You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Garage Vary
-
Garage Vary Rear Diffuser
$549.99Product from JAPAN made from high quality FRP or Carbon Fiber. Gives a subtle but noticeable change to the look of the car by making it more aggressive. DISCONTINUED AND NO LONGER AVAILABLE. Learn More
Out of stock
-
Garage Vary Headlight Air Intake Lid
Regular Price: $229.99
Special Price $184.99
Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Front Lip
Regular Price: $299.99
Special Price $249.99
Give your NA Miata (1989-1997) a sporty and modern look with the Garage Vary Front Spoiler. This authentic air dam (lip) was designed to match your car’s flowing lines and to improve stability at high speed. It is made of tough urethane that promises durability and flexibility. Easy to install in black with no incisions needed, or ready to paint once it fits perfectly. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Eye Lids
$174.99Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Eye Lids
$134.99Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Before painting, please make sure the product fits the car properly. Please note that if you have a NC3, you can get the NC2 model and it will fit with a small gap. Learn More
-
Garage Vary Radiator Cooling Panel
$144.99Product from JAPAN made from high quality and light CARBON FIBER. Keeps the cold air at the radiator instead of letting it escape over the top. Learn More
-
-
Garage Vary Front Lip
Regular Price: $299.99
Special Price $249.99
Authentic front lip made by Garage Vary for the NB1 (1998-2000) and NB2 (2001-2005) Miata. High quality urethane lip. Gives a nice change to the look of the car by making it more aggressive. It will also make the car more stable at high speed. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Carbon Fiber Door Panels
$334.99Product made by Garage Vary. Simple, yet, effective. These CF door panels will add a great look to your interior. The installation is very using sturdy automotive 3M double-sided tape. Learn More
-
Garage Vary Trunk
$549.99Product made by Garage Vary. Sleek and fit. This Garage Vary NB trunk is lightweight, and will add a great look to your car. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Rear Spoiler Type-1
$299.99Product made by Garage Vary. Want a nice subtle change to the rear of your car? The Garage Vary Type-1 rear spoiler is the way to go. Nice and sleek. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Rear Spoiler Type-2
Regular Price: $274.99
Special Price $254.99
Product made by Garage Vary. Want a nice subtle change to the rear of your car? The Garage Vary Type-2 rear spoiler is the way to go. Nice and sleek. Please note that debadging is necessary to fit this spoiler. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Hardtop Rain Rails
$144.99Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the hardtop more functional when it rains or after a shower. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Front Canards
Regular Price: $174.99
Special Price $149.99
Bumper Canards made by Garage Vary for the 1989 to 1997 NA MX-5 Miata. Available in 2 sizes and made of FRP or Carbon Fiber, you'll be able to select the level of aggressiveness & downforce to your front bumper. Garage Vary's front canards flows well with the OEM bumper, giving downforce and aggressive look. Looks great with flares and/or sideskirts. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Front Garnish
Regular Price: $199.99
Special Price $174.99
Product made by Garage Vary. Garage Vary's front garnish flows well with the OEM front lip, helps hide low offset wheels/tires. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Rear Garnish
$149.99Product made by Garage Vary. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Front Air Deflector
$449.99Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more stable at high speed. Before painting, please make sure the product fits the car properly.
Please note that it will only work with a Garage Vary Front Lip.
Learn More
-
Garage Vary Side Air Deflector
$349.99Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more aerodynamic. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary 1006 Trunk
Regular Price: $799.99
Special Price $699.99
Replica of the trunk from the famous M2-1006 Roadster which was availably in very limited quantities. Made in Japan by Garage Vary, this trunk has a fantastic look and fits perfectly. Before painting, please make sure the product fits the car properly. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Carbon Fiber Cowl Cover
$274.99Product from JAPAN made by Garage Vary from high quality and light CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Aero Mirrors
$524.99Product from Japan made by Garage Vary. Made of high quality FRP. The width of the mirror glass is 130mm. Carbon Fiber version has been discontinued and no longer available. Learn More
-
Garage Vary Front Lip
$349.99 As low as: $299.99Product made by Garage Vary. Very aggressive front lip that gives additional downforce to NC vehicles. Learn More
-
Garage Vary Aero Mirrors
$499.99Product from Japan made by Garage Vary. Made of high quality FRP or Carbon Fiber. Learn More
-
Garage Vary Headlight Air Intake Lid
$174.99Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Headlight Air Intake Cover
$174.99Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Front Bumper Grille
$374.99Product from JAPAN made by Garage Vary. Changes the front end of the vehicle. Makes the bumper look more aggressive. Learn More
-
Garage Vary GT Wing
$624.99Product made by Garage Vary. Available in various heights and width, this spoiler is made for the racers. A customer has to assemble side wings and stays by himself. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Aero Hood Type-1
$849.99Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Aero Hood
$849.99Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Vented Hood
$749.99Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Hardtop Turbulator
$399.99Product made by Garage Vary from high quality FRP to create turbulence over the hardtop and increase downforce (used as vortex generators). It is made to bring “better airflow” to cars with rear spoilers. White NB only has the top part where the Black hardtop shows the 3 pieces kit. Learn More
-
Garage Vary Glide Lip Spoiler
$799.99Front Lip made by Garage Vary that was track tested and made to improve aerodynamics of the NC3 to the maximum. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Garage Vary Racing GT Wing
$699.99GT Wing made by Garage Vary for circuit use on their NC demo car. The wing itself is made of FRP and the end-plates (sides) are made of Carbon Fiber. It’s made to improve downforce of the MX5 by a lot. Learn More
-
Garage Vary Side Skirts
$749.99Side Skirt made by Garage Vary for all generations NC MX-5 (2006-2015). It’s a nice addition that will add an aggressive touch to the side of the vehicle and improve aerodynamics at the same time. Learn More
-
Garage Vary Rear Diffuser
$499.99Rear diffuser made by Garage Vary. It's available with 3 variations : diffuser only, diffuser + center flap & diffuser + slit spoiler. It helps improve downforce. Cutting to the bumper is required to install this part. Learn More
-
Garage Vary NC Hardtop (Fastback)
$2,999.99This is Garage Vary's original hardtop design for NC chassis Roadster. It's a fast back that will allow the use of the trunk, but will also improve the look of the vehicle. You can buy the hardtop only (including rear & side windows) or with all necessary hardware. THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION (EXCEPT TO USA ADDRESSES). WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING. Learn More
Out of stock
-
Garage Vary NB Hardtop (Fastback)
$2,999.99Original Hardtop made by Garage Vary for NB chassis MX-5 Miata. It's a fast back that will allow the use of the trunk, but will also improve the look of the vehicle. You can buy the hardtop only (including rear & side windows) or with all necessary hardware. THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION (EXCEPT TO USA ADDRESSES). WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING. Learn More
Out of stock
-
Garage Vary NA Hardtop (Fastback)
$2,999.99Fastback Hardtop made and designed by Garage Vary for NA chassis MX-5. It's a fast back that will allow the use of the trunk, but will also improve the look of the vehicle. You can buy the hardtop only (including rear & side windows) or with all necessary hardware. THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION (EXCEPT TO USA ADDRESSES). WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING. Learn More
Out of stock
-
Garage Vary Front Lