by Garage Vary made to improve aerodynamics of the NC1 to the maximum. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Garage Vary Glide Air Dam
$749.99Front Lip made by Garage Vary to improve aerodynamics of the NC2 at the best possibe level. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Odula Cooling Hood
$1,974.99Stylish bonnet made by Odula of Japan for NC Miatas (2006-2015). This bonnet is able to cool the engine bay as well as keep water out of the engine compartment.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Odula Ram Intake RS
$299.99Ram air intake kit for NC MX-5 (2006-2015) made by Odula. By forcing air to the intake, the intake is able to make more power and increase throttle response. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Acre Dustless Real Brake Pads
$199.99Acre’s customers asked for a pad that offered potent stopping power, but with little to no dust and no squeal. This pad is their answer to that request! With the development of this pad, Acre sought to break the stereotype that a dustless, quiet brake pad was inferior in stopping power. Now, you can have a pad with better than OEM stopping power, with none of the dust or noise! Acre comments that worst case scenario on a cold winter day, you may hear some squealing during the first stop, but thats it. Learn More
-
Acre N-Zero Brake Pads
$199.99Circuit use brake pad by Acre Brakes of Japan. Acre designed this pad specifically for N-Zero one-make races that are gaining popularity in Japan. And one the competing models just so happens to be the Miata! The N-Zero series involves models with similar specs, and also one that must pass the rigorous “Shaken” vehicle inspection. Although this is a pad designed for competition use, it can be used on the street as well. Learn More
-
326POWER License Plate Spike Bolts & Washers
$124.99Very extreme looking license plate bolts using the legendary 326POWER spike design that made their Lug Nuts and Valve Stem Caps very popular. It’s a universal product and will fit all type of vehicles. Learn More
-
REV9 NC1/NC2/NC3 Black Chrome Emblems
$214.99Three emblems set for the NC MX-5 (2006-2015). Front/Rear Mazda Sings & Roadster Sign (from the NC or ND MX-5) that have a special Black Chrome finish, made especially for REV9 Autosport. This is a very subtle change that will not make your car look cheap. Picture shows the ND "Roadster" emblem.
We recommend choosing "ND (New) Version" badge as the "NC Version" becomes hard to read due to its shape. We will not accept any returns related to "NC Version" emblem if choosen.
Learn More
-
Integral Kobe NC3 Front Canards
$219.993D design front canards for the NC3 (2013-2015) MX-5 designed by Jet's Integral Kobe to provide extra downforce during circuit racing. They improve performance during cornering and give more stability to the car at high speed. Learn More
-
Odula Carbon Ram Air Box
$774.99Carbon Fiber Intake (Racing Ram Air Box) made for the NC MX-5 Miata (2006-2015) by Odula in Japan. It is made of a mix of Carbon Fiber (for nice looks) and FRP (to keep the cost reasonable) and will provide higher engine response as well as a 3-5hp power up on stock vehicles. Learn More
-
Rosso Modello Corsa Ti-C Exhaust
$974.99Muffler system from Rosso Modello of Japan for the NC (2006-2015) Miata. This offering from Rosso model has rolled dual tips that come in a wide variety of colors. The dual canisters give the Miata an aggressive appearance and a sporty exhaust note along with it. Please note that NC1 (2006-2008) MX-5 might require some cutting of the bumper exhaust holes due to clearance of tips. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Nardi Deep Corn 350MM Italian Cross Stitching Special Edition
Regular Price: $347.87
Special Price $330.82
Special Edition (Italy Flag Stitching Color) Nardi Deep Corn Steering Wheel. 350MM size, black perforated leather with black anodized spokes & red, white & green stitching (triple stitching). Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Car Make Corn's Leather & Mesh Racing Seat
$984.99Beautiful black synthetic leather racing seats with mesh center made by legendary tuner Car Make Corn's. Replace your OEM seat for a more aggressive version that will keep you in place when taking a sharp turn. It sits about 20mm lower than OEM seats.
Learn More
-
Roadster (NC) JDM Badge
$44.99Original "Roadster" emblem from JDM (Japan-spec) 2006-2015 NC Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. Learn More
-
Liberal Console Lid Cover
$99.99Product from JAPAN made by LIBERAL that adds a nice luxury feel to the NC2/NC3 (2009-2015) MX-5 console lid cover. Subtle and stylish touch to the interior. LIBERAL products are considered as the best synthetic leather products available in Japan for NC Roadsters. Liberal Products are currently under heavy production load and delays are 3-4 months currently. Learn More
-
Garage Vary Type-S Ducktail Spoiler
$599.99Rear spoiler made by Garage Vary for the non-PRHT NC MX-5 Miatas (2006-2015). It’s made of 3 pieces so the trunk weight is not affected so much and provides a nice, wide and aggressive look to the back of the vehicle. Please note that the picture shows GT Wing mounts on the trunk, these are not included. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary NC3 Front Spoiler
$549.99Front lip made by Garage Vary for the NC3 (2013-2015) MX-5 Miata to improve looks and make the bumper look lower. It flows very well with the lines of the vehicle and gives a nice and bold front look. It’s also available with an optional front splitter. Learn More
-
Garage Vary NC3 Front Canards
$174.99Front Bumper Canards made by Garage Vary from high quality FRP or Carbon Fiber for the NC3 (20012-2015) MX-5 Miata. It’ll help improve downforce on the front of the vehicle and improve cornering speed during circuit racing. Learn More
-
NOPRO GT Spec Hardtop
$1,549.99Removable hard top for the NC (2006-2015) Miata from NOPROof Japan. This FRP hardtop features a racy look that has much more of a fastback appearance than the factory hardtop. It also is equipped with canards on the rear of the roof for a sharp look. Ships with black gel coat ready for paint! This hard top does NOT include the rear glass, any of the weather stripping, or latches/brackets. NOPRO reports that the rear glass can be sourced from an NB soft top and the weather stripping is the same as the OEM NC hardtop. Please note that the price is for the FRP version. The Dry Carbon Fiber version is not available anymore.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
REV9 License Plate Frame
Regular Price: $14.99
Special Price $9.99
Classy and elegant License Plate Frame made of plastic with embossed “REV9” logo (white & red). Shows your support to the high quality JDM community and we will be more than honored to be shown on your car. It’s made to fit USA & Canada license plates size, international is not confirmed yet. Learn More
-
Nakamae Original Shift Boot
$119.99Shift boot made in JAPAN by NAKAMAE for the 2006-2015 NC MX5. Modern leather replacement for your tired or worn out shift boot. Nakamae parts are known for their perfect fitting as well as color matching interior and retro interior styling. Nakamae item #1007. Learn More
Out of stock
-
Nakamae Handbrake Boot
$119.99E-Brake boot made in JAPAN by NAKAMAE for the 2006 to 2015 NC MX5. Modern leather replacement for your tired or worn out handbrake boot. Nakamae parts are known for their perfect fitting as well as color matching interior and retro interior styling. Nakamae item #1006. Learn More
Out of stock
-
Nakamae Door Grip Cover
$129.99Nakamae door grip covers designed for NC (2006-2015) MX-5s. Enhance your OEM door panel with these high quality and color-matching leather door grip covers. The feeling to the touch is really nice and you will definitely enjoy having such item in your car every time you close your door. Please note that the pictures are either showing NC1, NC2 or NC3 version. Nakamae item #1059 / #1173. Learn More
Out of stock
-
Car Make Corn's Red Leather Racing Seat
$984.99Awesome red synthetic leather racing seats made by Car Make Corn's. It matches the 1993LE (R-Limited) color very closely and has a very classy look. Available with regular stripes (no more "V" stripes), it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
TK Style Carbon Fiber Front Diffusers
$274.99Add some aggressiveness to the front end of your NC2 (2009-2012) MX-5 Miata with these carbon fiber front diffusers made by TK Style. They will give the car a similar look to the newer (2016+) ND MX-5 front end and will not reduce the front clearance by much. Please note that the Carbon Fiber finish is not UV coated and it is recommended to have it coated locally if you park the car under the sun most of the time. Learn More
-
Zeromotive Seat Reupholstery Kit
$699.99Seat upholstery kit made by Zeromotive of Japan for the NC (2006-2015) MX-5 Miata. Unhappy with your stock upholstery or just want a change of scenery? This is the perfect kit for you! Zeromotive offers a huge degree of customization options so that you can create the interior for your Miata that you always wanted! From basic single color seats to wild two tone patterns, just about anything is possible! Learn More
-
Autoexe Sports Induction Box
$289.99Induction box made by Autoexe for the 2006 to 2015 NC MX-5 Miata. This item is made to catch air from the front of the car and with number one purpose of giving a better feeling of the engine to the driver. It'll give a nice sound every time you get the car in full throttle position. 2025 UPDATE : The version with K&N air filter has been discontinued and no longer available. You can re-use your OEM air filter or put a performance (stock airbox) replacement air filter. Learn More
-
Autoexe Premier Tail Muffler
$1,199.99Muffler made by Autoexe of Japan for the NC (2006-2015) MX5. The dual canisters give the Miata an aggressive appearance and a sporty exhaust note along with it. Learn More
-
Autoexe Strut Tower Bar
$374.99Solid steel strut bar for the NC Miata from Autoexe. This strut bar replaces the OEM bracing with a 3-point oval bar that will greatly increase body stiffness. Crafted as one solid piece for the stiffest connection possible, installs easily us-ing hand tools. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
AutoExe Tie Rod Ends
Regular Price: $299.99
Special Price $249.99
The tie rod ends that ship from the factory on the 2006 to 2015 NC Miata are designed for the stock ride height of the vehicle. Once you lower your car, the angle of the tie rod changes and can adversely affect handling agility, it can even result in bump steer. This special tie rod end kit replaces the stock tie rod ends with those made from durable carbon steel. Further it also has a special ball joint with a longer stud on it designed for exclusive use with lowered cars. Learn More
-
Autoexe Floor Cross Bar
Regular Price: $299.99
Special Price $227.99
Rear suspension cross bar from Autoexe of Japan for the NC (2006-2015) MX-5 Miata. This bar connects the upper mounts of the rear suspension together to increase body stiffness and enhance handling. For maximum effect Autoexe recommends partnering this bar with their front strut tower bar. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Autoexe Sports Sway Bar
Regular Price: $399.99
Special Price $277.99
Sports stabilizer bar from Autoexe for the NC (2006-2015) Miata. These swap bars replace the skinny OEM bars with thicker parts that will reduce body lean and roll during cornering. As a result of this, the tires will be able to keep more contact with the road, improving handling. Both bars have a choice of mounting points that allow for varying degrees of stiffness depending on your desired stiffness. Learn More
-
ZOOM TS Rear View Mirror
$234.99The TS rear view mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 245mm wide by 58mm vertical. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle. Learn More
-
Nielex Short Shift Kit
$349.99The Pro-Spec Joystick is one of Nielex’s very famous part for the Roadster. This is the NC (2006-2015) version that is only compatible with the 5 speed transmission. This product is aimed to improve the shift feeling and make the vehicle more enjoyable to drive. The height of the shift knob can be moved by plus or minus 15mm versus stock. Learn More
-
Zeromotive Meter Button Covers
$54.99Gauge cluster button (trip reset or interior illumination) cover made for the 2006 to 2015 NC MX-5 Miata. It is made of SUS304 Stainless Steel with 2 possible finishes. It’ll put a great and classic look to your gauge faces area and looks awesome combined with the Zeromotive Gauge Panel & Zeromotive Needle Caps.
Learn More
-
REAL Japan All Wood Shift Knob
$129.99The Real All Wood line of shift knob consist in a similar shape shift knob as the OEM ND (2016+) MX-5 Miata one made with a lacquer of natural wood with 12 layers of clear coat. It gives the interior a very classy look and will fit perfectly with their All Wood Steering Wheel.
Piano Black with Red Stripe has been discontinued and no longer available. Please refer to photos of shift knob alone. Learn More
-
REAL Japan Stainless Shift Knob
$139.99Stainless Steel Shift Knob made by REAL Japan for the 2016+ ND MX-5 (6 speed manual). It has a nice polished finish and it has a 48mm diameter. It sits higher than the OEM shift knob and gives a nice, luxury look to the interior. Learn More
-
Autoexe Street Sports Brake Pads
Regular Price: $174.99
Special Price $144.99
-Predictable -Low amount of dust -Great power -Only available for NC (2008-2015) MX5 Miatas Learn More
-
Autoexe Sports Brake Line
Regular Price: $374.99
Special Price $324.99
Brake lines (set of 4) made by Autoexe of Japan for the 2006-2015 ND Miata. Autoexe uses a combination of stainless steel mesh and teflon lines to give your Miata a more direct pedal feel and a confidence inspiring braking sensation. Under heavy braking the OEM rubber hoses can expand, leading to a somewhat spongy pedal feel, these sturdier lines combat this. Learn More
-
Autoexe Sports Clutch Line
Regular Price: $129.99
Special Price $87.99
Stainless steel mesh Teflon/PTFE Clutch Line made by Autoexe for the NC (2006-2015) MX-5 Miata. During racing, factory rubber clutch line may expand because of oil pressure and degrade over time. The feeling of the Autoexe Clutch Line is more direct and it’s made to last for the life of the vehicle because of its PVC coating. Learn More
-
Autoexe Sports Flywheel
Regular Price: $499.99
Special Price $377.99
Light weight flywheel kit made by Autoexe of Japan for the 2006 to 2015 NC MX5. This light weight flywheel will help your NC Miata’s throttle response by reducing the weight of the flywheel by over 2kg! Autoexe uses Chrome molybdenum to make a very strong yet light weight flywheel. This flywheel also lowers the moment of inertia by about 24% and should also help your Miata feel more powerful. Learn More
-
Autoexe Short Sway Bar Links
Regular Price: $249.99
Special Price $174.99
Adjustable stabilizer link by Autoexe for NC (2006-2015) Mazda Miata/MX-5. These links connect the left and right suspension arms to the stabilizer and controls the body roll of the car. With the conventional, fixed links, they are set up to sit parallel to the ground when the car is still. During situations such as hard cornering and in rough roads when the suspension is really getting put to work, the fixed links are pushed up and down into very aggressive angles and can no longer function properly. With the adjustable links, the links can compress and expand to match the movement of the suspension components and allow the stabilizer to do what they were designed to do. A must have for those serious about the track and want a more planted, stable feel during their laps. Learn More
-
Autoexe Member Brace Set
Regular Price: $1,074.99
Special Price $987.99
The Autoexe Member Brace Set (Underchassis Bracing) is made specially for the 2006 to 2015 NC MX-5 and aimed to comply with its particulary low ground clearance. It is made of steel to ensure its durability and rigidity. The member brace set connects at multiple areas on the floor of the vehicle to connect it together and make the car stiffer than ever. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
ZOOM Penta 190 Rear View Mirror
$239.99The Penta (Pentagonal) rear view mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 190mm wide by 65mm vertical. It offers a wider view than OEM mirror even tough it's smaller. Its blue tinted window also will help reduce glare from cars behind your vehicle. Learn More
-
ZOOM Compact Retro Rear View Mirror
$224.99Classic & Retro Rear View Mirror from ZOOM Engineering that will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It is available in S and M sizes. It offers a wider view than OEM mirror even tough it's smaller (M version only). Its blue tinted window also will help reduce glare from cars behind your vehicle. Learn More
-
Rallybacker Side Skirts
Regular Price: $699.99
Special Price $549.99
Side steps made by Rallybacker for the 2006 to 2015 NC MX-5 Miata. Very classy change to the side of the vehicle. Makes it look lower and flows really well with the lines of the car. Learn More
-
Garage Vary Third Brake Light Cover
$254.99This item is made by Garage Vary for the NC (2006-2015) MX-5 to replace the third brake light with a cover that’s giving the vehicle a similar shape to the NA & NB Miatas. It’s available in both FRP and Carbon Fiber. The product is shown between yellow square on image. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Nielex M2-Type Oil Cap
$114.99Classic looking oil filler cap made by Nielex for your NC (2006-2015) or ND (2016+) Miata. This oil cap is made to the similar specs as the one we could find in the past in the M2-1002 vehicles. It has a beautiful polished top and very detailed side grip pieces. It's an artsy piece for those who pay attention to detail of their engine bay! Learn More
-
326POWER 40mm Lug Nuts
$234.99Product from 326 POWER to add some style to your deep dish or concave wheels. Version “Short” is 4 cm, available with six-sided logo, these lug nuts will be noticed by every enthusiast! This is the new 2017 model, the previous model was discontinued. Please note that Bronze color is now discontinued. Learn More
-
326POWER 60mm Lug Nuts
$264.99Product from 326 POWER to add some style to your deep dish or concave wheels. Version “Medium” is 6 cm (2 cm longer than the Short version), available with six-sided logo, these lug nuts will be noticed by every enthusiast! Please note that Bronze color is now discontinued. Learn More
-
326POWER 80mm Lug Nuts
$299.99Product from 326 POWER to add some style to your deep dish or concave wheels. Version “Long” is 8 cm (4 cm longer than the Short version), available with six-sided logo, these lug nuts will be noticed by every enthusiast! They are the longest lug nuts available on the market! This is the new 2017 model, the previous model was discontinued. Please note that Bronze color is now discontinued. Learn More
-
Beatrush Super Oil Filter
Regular Price: $44.99
Special Price $39.99
The Beatrush Oil Filter is made to ensure your high performance engine (1.5L, 1.6L, 1.8L or 2.0L from NA, NB, NC or ND Miatas) will withstand daily and racing abuse. It has good flow rate, efficient filtration, low resistance and it's light weight + compact on top of that. Learn More
-
Project Kics Leggdura RL53 (Open) 2 Pieces Lug Nuts
$224.99Open-type lug nuts made in Japan by top quality maker Project Kics. They are made of two pieces (inner and outer lug nut) and comes with 1 lock nut per every wheel. It is one of the hardest type of lug nut to steal. The 2 pieces design is also very nice as it's removable by hand using a tool, so that you can remove them before bringing them to the shop (to keep them intact). The shell (outer piece) is made of Aluminum and the lug nut itself is made of Duraluminum (forged aluminum) which is the most commonly used material in racing vehicles due to its durability and lightness. Learn More
-
Project Kics Leggdura CL53 (Closed) Shell Type Lug Nuts
$214.99Closed end lug nuts made in Japan by Project KICS. They are shell-type (2 pieces: inner and outer lug nut) and comes with 1 lock nut per every wheel. It is one of the hardest type of lug nut to steal. The 2 pieces design is also very nice as it's removable by hand using a tool, so that you can remove them before bringing them to the shop (to keep them intact). The shell (outer piece) is made of Aluminum and the lug nut itself is made of Duraluminum (forged aluminum) which is the most commonly used material in racing vehicles due to its durability and lightness. Learn More
-
Nardi Competition Steering Wheel 330MM Black Perforated Leather With White Spokes
Regular Price: $301.15
Special Price $289.99
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nielex Front Strut Bar Version 2
$674.99The Nielex Excellent Tower Bar for NC (2006-2015) has been around for a while and they just released their Version-II. Back when they released the Version1, the angles for cutting the mounting points in stainless steel couldn’t be obtained in 3D (too difficult), but now it’s totally possible. The Version2 now has exceptional rigidity and does not have any bending making it extremely rigid. The stainless steel material also gives it a very exotic/luxury look. The 8-point tower bar reinforces 8 different points and improves torsional rigidity vertically and horizontally. Its trapezoidal form also provides maximum support to the sides and prevents twisting and displacement in the engine bay. Lightweight and easy to bolt on, it can be installed in an hour with no drilling required!Please note that fitting this to a NC2 or NC3 will require removal of sound enhancer tube. Learn More
-
Cusco Street Zero Coilovers
Regular Price: $1,374.99
Special Price $1,271.87
Coilover suspension system made by Cusco of Japan for the 2006-2015 NC Miata. This kit is designed as more of an entry level kit, featuring a fixed damper strength with adjustable height. A kit such as this is great for those who daily drive their car, want a perfect ride height and don’t plan on racing too much. Please note that even though the picture (generic) shows upper mounts, this suspension reuses OEM upper mounts and the Cusco Blue upper mounts are not included. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Odula License Plate Relocator (NC2 & NC3)
$109.99Front License Plate Holder (Relocation Kit) made by Odula exclusively for the NC2 (2009-2012) and NC3 (2013-2015) MX-5 Miata. It installs using OEM Bumper Mounts and sits sideways in order to provide the radiator with more fresh air. Please note that depending on your country, it may be needed to drill 1 or 2 holes into the holder due to different sizes from Japan. Learn More
-
ATC Premium Italia Suede Steering Wheel
$329.99ATC Steering Wheels are back! The Premium Italia Suede Steering Wheel is a limited edition that uses suede from Italy and re-use their award winning shape (Flat 325R, Deep 330 & Flat 325) of steering wheel. The steering wheels are made in Japan and made of the best quality. You need to have an aftermarket steering wheel boss hub kit to use this steering wheel in your car. Please note that the Flat 325R has leather grips (black perforated leather) and the coloured part is suede. Learn More
-
ATC Sprint DriftOne$ Steering Wheel
$349.99The ATC Sprint Drift One $ is a special edition steering wheel dedicated for the D1 Championship (drifting) that's available in 325mm & 345mm. It’s made to provide with a great grip and be enjoyable while doing motorsport. The steering wheels are made in Japan and made of the best quality. You need to have an aftermarket steering wheel boss hub kit to use this steering wheel in your car. Learn More
-
Rallybacker PRHT Ducktail Spoiler
Regular Price: $549.99
Special Price $414.99
Duckbill spoiler made by Rallybacker for the NC1 (2006-2008), NC2 (2009-2012) and NC3 (2013-2015) MX5 with PRHT. This will look good on stock bodied vehicles as well as widebody ones. The spoiler follows the lines of the vehicle. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Low Trunk Lip
$249.99Rear lip spoiler for the trunk made by Garage Vary. Want a nice subtle change to the rear of your car? It looks nice and sleek. Before painting, please make sure the product fits the car properly. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Gauge Pods
$174.99Gauge (meters) holder made by Garage Vary to fit 52mm diameter gauges on the NC (06-15) dashboard. This will keep the important information from the meter in a spot that's easy to monitor during driving and racing. Please note that no meter is included. Learn More
-
Odula Rear Diffuser
$849.99The Odula Rear Bumper Diffuser is made for the NC (2006-2015) MX-5 Miata. Made of FRP or Carbon Fiber, it’ll improve the aerodynamics of the vehicle while giving it a nicer, more aggressive look! Please note that the NC1 Rear Diffuser has 2 fins and the NC2/NC3 has 4 fins. Learn More
-
Odula Reinforced Engine Mounts
$314.99Harder motor mounts made by Odula for the NC (2006-2016) MX-5 Miata to provide the driver with a better feeling of the car while racing and a more precise shifting. It’ll suppress the movement of the engine under acceleration and deceleration. Learn More
-
Daikei Sports Timer Horn Button
$74.99Looking for a cool timer for your race car? Look no further, the Daikei Sports Timer Horn Button will please you and help you get a close idea of what your lap times are! The timer has 2 buttons, so it’s very easy to use and looks pretty cool at the same time! Learn More
-
Car Make Corn’s Round Shift Knob
$104.99Circular shift knob made by Car Make Corn’s that’s made for 5-speed Miatas (NA, NB & NC). It feels great in hand, it’s light and it looks pretty good (especially with the included bottom ring). Learn More
-
Autoexe Round Shift Knob (Automatic Transmission)
Regular Price: $124.99
Special Price $114.99
Spherical shape shift knob made by AUTOEXE to give the vehicle a nice feel while shifting. It feels great in hand and looks pretty awesome. Black anodized aluminum with Autoexe logo engraved on top of the shifter sure makes it a high quality item. Learn More
-
Enkei Japan PF07 18" Wheel
$349.99The Enkei PF07 is a wheel design that’s aimed to look tough and sporty by being bold looking. The wheel is available in 18x7 up to a very wide 18x10.5. The 18” size in 5x114.3 is suitable for NC Miatas (2006-2015) and comes in aggressive fitments. The NC picture has 18x8.5 +35 with 215/35R18 tires. Price is for 1 wheel that is BRAND NEW. Learn More
-
Trust Side Skirts
$649.99Side skirts made by Trust Power in Japan for the NC1 (2006-2008) and NC2 (2009-2012) MX-5 using high quality FRP. They sit 20mm lower than the OEM counterpart for a more aggressive stance as well as added aerodynamics. The skirts come primed and are paint ready. Learn More
-
DAMD Soft Top Cover
$1,049.99To celebrate the NC Miata receiving car of the year 2005 - 2006 DAMD set out on a different approach to the look of vehicle. With the Black and Metal series DAMD transforms the Miata into a more elegant car with higher quality looks. This Specific kit from the series is a soft top cover that gives the car a cleaner bodyline as well as a sportier styling. Because this will affect the opening function of the soft top, please remove the cover during any foul weather. Learn More
-
Car Make Corn’s Leather Shift Knob
$114.99Round shape leather shift knob with baseball stitching pattern made by Car Make Corn’s that’s made for ALL YEARS Miatas (NA, NB, NC & ND). It feels great in hand, it’s light and it looks pretty good (especially with the included bottom ring). Learn More
-
Nardi Prestige Perforated Leather Shift Knob
Regular Price: $139.99
Special Price $104.99
Shift Knob made by NARDI that will fit ALL YEARS Miatas. It has perforated leather & red stitching to match the Deep Corn (Or Classico) very nicely! Subtle and stylish touch to the interior. Matches Nardi Steering Wheels & JoyFast Handbrake Handle. Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
Nardi Deep Corn REV9 Special Edition 350MM (White Stitching)
Regular Price: $399.99
Special Price $344.99
Genuine Nardi (Rally) Steering Wheel (350mm) imported from Italy FOR REV9 Autosport that is available in VERY LIMITED QUANTITIES. This is the first batch ever of Nardi Deep Corn with WHITE stitching! Pictures coming soon! Learn More
-
Nardi Deep Corn REV9 Special Edition 330MM (White Stitching)
Regular Price: $399.99
Special Price $344.99
Genuine Nardi (Deep Corn) Steering Wheel (330 mm) imported from Italy FOR REV9 Autosport that is available in VERY LIMITED QUANTITIES. This is the first batch ever of Nardi Deep Corn with WHITE stitching! Pictures coming soon! Learn More
-
Zeromotive Radio Console Trims
$149.99A discreet addition for the NC Mazda Miatas/MX-5 (06-15) interior. Made by Zeromotive in Japan, these side panels are made using high quality SUS 304 with a hair line design. They have perfect fitment. Being just 0.3 mm thin it is doesn’t add unnecessary bulk to the center console and the hair line design gives an added depth that changes based on the angle that it is viewed from. Because it isn't a polished mirror finish it blends nicely into its surroundings giving it a unique look that still seems factory. Learn More
-
Zeromotive AC Dial Panel
$69.99Neat air conditioning buttons surround panel for NC Mazda Miatas/MX-5 (06-15) interior. These AC dial back panels are made using high quality SUS 304 with a hair line design. Being just 0.3 mm thin it is doesn’t add unnecessary bulk to the center console and the hair lines gives an added depth that changes based on the angle that it is viewed from. Learn More
-
Garage Vary Rear Garnish
$139.99Rear Fender/Bumper Garnish for the 2006 to 2015 MX-5 Miata made by Garage Vary. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires. Learn More
-
Garage Vary Ram Air Duct
$199.99Ram air intake (duct) kit for the NC MX-5 (2006-2015) Miata made by Garage Vary. By forcing air to the OEM intake, the intake is able to make more power and increase throttle response. This will fit the OEM front bumper and will be hidden once the bumper is installed. Learn More
-
NOPRO Original 4-1 Header
$1,749.99Original 4-1 type exhaust manifold by NOPRO in Japan. Made specifically for NC (06-15) Mazda Miata/MX-5 with higher output engine swaps such as the L3/L5. Light weight at 5.4 kg, it gives better throttle response during the mid to high rev range, making it an essential part to get the most out of a tuned engine. Made from highly durable stainless steel and technology including spring joints to minimize failure from heavy vibration and heat, you can expect long life even under hard driving conditions. The 4-1 layout with 45mm piping is designed to bring out the full potential of the engine by letting it breath better. The center pipe can be attached to OEM piping along with the catalytic converter so install is very easy with no modifications required. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Zeromotive AC Dial Rings
$169.99Neat air conditioning dial rings for the NC MX-5 (2006-2015) radio console. These AC dial rings are made using high quality SUS 304 with a hair line or polished design. It looks like a factory option and gives a nice, high quality feel to the interior. Learn More
-
Project Kics Leggdura LR Lug Nuts
$114.99Closed end 35mm lug nuts (and optional lock nuts) made in Japan by Project KICS. As usual, they are top quality and will keep your wheels secure in a fashionably way. These are not cheap aluminum lug nuts, those are FORGED aluminum (Duraluminum) and safe to use on the street & track. Learn More
-
Beatrush Shift Knob Type-A
$84.99Shift knob made by Beatrush (LAILE) from a duracon that comes with engraved 5-speed shift pattern. Finish is impeccable and very durable. It measures 40mm wide by 68mm tall. The duracon material is widely used in racing application and is not influenced by heat easily. Learn More
-
Beatrush Type-B Shift Knob
$84.99Circular shaped shift knob made by Beatrush (LAILE) from a duracon that comes with engraved 5-speed shift pattern. Finish is impeccable and very durable. It measures 45mm wide by 61mm tall. The duracon material is widely used in acing application and is not influenced by heat easily. Learn More
-
Beatrush Type-C Shift Knob
$84.99Oval shaped shift knob made by Beatrush (LAILE) from a duracon that comes with engraved 5-speed or 6-speed shift pattern. Finish is impeccable and very durable. It measures 40mm wide by 70mm tall. The duracon material is widely used in acing application and is not influenced by heat easily. Learn More
-
Beatrush Type-D Shift Knob
$89.99Tear drop shaped shift knob made by Beatrush from a duracon block that comes with engraved 5-speed or 6-speed shift pattern. Finish is impeccable and very durable. It measures 40mm wide by 70mm high. The duracon material is widely used in acing application and is not influenced by heat easily. Learn More
-
Jet Stream Windshield Banner
$99.99Windshield Banner by Jet Stream for NA (1989-1997) and NB (1998-2005) Mazda Miata/MX-5. A great looking banner to add a race car look to the Miata. Pre-cut for a easy install on to the windshield with the added benefit of blocking the sun for those that drive a lot in sunny areas. Perfect way to show support for Jet Stream, a company dedicated to Miatas. Comes in two great colors, orange and black. Learn More
-
Nielex Clutch Bracket Gusset
$134.99Clutch bracket reinforcement gusset by Nielex for NC (2006-2015) Mazda Miata/MX-5. In the NC Miata, the brackets for the pedals were made slightly weaker than those on the preview generation Miatas (NA/NB). Overtime the clutch pedal tends to see some play and feel sloppy on the foot. With the gussets, it strengthens the areas prone to failure and gets rid of any play. It will allow for smoother strokes of the pedal and become a lot easier to feel the biting point on the clutch. Having a lot more information being sent through your foot is crucial during track driving and will give you a lot more confidence during spirited drives. This is a three piece set and is made out of SPC that is 2.3 t thick. Installation requires welding so it is recommended to bring to a professional. Learn More
-
Garage Vary Intake Duct
$299.99Front Bumper Intake Duct Kit for the NC3 MX-5 (2013-2015) Miata made by Garage Vary. By forcing air to the OEM intake, the intake is able to make more power and increase throttle response. This will fit only on the NC3 models (last generation NC) with OEM bumpers. Learn More
-
Beatrush Rear Power Plant Frame (PPF) Bar
$249.99Power Plant Frame (P.P.F.) performance bar by Laile for NC (2006-2015) Mazda Miata/MX-5. Simple bolt on product that suppressed the movement of the differential during acceleration and deceleration giving a smoother ride. It also increases traction and tightens up the suspension as well. A must for those that track their Miatas where the change in speed is very sudden. Made of lightweight (2.5kg) 22mm diameter steel piping and 90 durometer urethane bushings with a gold finish. Learn More
-
Beatrush Direct Brake System
$114.99Brake Master Cylinder Stopper by Laile for NC (2006-2015) Mazda Miata/MX-5. Designed to prevent movement of the brake cylinder, the direct brake system secures the cylinder using a custom bracket resulting in more direct braking. Very simple to install without any modifications. A great addition for those pushing their Miatas to the limit and want more control of their braking. Learn More
-
R-Magic Lightweight Lug Nuts
$149.99Lug Nuts made by R-Magic out of SCM 435 Forged Chromoly for all Mazda veihcles (M12x1.5). It is heavier than aluminum and duraluminum, but it’s made to last much longer, too. It has been tested over and over on their D1 GP Demo Car under high stress and has never failed once. Learn More
-
Carbing Flip Up Tow Hook
$199.99The Carbing swiveling tow hook (front or rear) for 2006 to 2015 NC Miata is made of heavy duty steel and strong enough for emergency use. The towing hook has a foldable design and can be folded 90 degrees when not in use (also 0 and 180 degree locks). Learn More
-
Autoexe Lowering Springs
Regular Price: $399.99
Special Price $349.99
OEM quality lowering spring kit by Autoexe of Japan made for street and spirited driving. This kit is designed for the NC (2006-2015) MX-5 Miata and will provide a drop of about 20mm on all four corners. Additionally the spring rate is stiffer than OEM and will work well with either stock or aftermarket shocks! Learn More
-
Craft Square TCA-F Mirrors
$549.99These Craft Square F1-Style Touring Competition Mirrors are direct replacement mirrors for your NC (2006-2015) MX-5 Miata. They re-use OEM holes for an easy install and will not look out of place. Learn More
-
Cusco Sway Bars
$299.99Front And Rear Stabilizers Bars made by Cusco for the NC (2006-2015). This bar will have a very noticeable effect on handling. It will increase stability during cornering and high speed lane changing. Please note that the images are generic images, the actual sway bar shape will be slightly different. Learn More
-
Fujitsubo Authorize-R Muffler
Regular Price: $949.99
Special Price $899.99
Dual tips exhaust system by Fujitsubo for the NC (2006-2015) MX-5 Miata. The Authorize-R gives the car a racing look and sounds very sporty. The muffler improves performance (+3.5 hp and +2N/m torque at 6320 RPM). Learn More
-
Esqueleto Ducktail Spoiler
$674.99The Clima Rear Spoiler made by Esqueleto for the NC (2006-2015) MX-5 Miata follows lines of the vehicle perfectly. It does not hide the lighting coming from the third brake light. Learn More
-
Project Kics Kyokugen Heptagon Lug Nuts With Caps
$144.99Probably the longest name for lug nuts! These Kyokugen Lug Nuts made by Project Kics have a unique Heptagon (7-faces) shape making it hard to steal due to the irregular shape. It’s 28mm long with the cap (removeable) and give a nice look to the lug nuts of the car. Learn More
-
Project Kics R40 Lug Nuts
$174.99The Racing Composite R40 Lug Nuts made by Project Kics of Japan are some of their best available lug nuts. Made of Chromium Molybdenum (SCM 435 Forged) material, it has SUPER strength and also very low weight. This lug nut has a specific shape that cuts the unnecessary material from it. It’s available in both Glorious Black and NEOCHRO (Rainbow) finishes. Learn More
-
Project Kics R40 Iconix Lug Nuts
$239.99 As low as: $219.99The Racing Composite R40 Iconix (Iconics) Lug Nuts made by Project Kics of Japan are an evolution in design of their popular R40. Made of Chromium Molybdenum (SCM 435 Forged) material, it’s SUPER solid and will withstand abuse. The Iconix version has holes showing the color of the cap but is otherwise very similar to the R40. It’s aimed to give your wheel a nice and unique accent. Learn More
-
Project Kics Heptagon Caliber24 Lug Nuts
$149.99These lug nuts are aimed to for the anti-thief purpose with their heptagon shape. The 7-face nut looks normal from far, but will not fit with normal sockets (require adapter). They have beautiful titanium coating (unique blue) and are forged for extra strength. Learn More
-
RS Watanabe F8 17” Wheel
$626.63The F8 Type Wheel is made by RS Watanabe for the FR (Front Engine, Rear Wheel Drive) vehicles and will provide a clean and classic look to the Miata. It’s available in 17x7 to 17x9 sizes with many offsets and colors variations.Price is for 1 wheel that is BRAND NEW.
Please note that size of the wheels pictured are differents, please contact us if you need any details.
Learn More
-
Enkei Japan PFM1 17" Wheel
$294.99Mesh wheel made by Enkei Japan that is a remodel of the famous BORTEX M-II from 1999. The 17” size in 5x114.3 is suitable for NC MX-5 Miatas (2006-2015) and comes in aggressive fitments. It is available in dark silver and has mesh "Y" shape. The Y-Shape is made to evenly distribute stress to the wheel and reduce weight to its maximum. Price is for 1 wheel that is BRAND NEW. Learn More
-
Enkei Japan PF05 17" Wheel
$294.99Enkei’s latest design for their Performance Series Wheels : The PF05. This 5-spoke wheel in 5x114.3 is available in widths from 7” to an aggressive 9.5”. The design uses Enkei’s advanced techniques and the latest manufacturing methods. It gives a clean and aggressive look to any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Price is for 1 wheel that is BRAND NEW. Please note that 17x8.5 +38, 17x8.5 +48, 17x9 +20, 17x9.5 +35 and 17x9.5 +12 are only available in Dark Silver. Learn More
-
SSR GT-X 01 17” Wheel
Regular Price: $369.99
Special Price $324.99
The GTX01 Wheel made SSR is part of their new GT series. The 17” version in 5x114.3 comes in width from 8 inches to a super aggressive 10 inches and is available in multiple face colors. It’s a nice and aggressive super rigid wheel aimed for heavy track duty. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR GT-V 02 17” Wheel
Regular Price: $369.99
Special Price $324.99
The GTV02 Wheel made SSR is part of their new GT series. The 17” version in 5x114.3 comes in width from 7 inches to 8 inches and is available in Flat Black. It’s a nice and aggressive wheel that use slender spoke design. Glare Silver finish has been DISCONTINUED and no longer avialable. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Advan Racing RZ-II 17” Wheel
$534.99The Advan RZ2 wheels are a lighter version of the regular Advan RZ (evolution). The 17" (5x114.3) version is perfect for NC (2006-2015) MX-5. It’s the perfect balance between lightweight, wide and strong. The wheels have a deeper lip than the regular RZ model and still feature the beautiful dual 5 spoke (10 spoke) design. Learn More
-
Advan RG-D2 17" Wheels
$509.99The Advan RG-D2 Wheels are based on the RG-D wheel and aimed to provide an aggressive & concave look. Available in 17x7.5 to 17x9 in 5x114.3 these will look perfect on NC MX-5 application!
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference, actual wheel look may change depending on the size & offset.Please note that the 17x8 +37, 17x8.5 (all offsets) & 17x9 (all offsets) are NOT available in Champagne Gold + Machined Lip.
Learn More
-
SSR SP1R 17” Wheel
$674.99The Professor SP1R Wheel made SSR (Speed Star Racing) is the original 5-spoke wheel with full reverse rim. The 17 inches size comes in width from 6 inches to a massive 12 inches and is available in multiple face colors. It’s a nice 5-spoke design that literally looks awesome on any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR MS1R 17” Wheel
Regular Price: $659.99
Special Price $579.99
The Professor MS1R Wheel made SSR is their classy 8 point mesh design that’s made to look good on any vehicle. The 17 inches size comes in width from 6.5 inches to 12 inches and is available in multiple face colors. It’s a nice 8 multi-spoke design that looks awesome on any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR MS3R 17” Wheel
$684.99The Professor MS3R Wheel made SSR to provide with a unique and classic look. The 17 inches size comes in width from 6 inches to 12 inches and is available in multiple face colors. It’s a nice 7 multi-spoke design that looks awesome on any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR SP4R 17” Wheel
Regular Price: $649.99
Special Price $569.99
The Professor SP4R Wheel made SSR (Speed Star Racing) is a simple 5 spoke design aimed for those who want a clean look for their vehicle. The 17 inches size comes in width from 6 inches to a whooping 12 inches and is available in multiple face colors. It’s a nice 5-spoke design that literally looks awesome on any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR TF1R 17” Wheel
Regular Price: $649.99
Special Price $569.99
The Professor TF1-R Wheel made SSR (Speed Star Racing) is an aggressive design aimed mainly for the high performance cars. The 17 inches size comes in width from 6 inches to 12 inches and is available in multiple face colors. It’s a nice 15-spoke design that literally looks awesome on any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Works Bell Short Boss Hub
$214.99High quality boss hub kit from Japan made by WORKS BELL for the 2006-2015 NC MX-5 Miata. Steering wheel adapter that fits MOMO, Mazdaspeed, Sparco every other compatible steering wheels with MOMO bolt pattern. If you want to run a Nardi, you need to buy the optional adapter. Usually combined with steering wheel quick release.
Please note that USDM (USA) NC will require additional airbag resistor to completely remove the airbag warning light. Some countries have single while others have dual airbag resistors and if you are unsure, we recommend buying the additional sensor. Learn More
-
Nielex Racing Tow Hook
$194.99Towing hook by Nielex for NC (2006-2015) Mazda Miata/MX-5. Developed by Nielex with the goal to create a fully functioning tow hook that also gave the Miata a more aggressive, sporty look. Made from high quality SUS 304 stainless steel with a diameter of 75mm and thickness of 8mm it will be able to handle any towing situation needed. The length is adjustable allowing for fitment with multiple types of bumpers and also comes in two finishes of either high polish or raw blast finish. A great addition for those track builds where tow hooks are often times a requirement for the vehicle. Learn More
-
JoyFast High Speed Fan Relay Kit
$164.99Manual high speed fan switch by JoyFast for NC (2006-2015) Mazda Miata/MX-5. NC Miatas have a ECU that sets the fan speeds to low, medium or high on its own depending on the water temp. In performance situations though, the NC Miatas can spike very quickly making it hard for the ECU to keep up and possibly not having enough time to switch to a high fan setting cause the engine to overheat. Having a manual switch allows for full control of the cars cooling and is a must for those pushing their cars to the limit. It is strongly advised to pair with a water temperature gauge to better judge timing for the fan. Learn More
-
NoPro EZ Camshaft ll
$974.99Aftermarket performance Camshaft by NoPro for NC (2006-2015) Mazda Miata/MX-5. Offering multiple options, the EZ camshaft ll is a great option for anyone that wants to add a little more power to their engine. Whether it be street driving or demanding circuit laps these camshafts will be able to handle it. The CWS is perfect for street as well as mountain and track work with horsepower reaching over 200. Intake seat duration is set to 264 degrees and the exhaust seat duration is set to 244 degrees. The R is more aggressive and is ideal for time attack and circuit laps with horsepower reaching the 205 range with more mid to high end torque compared to the CWS which is a more gradual build up of torque. Intake seat duration is set to 264 degrees and the exhaust seat duration is set to 256 degrees. A essential piece for those building up their engines for extra horsepower. Springs and retainers are not included, please use the genuine (OEM) ones. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
NoPro Short Stabilizer Links
$254.99Shortened stabilizer links by NoPro for NC (2006-2015) Mazda Miata/MX-5. When vehicles are lowered the links connecting the sway bars get strained if left stock because of the more aggressive angles that they will be put in. The links are 50mm shorter in the front and 25mm shorter in the rear then stock and are for cars lowered 25mm - 50mm. By shortening the links the sway bar can align correctly with the car body and do it’s job. With the proper links a lowered car with have less roll and more control around corners with a steadier handling. A very necessary mod for any lowered vehicles. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
ZOOM Ventilation Phone Holder
$74.99Cellphone holder by Zoom Engineering for NA (1989-1997), NB (1998-2005), NC (2006-2015) & ND (2016+) Mazda Miata/MX-5. Why buy a low quality plastic phone holder when so much time and effort is spent on the rest of the car? The average phone holder looks cheap and stands out on the interior trim in a bad way. With these a/c vent phone holders material and build quality and material weren’t skimped on. The clamps are made with lightweight aluminum along side alumite and the bases come in either a fixed aluminum or a moving ball joint construction polycarbonate. The clamps come in two sizes, a medium holding phones from 55mm to 100mm wide and a large holding phones from 101mm to 115mm wide. The bases come in a short and long with the short handling a/c vents that are from 10mm- 24mm deep and the long handling vents that are 24mm-38mm deep. With multiple colors available, it is very easy to find one that best matches the interior of any vehicle. Learn More
-
ZOOM Aluminum Handbrake Handle
$104.99E-Brake handle by Zoom Engineering for NA, NB, and NC (1989-2015) Mazda Miata/MX-5. Very simple to install with a perfect fit, these handbrakes are a great way to get any Miata to stand out from the rest. With a comfortable outer diameter of 30mm along with two O rings, the grip is very natural and secure in the hand. Everything is measured out to fit perfectly so no modifications are required. 102mm overall length with a 19.8mm inner and 15.7mm diameter hole for the notch button. Made from high quality aluminum that is finished in multiple colors, it is very easy to customize to each vehicle. Learn More
-
RK Design Wheel Spacers
Regular Price: $54.99
Special Price $44.99
Wheel Spacers available in multiple thickness (3mm, 5mm, 8mm & 10mm) made by RK Design for the NA (1989-1997), NB (1998-2005), NC (2006-2015) and ND (2016+) MX-5/Miata. These wheels spacers are beautiful looking, but they are very high quality, too! They will help get a wider stance for the vehicle, but can also help for wheels to clear brake calipers if the fit is too tight. Please note that it comes in 2 pieces per set. If you need 4 wheels, please order a quantity of 2. Learn More
-
Nardi Deep Corn 330MM Italian Cross Stitching Special Edition
Regular Price: $347.87
Special Price $310.99
Special Edition (Italy Flag Stitching Color : White, Red & Green) Nardi Deep Corn Steering Wheel. 330MM size, black perforated leather with black anodized spokes & red, white & green stitching (triple stitching). Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 340MM Black Suede With Black Spokes
Regular Price: $327.31
Special Price $317.49
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
R-Magic Delrin Shift Knob
$94.99Shift Knob made by R-Magic that will fit the NA (1989-1997), NB (1998-2005), NC (2006-2015) and ND (2016+). Going in the opposite direction of the more common weighted shift knob, R-Magic decided to create a more light weight (93g) example when they realized the benefits of one in more technical situations such as circuit racing. A lighter knob will have less fatigue on the hands during more demanding shift changes and also is a lot more forgiving for the transmission during shifts that may have not been timed perfectly. Also during very hot days unlike a weighted full stainless steel knob, a lighter weight design won’t get as hot and feel a lot more comfortable in the hand. The delrin shift knob comes with a stylish aluminum H pattern plate to finish off the look. For those use to the heavier shift knobs, give one of these a go for more technical driving. Learn More
-
KEY!S Fossa Magna Shift Knob
$124.99Fossa Magna Edition Shift Knob from JAPAN made by KEY!S Racing that will fit ALL YEARS Mazda Miatas. It's a very cool shift knob that will fit on your vehicle and look pretty nice when paired with a Fossa Magna Steering Wheel! Learn More
-
ZOOM Trunk Rack
$629.99Trunk rack (carrier) made by ZOOM for the NC (2006-2015) Mazda MX-5. Made from highly durable corrosion resistant stainless steel (19mm diameter polished tubing), it can comfortably hold larger and heavier loads then other racks on the market. The front section is fixed using the OEM hardtop fixing screws and the back is supported by the rear fenders to avoid bending the trunk under heavy load. It can handle anything up to 50kg and 100cm x 54cm in size. The rack also incorporates a newly designed trunk linkage that allow the trunk to open and close with the rack still installed and also keeps the rack fixed to the trunk even when there is no weight on top. The rack come with two straps, one to put across diagonally and one vertically. A very functional piece to add more luggage space to the world's favorite roadster. Learn More
-
TK Style Front Lip
$334.993 pieces front lip made by TK Style for the NC2 (2009-2012) MX-5. High quality front lip made of FRP and/or Carbon Fiber (3 pieces). Please note that the Carbon Fiber finish is not UV coated and it is recommended to have it coated locally if you park the car under the sun most of the time. Learn More
-
R-Magic Power Coils
$849.99R-Magic now offers some upgraded engine coils for the NC (2006-2015) MX-5 Miata with either 2.0L MZR engine. This small modification helps improve engine output (power) in the whole RPM range. It prevents misfire and knocking as well. Learn More
-
NOPRO Short Antenna
$64.99Shorty Antenna (S2000 Style) made for the NC (2006-2015) & ND (2016+) MX-5 Miata by NOPRO. It replaces your OEM antenna while not losing frequency power by much. It is screw-in and takes maximum 30 seconds to install. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Jet Stream Clubman R03 Front Lip
$674.99Front Lip made by Jet Stream for 2013-2015 NC MX-5s that is very aggressive looking. It is the equivalent of the NC2 version that was developed for Japan Roadster Cup and ran by Fuji race champion. Learn More
-
Jet Stream Clubman R Side Steps
$499.99Side Steps made by Jet Stream for the NC2 (2009-2012) and NC3 (2013-2015) MX-5 Miata. Very aggressive side steps that gives lower & sleeker look to NC vehicles. Learn More
-
Kakimoto R Exhaust
$949.99Dual tips muffler system by Kakimoto Racing for the NC (2006-2015) MX-5 Miata. The R model is their racing model that's very popular among enthusiasts in Japan. Learn More
-
Nardi Classico Steering Wheel 360MM Black Leather With Black Spokes
Regular Price: $338.52
Special Price $324.20
Genuine Nardi Classic 360MM (Black Leather & Black Spokes + Grey Stitching) Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 330MM Wood With Black Spokes
Regular Price: $463.25
Special Price $407.66
Genuine Nardi Steering Wheel (330mm mahogany grip with anodized black spokes) imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
JUN Auto High Pressure Radiator Cap
$59.99High pressure radiator cap made by JUN Auto to give a nice touch to your MX5/Miata’s engine bay, but also helps the cooling efficiency of the system because of the higher pressure rating versus OEM unit. We recommend pairing it with an upgraded radiator and new/upgraded radiator hoses to avoid failure. Learn More
-
Nardi Gara3 Type-3 Steering Wheel 365MM Black Leather With Black Spokes
Regular Price: $374.96
Special Price $357.71
Genuine Nardi Gara 3 Type-3 Steering Wheel (Black Leather & Black Spokes (with leather cover) + Black Stitching) Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Odula Direct Clutch Line
$104.99Stainless Steel Braided Clutch Lines made by Odula for the 2006 to 2015 NC MX-5 Miata. These are replacement to your factory ones and don’t require any modification to the vehicle. The clutch pedal will be stiffer and will not be affected by heat. Learn More
-
NOPRO High Capacity Injectors
$574.99Injectors made by NOPRO Japan for the MZR 2.0L, 2.3L or 2.5L engine that can be used in the 2006 to 2015 NC MX-5. Those are meant to be used in high power vehicles and will be fine in card having between 270 and 310hp. It is necessary to do ECU tuning and adjust fuel pressure to engine specifications. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
NOPRO GT-Spec Side Skirts
$599.99Aggressive design side skirts made by NOPRO as part of their GT-Spec series parts for NC (2006-2015) MX-5. Although it was designed purely for racing, it can be also be used on public roads due to its good clearance. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Beatrush Floor Panel
$194.99Heel foot rests made of 2mm thick aluminum sheets to the shape of the NC (2006-2015) MX-5 floor mats. This product is intended for racing and avoiding any movement of the floor mats. IT WILL ONLY FIT RIGHT HAND DRIVE VEHICLES. Learn More
-
Autoexe Suede Documents Holder
Regular Price: $84.99
Special Price $67.99
It is called “Car Inspection Case” in Japan. This document holder is made to keep all your favorite shops business cards, insurance documents and maintenance paperwork for your favorite Roadster. It’s fancier than the cheap plastic ones that most dealership give. Learn More
-
Autoexe Kijima-Spec Coilovers
Regular Price: $1,749.99
Special Price $1,549.99
Height adjustable street suspension kit made by Autoexe for the NC MX-5 Miata (2006-2015). Designed to be both comfortable at low speeds around town and at the limit during spirited driving, this kit utilizes twin tube dampers to give a sporty but comfortable ride. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Cusco Street Zero-A Coilovers
Regular Price: $1,599.99
Special Price $1,519.99
Height adjustable suspension kit made by Cusco in Japan for the NC (2006 to 2015) MX-5 Miata. It has 40 possible adjustment from damping and can be lowered -87mm in front and -52mm in the rear. It comes with front and rear reinforced rubber upper mounts. Regular spring rate is 6kgf/mm front (7kgf/mm available) and 4kgf/mm rear (5 & 6kgf/mm available) but can be changed for free. Optional E-CON2 controller (damping force) available. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Esqueleto Ultimate Front Lip
$549.99Front Lip Spoiler (Skirt) made by Esqueleto for the NC1 (2006-2008) MX-5 Miata. It’ll give an aggressive and sporty look to the front end of the car. Learn More
-
Esqueleto Ultimate Side Skirts
$549.99Side Steps (Skirts) made by Esqueleto for the NC (2006-2015) MX-5 Miata. It’ll give an aggressive and sporty look to the side of the car while making it look lower as well. Learn More
-
Esqueleto Ultimate Rear Skirt
$549.99Rear Lip (Half Spoiler) made by Esqueleto for the NC (2006-2015) MX-5 Miata. It’ll give an aggressive and sporty look to the back of the car while making it look lower as well. Learn More
-
TRUST Rear Spoiler
$599.99Rear (Trunk) Spoiler made by TRUST Power for the NC (2006-2015) MX-5 Miata. It’s available for both the Soft Top and the PRHT (RHT) model. Learn More
-
Garage Vary Trunk
$524.99Replacement Trunk made by Garage Vary for the NC (2006-2015) MX-5 Miata. It’s made of FRP or Carbon Fiber and will shave some weight off the back of the vehicle. Learn More
-
Garage Vary Front Under Flap
$549.99Front Diffuser (Underflap) made by Garage Vary for the NC3 (2013-2015) MX-5 Miata. It’s a flat FRP piece that fits under the OEM Front Bumper to make the look of the car flatter and improve aerodynamics. Learn More
-
Jubiride Shift Knob
$84.99Beautiful aluminum shift knob made by Jubiride for ALL YEARS (NA, NB, NC or ND) MX-5 Miata. It has a really simple, but nice and great feeling design. Learn More
-
ATC Carbon Fiber Steering Wheel
$524.99Steering Wheel based on the ATC 325R (Flat) with a Carbon Fiber Center. It’s available in leather or suede and has the “ATC Racing” logo embroidery at the bottom of the steering wheel. The steering wheels are made in Japan and made of the best quality. You need to have an aftermarket steering wheel boss hub kit to use this steering wheel in your car. Learn More
-
ATC Steering Wheel Top Mark
$29.99Steering Wheel Ring made of Leather or Suede in various colors (gray, yellow, blue or red) to help determine the position of the steering wheel (it’s also called a “12 o’clock mark). It can be used on any type of steering wheel. Learn More
-
ATC Titanium Steering Wheel Bolts
$59.99Competition Steering Wheel Bolts made by ATC for use with aftermarket steering wheels. These will replace your old bolts with top of the line titanium material. It’s available in silver, pink, blue or “aurora” (greenish) finish. Learn More
-
Beatrush Type-Q Shift Knob
$84.99Ball (round) shaped shift knob made by Beatrush in aluminum for ALL YEARS Miatas. The anodized finish is impeccable and very durable. It has a 44.5mm diameter. It’s available in multiple colors and feels really good in hand. Learn More
-
Nardi Classico Steering Wheel 360MM Black Leather With White Spokes
Regular Price: $338.52
Special Price $326.67
Genuine Nardi Classic 360MM (Black Leather & Silver/White Spokes + Grey Stitching) Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
ZOOM Penta 235 Rear View Mirror
$284.99The Penta 235 (Pentagonal 235mm) rear view mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 240mm wide by 73mm vertical. It offers a wider view than OEM mirror even tough it's smaller. Its blue tinted window also will help reduce glare from cars behind your vehicle. Learn More
-
Jupiter Blue Rear View Mirror
$69.99Rear view mirror lens kit for the NC1 & NC2 (2006-2012) MX-5 Miata made by Jupiter. This lens install over your stock room mirror and is fantastic for driving at night by reducing glare. Additionally during driving in daylight your vision stays about the same! Learn More
-
HPI Racing 4-Point Harness
Regular Price: $399.99
Special Price $349.99
HPI Racing has been making harnesses for years and is recognized as one of the best brands in the market. Their racing harnesses are FIA approved, making them legal is most racing series. Not only are they amongst some of the best brands in the world, but they also are available in multiple finishes to be as unique as your vehicle. Please note that some photos show silver brackets, but the harnesses come with black brackets. Please note that installation will require a harness bar (also sold at REV9 Autosport). Learn More
-
Bride Gradation Floor Mats
$229.99Luxury Gradation “Bride” Logo Floor Mats made for the NC (2006-2015) MX-5 Miata with Right Hand Drive (RHD). They are made of durable rubber to outlast your vehicle and add a nice touch of styling to your floor. Learn More
-
Zero Small Square Floor Mats
$199.99High quality checkered floor mats for the 2006-2015 NC MX-5 Miata. They are made in Japan and available for right hand drive (RHD) Miatas. They are made from durable materials and available in 10 different colors! They come with beautiful ZERO metal plate on the driver's floor mat. Please note that photos are showing the ND (2016+) model, but you will receive the NC (2006-2015) model. Learn More
-
Zero Checkered Floor Mats
$199.99Superb quality (big square pattern) checkered floor mats for the NC 2006-2015 MX-5 Miata. They are made in Japan and available for right hand drive (RHD) oadsters. They are made from durable materials and available in six different colors! They come with beautiful ZERO metal plate on the driver's floor mat. Please note that photos are showing the ND (2016+) model, but you will receive the NC (2006-2015) model. Learn More
-
Zero X-Pattern Floor Mats
$199.99Top quality cross (X) diamond-shaped floor mats for the 2006-2015 NC MX5 Miata. Made in Japan and available for right hand drive Roadsters, they are made from durable materials and available in 7 different colors! They come with beautiful ZERO metal plate on the driver's floor mat. Please note that photos are showing the ND (2016+) model, but you will receive the NC (2006-2015) model. Learn More
-
D.Speed Luck Stickers
$29.99Want to add a little charm to the interior or exterior of your car? This is for the superstitious ones that want to make sure nothing bad will happen to their car! The sticker shows “TOP OF THE WINDING ROAD” ; “PRAY TO GODS BY D.SPEED”. Price is for 2 stickers. Learn More
-
Nardi Deep Corn Revolution 350MM (Brown Leather) Steering Wheel
Regular Price: $379.17
Special Price $359.93
Genuine Nardi (Rally) Deep Corn Steering Wheel (350mm) imported from Italy! This steering wheel is showcasing the Nardi new Brown Leather that is super smooth and feels awesome to the touch. The center piece has a brown anodized finish that's close to black, but with subtle difference. Learn More
-
REV9 NC1/NC2/NC3 Matte Black Emblems
$194.99Three emblems set for the NC MX-5 (2006-2015). Front/Rear Mazda Sings & Roadster Sign (from the NC or ND MX-5) that have a special Matte Black finish, made especially for REV9 Autosport. This is a very subtle change that will not make your car look cheap. Picture shows the ND "Roadster" emblem. Please note that the image shows ND emblems. NC emblems are similar but does not include the Skyactiv emblem.
We recommend choosing "ND (New) Version" badge as the "NC Version" becomes hard to read due to its shape. We will not accept any returns related to "NC Version" emblem if choosen.
Learn More
-
Leg Sport Semi-Rigid Differential Mounts
$224.99Hi-Spec series of semi-rigid differential mounts made by Leg Sports for the 2006 to 2015 NC MX-5 Miata. Leg Sport has tested many different hardness to find the best compromise for high performance while not compromising the street driving capability of the car. Learn More
-
Odula Radiator Hose Sandwich Hose
$69.99Sandwich Hose made by Odula for the NC (2006-2015) MX-5 Miata. This hose is made so that you can fit a water temperature sensor to the radiator hose. Learn More
-
TWS T66-F 17” Wheel
Regular Price: $749.99
Special Price $649.99
The TWS T66-F 17" Forged Wheels are some of the lightest (if not the lightest) wheels available for the NC (2006-2015) MX-5. These are the ultimate light weight wheels you can put on your Roadster. The wheel is 1 piece forged, made for racing and is ULTRA lightweight and strong! TWS wheels are used by Aston Martin for their race cars exclusively. Not only they are super light, they also can take abuse from the track and look awesome! Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Autoexe Evolution Wipers
Regular Price: $114.99
Special Price $97.99
Replacement wiper blades made by Autoexe Japan that will fit ALL YEARS Miatas. No need to get additional Wiper Wing, it is included. The new (evolution) wiper blades have aerodynamics fins that will provide pressure to avoid wiper lift at high speed. Learn More
-
Leg Sports Traction LSD
$1,099.99Based on the Cusco Type-RS LSD, this Limited Slip Differential made by Leg Sport for the NC (2006-2015) MX5 Miata is made to provide a better street, track and winding road experience. Learn More
-
Suruga Speed Loop Muffler
$2,299.99The Suruga Speed Loop Muffler is made to sound music to all NC (2006-2015) MX-5 Miata drivers. It took hours and hours of testing and design to come up with a perfect level of high pitch at high RPM and almost stock noise at low RPM/idling, so it’s only heard when necessary. Learn More
-
Odula Urethane Differential Mount
$249.99Durable urethane differential mount made by Odula of Japan for the NC (2006-2015) MX-5 Miata. This urethane unit replaces the stock rubber unit to increase acceleration response and increase traction! Learn More
-
Odula Rigid Member Collars
$139.99Rigid member collar kit made by Odula of Japan. Designed for the NC MX-5 (year 2006 to 2015), these member collars help to fill in tiny spaces between the suspension member and body of the vehicle to increase rigidity. These also increase handling capabilities! Learn More
-
Odula GT-Type Side Steps
$599.99The GT-Type Side Skirts made by Odula for the NC (2006-2015) are meant to improve aerodynamics at its maximum. It’s what they used on their NC GT Car who was very competitive in the Japanese racing classes which only allows aerodynamics. Learn More
-
Kakimoto Class KR Exhaust
$1,249.99The Class KR Muffler System made by Kakimoto Racing for the NC (2006-2015) MX-5 Miata is meant for those who want to have a low noise exhaust but improve the power. It’s perfect for city driving and meant to improve the torque of the vehicle. It passes the very strict noise test in Japan, so it should be legal in most countries. Learn More
-
TUCKIN99 Lightweight Flywheel
$374.99Lightweight Fly Wheel made by TUCKIN99 for the 2.0L NC (2006-2015) MX-5 Miata. TUCKIN99 tested many flywheels weight to find the perfect balance between performance and reducing idling roughness. Learn More
-
Carbing Passenger Floor Plate
$139.99This is for those who race with someone on the passenger seat of your NA, NB or NC MX-5 Miata. This floor plate helps improve grip to the passenger and support him firmly in his seat during cornering and sudden braking. Please note that this is a general purpose item and not Miata-specific, however, it’ll fit nicely in the NA & NB/NC Miata chassis. Learn More
-
Beatrush Oil Cooler Sandwich Plate
$144.99Adapter made to fit oil lines between the engine and oil filter for the purpose of installing an oil cooler on your Miata. It’s the missing part for your DIY install! Learn More
-
JoyFast High Spark Ignition Coils
$484.99Higher voltage ignition spark coils made by JoyFast for the NC MX-5 Miata from 2006 to 2015. This product will increase the voltage of the ignition and provide more low/medium torque as well as improved acceleration. This piece has been tested on a NC car for years and has survived over 200,000KM (120,000 miles)! If your car has over 30,000KM-40,000KM it’s a recommend product to replace your OEM ones. Learn More
-
Integral Kobe Differential Mounts
$234.99Master Spec differential mount made by Integral Kobe of Japan for the NC (2006-2015) MX-5 Miata. Those are made to reduce the movements from the rear differential, improve response during shifting up and traction performance. Learn More
-
Spoon Rigid Collars
$274.99Rear Rigid Collars manufacturer and patented by Spoon for the Mazda MX-5 2006-2015 (NC). It is a full set (front and rear) made of 12 pieces. These pieces install between the body and subframe to reduce the little gap that will cause low-level vibrations and reduce overall rigidity of the car. The Rigid Collars will : -Reduce pull-up/oscillation during engine start up -Vibration is reduced during idling -Straight line stability is improved -Steering adjustment is reduced -Rolls smoother & reduce fatigue during driving In other words, it'll improve the ride greatly. Please note that photo is not the actual product, but a rendition of it. Learn More
-
HKS Legamax Premium Exhaust
Regular Price: $1,299.99
Special Price $1,149.99
Dual tips exhaust system by HKS Japan for the NC (2006-2015) MX-5 Miata. The Legamax Premium Exhausts are made to give the car a luxurious (improved) look and a nice tone that can be handled on a street car. Please note that 2010+ vehicles with 6-speed Manual Transmission may have interference with rear bar. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Cusco Type-RS LSD
Regular Price: $1,199.99
Special Price $924.99
The Type-RS Limited Slip Differential from Cusco made for the 2006 to 2015 NC MX-5 Miata is designed to be used for sport and city driving. It is a mechanical LSD that has a high response and very high durability. It’s available in 1 Way, 1.5 Way & 2 Way. The LSD can be converted to Type-MZ by changing internal parts. Learn More
-
Cusco Type-MZ Limited Slip Differential
Regular Price: $1,199.99
Special Price $974.99
The Type-MZ LSD from Cusco made for the 2006 to 2015 NC MX-5 Miata is designed mainly for racing use and provides high stability. It is a mechanical LSD that provides initial torque straight to the wheels. It’s available in 1 Way, 1.5 Way & 2 Way. The LSD can be converted to Type-RS by changing internal parts. Learn More
-
Autoexe Helical Short Antenna
$74.99Shorty Antenna (Helical) made for the NC (2006-2015) & ND (2016+) MX-5 Miata by Autoexe. It replaces your OEM antenna while not losing much frequency power. It has a high sensitivity helical coil inside to provide the best reception considering its size. It is screw-in and takes maximum 30 seconds to install. Learn More
-
Project KICS Monolith T1/06 Lug Nuts
$224.99Forged lug nuts (made of SCM435) by Project Kics with a 22mm diameter size. The design of these lug nuts are made to give thieves a hard time. It’s available in 2 colors (Glorious Black & Neochro) to suit pretty much any wheel color. Learn More
-
Project Kics Leggdura EL53 Shell Type Lug Nuts
Regular Price: $299.99
Special Price $249.99
Lightweight shell lug nut made in Japan by Project KICS. They are shell-type (2 pieces: inner and outer lug nut) and comes with 1 lock nut per every wheel. It is one of the hardest type of lug nut to steal. It is also possible to install an optional compression bolt. The 2 pieces design is also very nice as it's removable by hand using a tool, so that you can remove them before bringing them to the shop (to keep them intact). The shell (outer piece) is made of Aluminum and the lug nut itself is made of Duraluminum (forged aluminum) which is the most commonly used material in racing vehicles due to its durability and lightness. Learn More
-
Enkei Japan Racing PF01 EVO 17" Wheel
$294.99The PF01EVO is a light, split 5-spoke deep dish wheel made for the hard tuners and only available in aggressive offsets. It's a great fit for the NC (2006-2015) MX-5 with 5x114.3 bolt pattern.
Our unique roulette pattern is grooved on the rim to reduce the slippage ratio between tire and rim. The roulette-pattern maintains the best condi- tion of the wheel and tire assembly, thus achieving the highest perfor- mance during extreme acceleration and deceleration. The roulette pattern is also used for McLaren Mercedes Formula One racing wheels.
Learn More
-
Enkei Japan Racing PF01SS 17" Wheel
$274.99The PF01 SS (Special Stage) is a performance, split 5-spoke wheel with deep lip made for the circuit use and only available in 17x9. It's a great fit for the NC (2006-2015) MX-5 with 5x114.3 bolt pattern.
Our unique roulette pattern is grooved on the rim to reduce the slippage ratio between tire and rim. The roulette-pattern maintains the best condi- tion of the wheel and tire assembly, thus achieving the highest perfor- mance during extreme acceleration and deceleration. The roulette pattern is also used for McLaren Mercedes Formula One racing wheels.
Learn More
-
Project Kics Leggdura Valve Caps
$39.99Valve stem caps made by legendary Project KICS that will match your lug nuts finish. Since it's bigger than OEM ones, it'll add a nice touch to your wheels. It's made of A6063-T5 light aluminum. Learn More
-
Work Seeker CX 17” Wheel
$469.99The Work Seeker CX 17 inches Wheels have a nice cross-mesh design that will stand out from the crowd. It’s available in 17x7 to massive 17x10.5 size. It’s a straight line and curves design that they classify as neo-classical.
Learn More
ND OEM Brembo Brakes Compatibility :
Confirmed : (Rdisk)
-
Jet Stream Window Vent
$174.99Looking to get fresh air in your Miata? This cool and easy to install/remove piece made by Jet Stream will install in the driver and passenger triangle window of your NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. Its design allows to stay permanently and has a moving mechanism that allows changing its position when not in use. It can also be installed temporarily using suction cups mounts. Learn More
-
Garage Vary Type-N Rear Spoiler
$499.993 pieces rear spoiler made by Garage Vary for the non-PRHT NC MX-5 Miatas (2006-2015). It’s has a 3 pieces design so the trunk weight is not affected so much and provides a nice, wide and aggressive look to the back of the vehicle. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
ZOOM Monaco 203 Mirror
$244.99The Monaco 203 room (rear view) mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 203mm wide, 63mm vertical and 85mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle. Please note that the shape is made for Right Hand Drive but can also be used on Left Hand Drive, however, you might see a part of your body in the mirror view. Learn More
-
SSR GT-V 01 17” Wheel
Regular Price: $369.99
Special Price $324.99
The GT-V 01 Wheel made SSR is part of their new GT series. The 17” version in 5x114.3 comes in width from 7 inches wide. It's a very easy fitment that will change the look of the vehicle, making it more aggressive looking. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR GT-X03 17" Wheel
Regular Price: $359.99
Special Price $314.99
The GTX03 Wheel made SSR is part of their new GT series. The 17” 5-spoke wheel in 5x114.3 comes in 7” width and is available in multiple face colors. It’s a nice and aggressively designed wheel that looks really nice. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SARD Racing Drain Plug Mag II
$49.99-Powerful magnet -Catches iron powder/debris -Only available for NA (1989-1997), NB (1998-2005), NC (2006-2015) & ND (2016+) MX-5 Miata Learn More
-
RS Watanabe F8F 16” Wheel
$554.25The F8F Wheel is made by RS Watanabe to provide great brake (caliper) clearance and relatively flat face. It’s available in 16x6.5 to 16x8 sizes with many offsets and colors variations.Price is for 1 wheel that is BRAND NEW.
Please note that size of the wheels pictured are differents, please contact us if you need any details.
Learn More
-
HPI Racing Clutch Line
$124.99Stainless steel clutch line made by HPI for the NA (1989-1997), NB (1998-2005) & NC (2006-2015) MX-5 Miata. It eliminates all possible “play” from the OEM rubber hose, resulting in a sharp feeling when pressing the clutch. The hose body is made of stainless steel, mesh, Teflon, and the outside uses a clear hose for protection. All hoses are pressure tested. Learn More
-
Beatrush Floor Reinforcement Bar
$224.99Cross bar made by Beatrush (Laile) for the 2006-2015 NC MX-5 Miata to improve floor stiffness and join both sections of the transmission tunnel. It is especially well working on open-top vehicles (roadsters). Since it is an aluminum D-section oval shaft, the extra weight is minimized and the ground clearance is not reduced by too much. Learn More
-
KEY!S Anniversary Steering Wheel
Regular Price: $424.99
Special Price $399.99
Genuine KEY!S Anniversary Special Edition Racing Steering Wheel imported from Japan. It’s available in leather or suede finish and has very cool black and blue stars embroidery. Learn More
-
KEY!S Drift Steering Wheel
$389.99Steering Wheel made by KEY!S designed for drift use! It’s got a round shape and has 345mm diameter. It’s available in both leather or suede finish. Learn More
-
Nardi Prestige Revolution (Brown Leather) Shift Knob
Regular Price: $139.99
Special Price $104.99
Shift Knob made by NARDI that will fit ALL YEARS Miatas. This shift knob is showcasing the Nardi new Brown Leather that is super smooth and feels awesome to the touch Matches Nardi Revolution Steering Wheel!
Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
DO Engineering Meter Hood
$399.99Cluster Cover made by DO.Engineering for the 2006 to 2015 NC MX-5 Miata. It’s made to provide with an extra 2 gauges (60mm diameter) for those who want to monitor their engine during racing. This product comes in black gel coat and they recommend spray painting it flat black to avoid reflections. Learn More
-
DO Engineering Rear Spoiler
$474.99Rear Spoiler made by DO.Engineering for a soft top (non-PRHT) version of the NC (2006-2015) MX-5. It’s perfect fitting and gives a factory (optional) look. The spoiler comes unpainted. Learn More
-
Nardi Competition Steering Wheel 330MM Black Suede With Black Spokes
Regular Price: $313.30
Special Price $303.25
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nielex Heavier M2 Shift Knob
$129.99This shift knob was designed based on the M2-1002 factory shift knob, but with heavier weight in mind. It’ll make shifting easier and feels REALLY good. It qill fit all years Mazda MX-5 Miatas. Learn More
-
DO.Engineering Oil Cooler
$1,024.99Engine Oil Cooler made by DO Engineering for the NC (2006-2015) MX-5 Miata. It comes with a FRP duct to draw even more air to it, making it a very functional piece. During intense racing, the engine of NC tends to get hot (up to 130 degrees) and shortage of oil can cause damage to the engine. By installing an engine oil cooler, the oil temperature can be lowered and the load on the engine during circuit driving can be reduced significantly. When temperature is high, ECU will reduce power automatically. By installing the oil cooler, the reduced power feature will not happen and engine will run at full power, at all time, for better lap times. The small size of the oil cooler will not reduce the cooling from the radiator. A built-in thermostat is used to prevent overcooling due to very low oil temperature even in winter, and the engine oil temperature is always controlled to be within the appropriate range. Learn More
-
DO.Engineering Fresh Air Duct
$249.99Cold Air Ducting made by DO Engineering for the NC (2006-2015) MX-5 Miata. It will bring fresh air straight to the factory airbox with high efficiency. This product was so effective that it’s received the certification to be used in the Fuji Champion Race in Japan. Please note that removal of front bumper is required for installation. Learn More
-
DO.Engineering Front Lip
$599.99Front air dam made by DO Engineering for the NC1 (2006-2008) MX-5 Miatas. It installs to OEM under panel (but requires some trimming). Learn More
-
MZ Racing Document Holder
$124.99Document holder made of carbon-pattern vinyl by MZ Racing. It’s made to hold maintenance records, owner’s manual and 3 regular-sized cards. It’s a great looking product for those with a little OCD. Learn More
-
MZ Racing Tire Covers
$129.99Tire protective covers from MZ Racing that are made to fit 16 inches tires. It’s made to protect your interior when bringing tires to a race or the tire shop. It’s also made to prevent ultraviolet light from deteriorating the tires during storage. Learn More
-
Mazda Roadster 2020 (ND) JDM Emblem
$44.99Original "Roadster" badge from JDM (Japan-spec) 2020+ (UPDATED) ND Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. The 2020 model has a regular font type, compared to the 2016-2019 model with "italic" font. Please note that the pins behind don't line up with OEM "MX-5" emblem. It means that may need to remove the pins and fill holes from previous emblem. Learn More
-
Zeromotive Rubber Floor Mats
Regular Price: $139.99
Special Price $119.99
All Weather Floor Mats made by Zeromotive for the 2006 to 2015 NC MX-5 Miata. These floor mats are made to be easy to clean (can be easily washed with water) and have a nice look with their coloured border. Learn More
-
NOPRO High Spark Coils
$424.99High Spark Coils made for the NC 2.0L MZR Engine by NOPRO. It’ll fit the 2006 to 2015 model. It’s a simple replacement of the OEM coils to these and it’ll help by improving the fuel/air mixture, compression and ignition. All these factors lead to more response and improved power as well. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Voltex Type-1 & Type-2 GT Wing
$1,749.99GT Wing made by Voltex with dedicated mount stays for the NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. It's an awesome looking GT Wing that will help improve downforce and shave some time from your lap times. It will fit either the soft top or the PRHT/RHT models (NC). Please note that the trunk mounts for NA and NB will look similar to the ones on the yellow trunk photo. Photo of the grey trunk show Type-2 1600mm wing (on a Honda Civic trunk). Red NC Specs : Type-1 / 1400mm width / 225-245mm height (estimated) / Type-A Endplates Voltex Products are currently under heavy production load and delays are ~10 months currently. If delays are longer than 10 months, we will email you with ETA. Learn More
-
Enkei Japan RPF1 17" Wheel
$284.99The RPF-1 wheel made by Enkei is one of the most widely used racing wheel for enthusiasts. Available in 17x7 all the way to 17x10 (5x114.3), this light weight dual 6-spoke design has been one of the most popular wheel used in motorsports (based on McLaren F1 vehicle). It’s available in 2 colors : Silver & Matte Black. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Enkei Japan NT03RR 17” Wheel
$394.99The Enkei NT03RR is one of Enkei’s most unique wheel you can get. Available in 17x7, 17x7.5, 17x8 & 17x9 (5x114.3), this wheel design has been around since 1998 and its goal was to improve performance while achieving concaveness. It’s available in 4 colors : Hyper Silver, Matte Dark Gunmetallic, Matte Sparkle Silver & Glacial White. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Work Meister M1 17” Wheel
$614.99The Work Meister M1 is a mesh 3-pieces wheel with 10 intersections made to give your vehicle a nice classic & traditional look.It’s available sizes from 17x7 all the way to 17x13 with various offsets!
Learn More
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference.
The actual wheel look will be different based on its size. Due to many offset/face type, we will contact you to confirm the wheel offset/face type.
ND OEM Brembo Brakes Compatibility :
Confirmed : 17x9 +19 (Adisk)
ND OEM (2.0L) Brakes Compatibility :
Confirmed :
-17x8 -7 (A-disk )
-17x9.5 -26 (A-disk)
-17x9 +19 (A-disk)
-17x8 +31(Adisk) (Front Only)
-17x8 +31 (Adisk) (Rear Only)
- 17x8 +29 (Odisk) (Rear Only)
Clearance Issue : 17x7.5 +35 (O-disk)
-
BBS Japan RF 17” Wheel
$849.99The BBS RF is an elegant and lightweight twin 5-spoke wheel that’ll make your Roadster look much more luxurious. It’s available in 17x7 & 17x7.5 (5x114.3) and will be easy to fit on stock height and lowered vehicles!
Learn More
Price is for 1 wheel that is BRAND NEW.
-
BBS Japan RG-R 17” Wheel
$809.99The RG-R wheel by BBS is an eight cross-spoke design wheel that’s super light and classic looking. Available in 17x7 to 17x8.5 (5x114.3), it’s aimed to be a super light and will fit stock height or lowered vehicles (depending on width). Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size.
Learn More
-
Advan TC-4 17" Wheels
$516.99The Advan TC4 Wheels are aimed to optimize balance between strength and weight reduction. Available in 17x7.5 to 17x9.5 (5x114.3) these will look perfect on NC (2006-2015) applications!
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference, actual wheel look may change depending on the size & offset.
Learn More
-
RS Watanabe Titanium Lug Nuts
Regular Price: $574.99
Special Price $499.99
Titanium Lug Nuts made by RS Watanabe for ALL YEARS Mazda Miata (1989+). It’s made of Grade 5 64-Titanium to ensure durability and extreme lightness of the lug nuts. Please note that the blue lug nuts will discolor once touched, but returns back to color when washed with water. Learn More
-
Work Seeker MX 17” Wheel
Regular Price: $574.99
Special Price $439.99
The Work Seeker MX Wheels have a nice mesh design, but what makes them unique are the vent holes surrounding the disc, making it a truly unique wheel. It’s available in 17x7 to wide 17x10.5 size. It has flat face design with solid attention to detail. It’s a unique design that’ll sure make heads turn.
ND OEM Brembo Brakes Compatibility :
Confirmed : (Rdisk)
Learn More
-
REV9 NC1/NC2/NC3 Gloss Black Emblems
$214.99Set of emblems/badges for the NC MX-5 (2006-2015). Front/Rear Mazda Sings & Roadster Sign (from the NC or ND MX-5) that have a special Gloss Black finish, made especially for REV9 Autosport. This is a very subtle change that will not make your car look cheap. Picture shows the ND "Roadster" emblem. Please note that the image shows ND emblems. NC emblems are similar but does not include the Skyactiv emblem.
We recommend choosing "ND (New) Version" badge as the "NC Version" becomes hard to read due to its shape. We will not accept any returns related to "NC Version" emblem if choosen.
Learn More
-
WedsSport TC105X 17” Wheel
$424.99The TC105X by Weds Sports is the evolution of the popular TC105N Wheel. Available in 17x7.5, 17x8, 17x8.5, 17x9 & 17x9.5 with multiple offsets (5x114.3), it’ll come in a size & offset that will suit your needs. The TC105X is lighter than its predecessor because of side cuts in the spokes (and it doesn’t affect strength). It also has shaved parts behind the spokes for additional weight reduction. The shape of the wheel is made to accommodate bigger brakes without needing a wider wheel. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-25R 17” Wheel
$298.74The SA25R wheel by Weds Sports is for those who run bigger brakes and want an aggressive look. Available in 17x7 & 17x7.5 (5x114.3), it’ll suit most people’s needs. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-35R 17” Wheel
$298.74The SA35R wheel by Weds Sports is a 15-spoke design meant to give a classy, but aggressive look to the car. Available in 17x7 & 17x7.5 (5x114.3), it’ll suit most people’s needs. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-77R 17” Wheel
$283.74The SA77R from Weds Sports has a double 7-spokes design meant to give a neat and sporty look to the car. Available in 17x7 & 17x7.5 (5x114.3), it’ll suit most people’s needs. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-20R 17” Wheel
$298.74The SA20R wheel by Weds Sports has a 20 spokes mesh design meant to give a classy look to the car. Available in 17x7 & 17x7.5 (5x114.3), it’ll suit most people’s needs. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-10R 17” Wheel
$308.74The SA10R wheel by Weds Sports is a 10-spoke design meant to give a concave look without having extremely low offsets or wide wheel. Available in 17x7 & 17x7.5 (5x114.3), it’ll suit most people’s needs. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Rays TE37 Saga S-Plus 17” Wheel
$814.99The TE37 Saga S-Plus is Volk Racing last design for racing wheel. Available in 17x7.5 to 17x9 (5x114.3), it has the same design as the TE37 Saga, but features slightly thicker spokes for even more rigidity. This translates by around 100g to 120g heavier weight per wheel which can hardly be felt. They now introduced sizing for NC MX-5 (2006-2015) in 5x114.3 that will either fit under OEM fenders or require body work/fender flares! The TE37 Saga S-Plus is an improved version of the regular TE37 design (20 years old) so that it’s perfect for the stress that comes from high power cars. They are available in Faces 1, 2, 3 and 4 which is either flat, semi-concave or concave. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Autoexe Sports Steering Wheel V2
$499.99Beautiful and classy D-Shape replacement steering wheel made by Autoexe for the 2006 to 2015 NC MX-5s. The version 2 has the following changes compared to the first version : Nappa Leather (higher quality than OEM), Embossed Autoexe Logo & 12 O'Clock Red Top Mark. It's a steering wheel that requires to re-use your existing airbag and audio controls / trims on the steering wheel. Installs in about 30 minutes! Autoexe carefully crafted the wheel, using a mixture of solid leather and dimpled leather for a very sporty look. Autoexe also wanted to ensure that meter visibility and steering feel were not impacted, so elected to use the same diameter as stock (370mm). With this kit not only do you get the sportier look in your interior, you also retain function of your stock airbag for ease of auto inspection as well as safety! Learn More
-
Jet Stream Air Intake Funnel
$174.99Jet Stream Air Cleaner Box Funnel is made for the 2006 to 2015 2.0L NC MX-5 Miata. It's designed to help with the torque at low, mid and high level RPM. The installation is very simple using double-sided tape. Learn More
-
Blitz Racing Oil Filter
$49.99Blitz, with their proven track record of air filters now enters the oil filter game. It’s available for the NA (1.6L & 1.8L), NB (1.8L), NC (2.0L) & ND (1.5L & 2.0L) MX-5 Miata (1989+). It's designed to handle high level of pressure and heat and maximize filtration of oil. Learn More
-
KICS Magnet Drain Bolt 2
$44.99New version of the magnetic drain bolt by Project Kics for ALL YEARS Mazda Miata/MX-5. A very important part that is often overlooked but is essential for engine health. Designed so that the magnets don’t interfere with any of the engine components but still strong enough to capture any metal fragments that may make its way into the oil. Made from light alloy and finished with a heat resistant paint, It can withstand the high temperatures of the oil to insure protection during the most crucial times. This drain plug is a great way to check on engine health when draining the oil and will also help prevent a early issue from escalating into something worse. Learn More
-
326POWER Titanium Steering Bolts
$84.99Steering Wheel Bolts made of 64 Titanium alloy (Ti-6AL-4V) available in 5 different finishes. They are high strength, look awesome and have excellent resistance to corrosion. Learn More
-
Car Make Corn's Navy Blue Leather Seats
$984.99Awesome navy blue (dark) synthetic leather racing seats made by Car Make Corn's. It has a very classy look. Available with regular (horizontal) stripes, it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
Car Make Corn's Camel Leather Seats
$984.99Beautiful Camel (dark tan) synthetic leather racing seats made by Car Make Corn's. It has a very classy look. Available with regular (horizontal) stripes, it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
Car Make Corn's Beige Leather Seats
$984.99Light beige (tan) synthetic leather racing seats made by Car Make Corn's. It has a very classy look. Available with regular (horizontal) stripes, it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
Odula Carbon Fiber Shift Knob
$109.00Shift Knob made by Odula with real Carbon Fiber outer shell for the NC (2006-2015) and ND (2016+) MX-5 Miatas. The inner section is made of aluminum, giving it a weight of 170g. Learn More
-
Car Shop Glow LED Tail Lights Ver.1
$1,899.99High Quality LED Tail Lamps made by Car Shop Glow for the 2006 to 2015 NC MX-5 Miata. It is hand made and quality cannot compare to mass-produced products seen elsewhere. It comes pre-installed with a high-flash canceller to have the regular signaling flow. It gives a really modern (Audi-style) look to the rear end of the car. Learn More
-
Odula Titanium Hood Bar
$199.99Titanium Bonnet Bar made by Odula for the NC (2006-2015) and ND (2016+) MX-5 Miatas. It’s made of titanium and will give a very cool look when you show the engine to your friends. Please note that since this is a handmade product, the titanium gradation might not look exactly like the photos. Learn More
-
Rays Model 37 Center Cap
$69.99Check out these new Model-37 Center Caps by Rays (Volk Racing)! They are a new model that will fit TE37 Saga (SL & S-Plus included), TE37 Sonic, and many other models (please inquire if your model is not specified in this list). It's a 2022 model that will give a new, fresh look to your wheels! Please note that some vehicles cannot fit those center caps due to hub clearance. You can verify with us with your wheel model, size, offset and your vehicle (model/year) before ordering. Learn More
-
Jet Stream Reflector Attachments
$149.99Side Reflector Attachment made by Jet Stream for the NC (2006-2015) MX-5 Miata. The piece is made so that you can use a NA or NB reflectors on the NC Rear Bumper. It comes with template for easy installation. Please note that it does NOT include the NA or NB reflectors. Learn More
-
TWS RS 317 17” Wheel
$704.99The RS317 by TWS is the newest design from TANEISYA Wheel Supply in term of forged racing wheels. The 5x114.3 model is available in a nice 17x7.5 to 17x9.5 with various offsets. It's a high quality forged wheel that will last longer than your car and will handle abuse. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size/offset. Learn More
-
SSR GTX-04 17” Wheel
Regular Price: $389.99
Special Price $344.99
The SSR GTX04 uses the same flow-forged technology as other models in the GTX line up from SSR. The 17” GTX04 (5x114.3) are one of the lightest wheels on the market, starting in at only 7.22 kg! The GTX04 is offered in Dark Gunmetal finish and 5x114.3 lug pattern. The 17” diameter is available in a 8"/8.5"/9" width. Comes with an aluminum valve stem and FFT-R decal. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
SSR GTX-02 17” Wheel
Regular Price: $369.99
Special Price $324.99
The SSR GTX02, split five spoke design, uses the same flow-forged technology as other models in the GTX line up from SSR. The 17” GTX02 are one of the lightest wheels on the market, weighing in at only 7 kg! The GTX02 is offered in Dark Silver and Gloss Black finishes and 5x114.3 lug pattern. The 17” diameter is available in 7.0” width with a 3 offsets, +53, +48 and +42. Comes with an aluminum valve stem and FFT-R decal. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
RSE Full Titanium Catalyst Straight Pipe Kit
Regular Price: $1,020.00
Special Price $801.00
Increase the performance of your NC (2006-2015) Roadster while decreasing the weight with the Real Speed Engineering (RSE) Full Titanium Catalyst Straight Pipe Kit. The RSE Titanium Straight Pipe Kit is comprised of the front pipe section, which extends from the header to the rear flange for the muffler section. This exhaust is made from laser-welded titanium, which helps it shed weight, 4.9 kg to be exact! The piping on the RSE Titanium Straight Pipe also sees an increase from 50.8 mm to 60.5 mm. The RSE Straight Pipe comes with all necessary hardware and gaskets. The titanium straight pipe uses an OEM style flange that makes it compatible with the OEM header and rear section.
Learn More
Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.
USA Customers : Enjoy Free Shipping with Gift Card Code RSEUSA !
-
RSE Full Titanium Muffler Kit
$677.99Increase the performance of your NC (2006-2015) Roadster while decreasing the weight with the Real Speed Engineering (RSE) Full Titanium Muffler Kit. The RSE Titanium Muffler Kit is comprised of the rear section from the rear flange to the rear of the vehicle. This exhaust is made from laser-welded titanium, which helps it shed weight, 9.8 kg to be exact! The muffler section features blue gradient finishes on the muffler body and the rolled tip. The tip is slightly larger than stock, increasing to 89.1 mm. The piping on the RSE Titanium Muffler also sees an increase from 50.8 mm to 60.5 mm. The RSE Muffler maintains the factory flange design that makes it compatible with the OEM midpipe or the RSE straight pipe. USA Customers : Enjoy Free Shipping with Gift Card Code RSEUSA ! Learn More
-
Shinkai Plated Wiper Blades
$247.99Increase the exterior appeal of your NA, NB, or NC Roadster (1989-2015) with the Shinkai Plated Wiper Blades. The OE replacement wiper blades feature high-quality plating that is available in silver plating or smoke plating. The Shinkai Wiper Blades are directly compatible with NA and NB Roadsters, for use with the NC chassis you will need to reuse the metal retainers. Allows the customer to use genuine wiper blade rubber. Learn More
-
Shinkai Black Chrome Wiper Arms
$337.99Dress up the exterior of your NC (2006-2015) Miata with the Shinkai Black Chrome Wiper Arms. These high quality plated replacement wiper arms feature a deep smoke black chrome finish and are genuine NC wiper arms that have been refinished. The Shinkai Wiper Arms are compatible with most wiper blades thanks to retaining the J hook design. The wiper arms are also available in a silver chrome finish upon request. Learn More
-
Murakami Terubo Keychain
$49.99A unique keychain from Murakami to commemorate the 30th Anniversary of the NA Mazda MX-5 Miata endorsed by Mazda Motor Company. The Murakami Terubo Keychain is designed to resemble the front end of the NA Miata with a 30th Anniversary silhouette logo helmet. The Terubo designation helps to signify good weather bringing good karma to the enthusiast. Murakami offers the keychain in four different colors, green, blue, yellow and red. Learn More
-
Aotenjo Rectangle Silhouette Key Chain
$34.99A resin keychain with designs for each generation of the Mazda MX-5 Miata from Aotenjo. Aotenjo has brought to market a beautifully crafted rectangle key chain made from aluminum and black acrylic resin. The keychain offers a sleek silhouette design of all generations of the Roadster from NA to ND. The keychain tag comes with hardware for immediate use and measures 25mm long, 47mm wide, and 1.5mm thick. Learn More
-
Aotenjo Face Silhouette Key Chain
$34.99A keychain depicting the front of each generation of Mazda MX-5 Miata from Aotenjo. The Aotenjo Face Type Keychain is a brushed aluminum and black resin keychain designed after the front end design of the NA, NB, NC, and ND chassis. The keychain shows the front end of the respective Roaster with the hardware included for quick use. The key chain is die cut to shape of the vehicle and measures 27L x 37W x 1.5D mm. Learn More
-
Work Meister S1 3PIECE 17” Wheel
$617.99The Work Meister S1 is a 5-spoke 3-pieces wheel with a look that just does not goes out of style. It’s available sizes from 17x7 all the way to 17x13 with various offsets! Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Due to many offset/face type, we will contact you to confirm the wheel offset/face type. Learn More
-
Rays TE37 Saga SL 17” Wheel
$844.99The TE37 Saga SL is Volk Racing improvement over the new Saga model (even lighter!). Available in 17x7.5 to 17x9.5 (5x114.3), it has the same design as the TE37 Saga, but uses techniques unique to Rays to shave some extra weight. They now introduced sizing for NC MX-5 (2006-2015) in 5x114.3 that will either fit under OEM fenders or require body work/fender flares! Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Car Make Corn's Black Fabric (Suede) Racing Seat
$884.99Black fabric (similar to suede) racing seat with red, blue, yellow or silver stitching made by Car Make Corn's. It has punched fabric/suede in the center of the seat to give it a nice racing look. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Please note that some photos show single stitching, but the seats now come with double-stitching. Learn More
-
Enkei Japan PF06 16" Wheel
Regular Price: $484.00
Special Price $327.99
The PF06 the newest of Enkei's 6-spoke design wheel aimed for track compact cars. Available in 5x114.3, it is is available in widths from 8” to an aggressive 8.5”. The design uses Enkei’s advanced techniques and the latest manufacturing methods. It gives a clean and aggressive look to any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Price is for 1 wheel that is BRAND NEW.
Learn More
-
WedsSport SA-27R 17” Wheel
$298.74The SA27R model is a newer double 7-spoke design made by WedsSports . Available in 17x7 & 17x7.5 (5x114.3), it’s made for those who want to run more conservative setups. The wheel is quite light and made to survive racing abuse. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Rays TE37 Saga S-Plus Time Attack 17” Wheel
$844.99The TE37 Saga S-Plus Time Attack is an improvement above the TE37 Saga S-Plus! It comes in 2 cool finishes.
Learn More
Available in 17x7.5 & 17x8 (5x114.3), it has the same design as the TE37 S-Plus, but uses techniques unique to Rays to shave some extra weight.
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference.
The actual wheel look will be different based on its size.
-
Project KICS N2 Gas Valve Caps
$39.99A tire valve cap from Kics Racing Gear for the ALL YEARS Mazda Miata. The Kics N2 Gas Valve Caps are an easy way to alert service technicians that nitrogen, not air is used to inflate your tires. Nitrogen has become popular in recent years since it does not expand and contract with fluctuations in temperature. The Kics Racing Gear N2 Valve Stem Caps feature a warning icon on top and are offered in a number of colors; red, black, blue, silver, and silver plating are all available. Kics offers these valve caps in sets of four. Learn More
-
Project Kics Number Plate Bolts
$54.99A license plate bolt set for added security from Kics Racing Gear for ALL YEARS Mazda Miata. The Kics License Plate Bolts are a four piece exterior dress up hardware designed to secure the license plate with a stainless steel, Torx shape. The Kics License Plate Bolts are offered in a black chrome finish with silver logo treatment on top. All kits come with both the washers and bolts, as well as, the specialty Torx L-Shaped tool. All bolts are 21mm overall height, with 15mm available thread, please check the depth of your license plate before purchasing. Learn More
-
Project Kics Leggdura License Plate Bolts
$64.99A security license plate bolt from Kics Racing Gear to add style and deter theft that will fit on ALL YEARS Mazda Miata. The Kics Leggdura License Plate Bolts use a unique shape to help improve security against theft. The Leggdura Plate Bolts also feature an aluminum knurled finished cap to enhance the exterior look of the vehicle. Kics Leggdura License Plate Bolts are available in four colors, red, blue, gold, and black. Each set comes with 4 aluminum caps, steel bolts, and Leggdura logo emblems. The HEX security lock tool is also included to make for easy installation. Learn More
-
Project Kics Lug Nut Keychain
$39.99A useful key holder from Kics Racing Gear that can stow a spare lug nut. The Kics Lug Nut Keychain uses a threaded adapter to secure a spare lug nut to your keys. The keychain is available in M12x1.25 or M12x1.5 mm thread pitch. The keychain comes with a dummy lug nut in one of four colors with the Kics Racing Gear Logo in a constrasting silver finish. Red, blue, gold, and black colors are all available. The dummy nut does not have any useable threads. Kics Racing Gear offers the key chain with all the needed hardware including a carabineer and clasp. Learn More
-
RUR Blinker Harness
$209.97Blinker wiring harness for the NA (1989-1997), NB (1998-2005) and NC (2006-2015) Mazda MX-5 Miata designed by RUR Japan. The Blinker Harness creates a unique atmosphere to the Roadster. RUR does this by adjusting the blinker from a harsh on/off switch to a soft, fade in/out feature. The updated look of the blinker is done so through an electronic module implemented by RUR that is easily installed and fully reversible. The harness is compatible with both halogen and LED bulbs. Learn More
-
KAL Shift Knob
$124.99Shift knob for the Mazda MX-5 Miata NA, NB, NC, and ND (1989-2016+) from KAL of Japan. The KAL Shift Knob is a piston shaped shift knob that fits all model years of the Mazda Miata to improve shifter feel and create a better gear change experience. The new shift knob is available in brushed aluminum construction not only looks great, but also adds a bit of weight. The KAL shift knob measures 8 cm tall and 4 cm wide at the top of the knob for easier gear changes. Learn More
-
Nielex x Aisin Door Stabilizers
$274.97Handling upgrade from Nielex for the NC and ND Mazda MX-5 Miata (2005-2016+). The Aisin x Nielex Door Stabilizers are a small upgrade with a big change in the handling of the third and fourth generation Miata. The Door Stabilizers fill in the gap between the door and the body of the vehicle to stiffen the chassis aiding in increased stability and steering response. The door stabilizers are an Aisin product that have been modified by Nielex to fix the NC & ND chassis. They were designed to improve the contact of the door with the body creating both a performance upgrade and a luxury feel. The Aisin Door Stabilizers are easily installed using basic hand tools. Learn More
-
Pit Crew Racing Street Muffler
$677.99Replacement muffler made by Pit Crew Racing for the 2006 to 2015 Mazda MX-5. It is the result of a lot of research from the size of the muffler & the interior mesh diameter to bring a beautiful racy sound. The cannonball type exhaust tip (taper) eliminates the muffled sound that you usually find in an open top vehicle. Learn More
-
Car Make Corn’s Original Muffler (Single Tip)
$617.99Car Make Corn's is bringing out their awesome single tip muffler for the NC application (2006-2015)! It was re-released due to high demand and it's a very high quality and subtle exhaust with Corn's usual high quality pitched noise. Learn More
-
SSR GTV04 17” Wheel
Regular Price: $369.99
Special Price $324.99
The GTV04 Wheel made SSR is part of their new GT series. The 17” version in 5x114.3 comes in width from 7 inches wide. It's a very easy fitment that will change the look of the vehicle, making it more aggressive looking. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Sublime Clutch Pedal Extension
$184.97Pedal extension crafted by Sublime Design Japan for ALL YEARS Mazda MX-5 Miatas (NA/NB/NC/ND). The Sublime Clutch Pedal Extension improves driver engagement on the third generation Miata with a simple add on product. The clutch pedal extension is designed to push the pedal closer to the driver, to improve clutch to brake pedal changes and ease of use. The extension is made from a durable plastic and is compatible with the factory rubber pedal cover. The pedal extension is easily installed, but does require the user to supply (1) M4x10 set screw. Learn More
-
Sublime Smart Phone Holder Base
$119.97Interior dress up part from Sublime Design Japan for the 1989-1997 Mazda MX-5 Miata. The Sublime MX-5 Smart Phone Holder Base is a cleverly designed product aimed at creating a solid mounting place for your cell phone holder. The durable plastic base is easily installed to the center console with double sided tape and can accept most phone holders that use double sided tape to attach. Sublime has designed the holder so that excess cordage can be wrapped around the back of the mounting base for a clean, mess free usage. Learn More
-
Project Kics SCM435 Lug Nuts
$147.99Lightweight racing lug nuts made in Japan by Project KICS. They are made using SCM435 (forged chrome molybdenum steel), only weights 47g per nut (!!!) and comes with 1 lock nut per every wheel. It is made to be a nice light weight and cost effective option for those who race their cars and need reliability. Learn More
-
Mazda NC3 Fog Light Covers
$154.99Front Fog Light Covers made by Mazda Japan for the NC3 (2013-2015) MX-5 Miata. These are replacements or upgrades for those who have NC3 without fog lights. Please note that it does not include fog lights (only the plastic cover). Learn More
-
MZ Racing Wide Blue Mirrors
$137.99Wide Blue Mirror Lenses made for NC (2006-2015) MX-5 Miata made by MZ Racing of Japan. Those wide blue mirrors also offer an anti-glare function which is a nice improvement for safety over the factory flat/chrome mirrors. The wide angle is about 20% bigger than factory mirrors and reduce the dead angle spots. Learn More
-
HKS Racing Suction Intake
$424.97Racing Suction intake made by HKS for the 2006-2015 (2.0L) MX-5 Miata. Designed specially for the 2.0L NCEC Roadster, it has a specific tubing in aluminum made to provide with the best possible performance. It can be installed without ECU tuning (or resetting). It provides with a pleasant intake sound under acceleration. It adds about ~2 hp over stock vehicle. Learn More
-
HKS Super Air Filter
$79.97HKS Super Air Filter made by HKS for the 2006-2015 2.0L MX-5 Miata. It's a replacement air filter that will improve flow and keep engine safe from dust. The design of this filter (polyested nonwoven) is better than standard woven fabric and has a long lifespan. Learn More
-
TRUST Airinx GT Intake
$94.97Airinx (Air Inx) GT Air Filter made by TRUST (GReddy) for the 2006-2015 2.0L MX-5 Miata. It's a replacement air filter that will improve flow and keep engine safe from dust. The rubber surround makes it ultra safe against dust coming into the engine. Learn More
-
Advan RG4 17" Wheels
$516.99The Advan RG-4 Wheels are the fourth generation of the RG wheel model and their most aggressive version ever. Available in 17x7.5 to 17x10, these will look perfect on NC applications! Meaning of RG is "Racing & Gymkhana".
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference, actual wheel look may change depending on the size & offset.
Learn More
-
Pivot 52mm GT Gauges
$0.00Meters from Pivot that are compatible with all model years of the Mazda MX-5 Miata (1989-2016+). The Pivot 52mm GT Gauges are a compactly designed gauge perfect for smaller interiors found on the MX-5 Miata. The GT Gauge is available in 52mm diameter and includes a mounting band for easier installation. Pivot offers the black finished gauges in multiple displays, such as oil pressure, oil temp, water temp, voltmeter, boost meter, and tachometer with the majority of these gauges with two backlighting colors, white or green. With a high stepper motor, the gauge accuracy is better than a coil spring style gauge helping you keep track of vital engine parameters more easily. Learn More
-
Zeromotive NC Shift Boot
$54.99Shift boot for the 2006-2015 NC Mazda MX-5 Miata from Zeromotive. The Zeromotive NC Shift Boot is a replacement boot for the manual transmission NC Miata that improves the look and feel of the interior space. The new shift boot installs on the factory stay using the 8 stays on the shifter trim. Zeromotive offers the new shift boot in two finishes, synthetic leather or genuine leather with 10 different stitching colors available to match any interior. Stitching colors include red, black, white, gray, blue, green, yellow, orange, camel, and purple. Learn More
-
Zeromotive NC Handbrake Boot
$49.99Hand brake boot for the third generation Mazda MX-5 Miata (2006-2015) from Zeromotive. The Zeromotive NC Hand Brake Boot is a replacement boot for the NC Roadster that dresses up the interior space with a fresh new look. The new boot installs in the same manner as the factory boot reusing the stay on the ebrake handle. The hand brake boot is compatible with both early and late model NC models and fits automatic and manual transmission vehicles. Zeromotive offers the ebrake boot in two finishes, synthetic leather or genuine leather with 10 stitch colors available to match any interior. Stitching colors include red, black, white, gray, blue, green, yellow, orange, camel, and purple. Learn More
-
Enkei Japan PF06 17" Wheel
Regular Price: $544.50
Special Price $367.99
The PF06 is a revival of Enkei's 6-spoke wheel aimed for track compact cars. Available in 17" (5x114.3), it is is available in widths from 7” to an aggressive 9.5”. The design uses Enkei’s advanced techniques and the latest manufacturing methods. It gives a clean and aggressive look to any vehicle. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Price is for 1 wheel that is BRAND NEW. Learn More
-
NUE Fender Flares
$484.97Wide body fenders from NUE made specifically for the 2006-2008 NC Mazda MX-5 Miata. The NC Miata Fender Flares widens the vehicle track increasing vehicle stability and aiding in fitting larger wheels and tires. In fact, NUE’s shop car runs 19x9.5 -10 in the front and 19x10.5 -17 thanks to the added 60-70mm and 80-90mm added width to the front and rear respectively. NUE ties the FRP rear fenders into the lower side sills with lower side spats, making for a smooth transition even on a stock NC. Whether your goals are stance or track focused, the NUE Fender Flares will compliment any build. Learn More
-
Defi Seat Covers
Regular Price: $574.99
Special Price $399.99
Seat covers from Defi for the early model NC Mazda MX-5 Miata (2006-2008). The Genuine Seat Covers from Defi offer an upgrade to the interior room that feels both luxurious and sporty. Available in three stylish color options – solid black, two-tone black and ivory, and two-tone ivory and black – the Defi Sport Seat Covers offer a customizable touch to match your personal style. The center of the seat is meticulously perforated, adding a subtle yet elegant detail to the overall design. These seat covers seamlessly integrate with the original seats, ensuring a perfect fit and retaining the authentic feel of your Mazda MX-5 Miata. Note that the Defi Sport Seat Covers are not compatible with Recaro seats or special edition leather seats. Crafted with precision, the seats feature a double stitch for added strength and luxury, enhancing both durability and visual appeal. The BioPVC leather used in these seat covers combines suppleness and volume, providing a soft and luxurious feel for an enjoyable driving experience. Learn More
-
ZOOM Shift Boot
$94.99Shift boot made by Zoom for the manual transmission 2006-2015 NC1/NC2/NC3 MX-5 Miata. Available in both Real or Synthetic Leather. Subtle and stylish touch to the interior. Learn More
-
Aotenjo Acrylic Mirror Key Chain
$34.99Mirror-finish keychain showing the front of each generation of Mazda MX-5 Miata from Aotenjo. The Aotenjo Acrylic Mirror Keychain is a mirror-finish key chain designed after the front end design of the NA, NB, NC, and ND chassis. The keychain shows the front end of the respective Roaster with the hardware included for quick use. The key chain is die cut to shape of the vehicle and looks awesome! Learn More
-
Daikei Lever Extension
$44.99A convenient stalk extender from Daikei that is compatible with all model years of the Mazda MX-5 Miata. The Daikei Turn Signal Lever is a helpful device that makes accessing the turn signal stalk easier when steering wheel boss hub is fitted. The Signal Stalk Extender is compatible with 18 to 28 mm diameter stalks and has a workable range of 30 to 100 mm of extension. Finished in a black anodizing, it will be stealthy while remaining functional. The Daikei Signal Lever comes with all that is needed to install including spacer for larger or ovular stalks. This is made to help operate the turn signals after installing a deep dish (Deep Corn) steering wheel. Check out our blog post on how to make it fit a left hand drive (LHD) vehicle. Learn More
-
Rays Volk Racing CE28N Plus 17" Wheel
$814.99Rays (Volk Racing) now offers the CE28N-Plus, its lightest wheel that is comparable to the TE37. It has the goal of having the lightest possible weight. Available in 17x7.5, 17x8, 17x8.5, 17x9 and 17x9.5 (5x114.3), there will definitely be one that'll suit your style. This evolution of the legendary CE28N is aimed at improving its strength due to vehicles being heavier and heavier nowadays, however, it will not sacrifice the light weight.
Learn More
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size.
-
Nardi Ring for Deep Corn Steering Wheel
$74.99Aluminum Ring made by Nardi that is compatible with the Deep Corn Steering Wheels. This ring is fixed using adhesive for easy installation. Learn More
-
Nardi Deep Corn 350MM Custom (Black Stitching)
Regular Price: $449.99
Special Price $399.99
Genuine Nardi (Rally) Steering Wheel (350mm) imported from Italy with CUSTOM Black Stitching (not standard) that is available in VERY LIMITED QUANTITIES. It's a beautiful product that will stand out from the standard Deep Corn models! Learn More
-
Nardi Deep Corn 330MM Custom (Black Stitching)
Regular Price: $449.99
Special Price $399.99
Genuine Nardi Deep Corn Steering Wheel (330mm diameter) imported from Italy with CUSTOM Black Stitching (not standard) that is available in VERY LIMITED QUANTITIES. It's a beautiful product that will stand out from the standard Rally models! Learn More
-
AutoExe Sports Clutch Set
$499.99Sports clutch set for the 2006-2015 NC MX-5 made by AutoExe. Built with an advanced organic material reinforced with high-strength fibers and copper wire, it improves fade resistance, rotational strength, and friction control. Paired with a cast iron pressure plate and reinforced diaphragm springs, it boosts clamping force by around 20%, ensuring reliable power transmission even for high-output engines. Ideal for street use, the clutch offers smooth stop-and-go handling and half-clutch control, making it perfect for both spirited drives and everyday commutes. Learn More
-
NA Motors Flat Horn Button Ver5 ALL BLACK
$124.99ALL BLACK horn button from NA Motors for all years of Mazda MX-5 Miata using a MOMO or Nardi steering wheel. The Flat Horn Button from NA Motors is small interior accessory compatible with Nardi or MOMO steering wheels that gives the illusion of a horn delete. It is their most subtle design so far with anodized black aluminum and an engraved horn button icon. The internal spring has been changed from rubber to metal to improve the feel over other models. Comes with 2 standard flat terminals, 250-type male. Learn More
-
Autoexe Ball Shape Shift Knob
Regular Price: $124.99
Special Price $114.99
Spherical shape shift knob made by AUTOEXE to give the vehicle a nice feel while shifting. Now made from Nappa Leather! It is height adjustable to provide with the best feeling possible. It feels great in hand and looks pretty awesome. Black anodized aluminum with Autoexe logo engraved on top of the shifter sure makes it a high quality item. Learn More
-
Rays Volk Racing CE28N Plus SL 17" Wheel
$889.99We thought the CE28N-Plus was the ultimate CE28N variation? No more! The SL version saves an average of 400g per wheel versus the standard CE28N-Plus. Available in 17x7.5, 17x8, 17x8.5, 17x9 and 17x9.5 sizes (5x114.3), there will definitely be one that'll suit your style. This lighter weight version of the CE28N-Plus is aimed for those really serious about performance.
Learn More
Price is for 1 wheel that is BRAND NEW.
Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size.
-
Nardi Deep Corn 330MM Italian Colors (3 sectors) Special Edition
$347.87Nardi Deep Corn Steering Wheel with 3 sectors stitching colors representing Italy : White, Red & Green. 330MM size, black perforated leather with black anodized spokes & red, white & green stitching (3 sectors). Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Deep Corn 350MM Italian Colors (3 sectors) Special Edition
Regular Price: $347.87
Special Price $310.99
Deep Corn Steering Wheel by Nardi with 3 sectors stitching colors representing Italy : White, Red & Green. 350MM size, black perforated leather with black anodized spokes & red, white & green stitching (3 sectors). Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Nardi Classico Steering Wheel 365MM Black Leather With Satin Spokes
Regular Price: $499.99
Special Price $439.99
Classico Steering Wheel made by Nardi with 365mm diameter, satin silver spokes & rare leather ring! Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Personal Drop Leather Shift Knob
$149.99Personal Drop Shift Knob made of Black Leather with Black Stitching. This is the LAST unit available, get it while it's available! Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
Out of stock
-
Personal Drop Aluminum Shift Knob
$149.99Personal Drop Shift Knob made of Glossy Aluminum. This is the LAST unit available, get it while it's available! Disclaimer : This product by Nardi is a ‘universal’ item that utilizes set screws for installation. It is recommended to use the supplied rubber rings and potentially some threadlocker (loc-tite) on the set screws to secure them in place. The bottom of the shift knob has a black plastic base that covers the set screws. Learn More
-
HPI Racing 4-Point Harness - Sumo Special Edition
Regular Price: $499.99
Special Price $399.99
This is the most rare edition of the HPI Harnesses : The Sumo Edition. Their racing harnesses are FIA approved, making them legal is most racing series. Not only are they amongst some of the best brands in the world, but this is super unique. Please note some photos show the 6-Point harness (we are selling the 4-Point version). Please note that installation will require a harness bar (also sold at REV9 Autosport). Learn More
-
Car Make Corn's Light Camel Leather Seats
$984.99Beautiful Light Camel (tan variation) synthetic leather racing seats made by Car Make Corn's. It has a very classy look. Available with regular (horizontal) stripes, it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
Car Make Corn's White Leather Seats
$984.99White color synthetic leather racing seats made by Car Make Corn's. It has a very classy look. Available with regular (horizontal) stripes, it'll sure enhance the look of your interior. Replaces OEM seat for a more aggressive version that keeps you in place when taking a sharp turn. It sits about 20mm lower than OEM seats. Learn More
-
WedsSport SA-01R 17” Wheel
Regular Price: $379.50
Special Price $312.50
The SA01R made by WedsSport is the successor of the SA-10R Wheel. Available in 17x7 & 17x7.5 (5x114.3), this will easily fit your NC (2006-2015) MX-5 Miata. Choose from 4 finishes : WBC (Worth Black Clear), EJ-BRONZE II, PSB (Platinum Silver Black) & BLC II (Blue Light Chrome II). This 10-spoke wheel has a nice and classic design that will be future-proof. It has a three dimensional effect with the step on top of the spokes, giving it a bold, yet delicate line. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-62R 17” Wheel
Regular Price: $379.50
Special Price $312.50
The SA62R made by WedsSport is the first 6-split spoke wheel from their SA (Street Advantage) series. Available in 17x7 & 17x7.5 (5x114.3), this will easily fit your NC (2006-2015) MX-5 Miata. Choose from 4 finishes : WBC (Worth Black Clear), EJ-BRONZE II, PSB (Platinum Silver Black) & BLC II (Blue Light Chrome II). The spokes reaching the end of the rim give this wheel a very special and aggressive look, while remaining delicate. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-75R 17” Wheel
Regular Price: $379.50
Special Price $312.50
The SA75R is a 7-spoke wheel made by WedsSport and also their strongest model in the SA (Street Advantage) series. Available in 17x7 & 17x7.5 (5x114.3), this will easily fit your NC (2006-2015) MX-5 Miata. Choose from 4 finishes : WBC (Worth Black Clear), EJ-BRONZE II, HBCII (Hyper Black Clear II) & BLC II (Blue Light Chrome II). They wanted to have the thinnest spokes possible on this design and pushed the limits again. The AMF construction brings the cost down while having a similar strength to a forged wheel. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
WedsSport SA-99R 17” Wheel
Regular Price: $379.50
Special Price $312.50
The SA99R is a 9-spoke wheel made by WedsSport, part of their SA (Street Advantage) series. Available in 17x7 & 17x7.5 (5x114.3), this will easily fit your NC (2006-2015) MX-5 Miata. Available in 4 finishes : WBC (Worth Black Clear), EJ-BRONZE, PSB (Platinum Silver Black) & BLC II (Blue Light Chrome II). This is a wheel that will turn heads to its very aggressive looks. The AMF construction brings the cost down while having a similar strength to a forged wheel. Price is for 1 wheel that is BRAND NEW. Please note that the pictures of wheels alone are only for color reference. The actual wheel look will be different based on its size. Learn More
-
Nielex Accelerator Pedal (FREE SHIPPING TO USA)
Regular Price: $124.99
Special Price $104.99
Product from Japan made of high quality aluminum. Made by Nielex.Please be advised that this closeout item can only be shipped within the lower 48 states of the United States.
If an order is submitted with a shipping address outside of the lower 48 states, we will regretfully have to cancel the order and process a refund. We recognize the inconvenience this may pose and appreciate your understanding, as these products are stored in a separate warehouse without access to our negotiated international shipping rates.
For customers residing outside the lower 48 states who are interested in this product, we recommend exploring the same item on this page, which offers worldwide shipping options: Nielex Accelerator Pedal .
Learn More
-
Nardi Classico Steering Wheel 360MM Black Suede With Black Spokes
Regular Price: $369.99
Special Price $349.99
Genuine Nardi Steering Wheel imported from Italy. Please note that it does not come with any steering wheel bolts. They however are included in our Daikei Boss Hub Kit! Learn More
-
Works Bell Rapfix GTC Tilt-Up System
Regular Price: $499.99
Special Price $434.99
Genuine Steering Wheel Mounting Tilt/Pop-Up Release System made by Works Bell of Japan! It is made to make it easier to access tight driver's seats spaces. It is built to be 100% compatible with their Short Boss Hub Kit, but will also work with Daikei Boss Hub Kit! Not only is it useful for getting in and out of the vehicle, but also it'll help have access to the pedal area of the vehicle when doing maintenance. Learn More
-
Mazda NC3 Fog Light Delete Trims
$174.99Fog Light Covers (Delete Kit) Trims made by Mazda Japan for the NC3 (2013-2015) MX-5 Miata. These are replacements or upgrades for those don't want fog lights. Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
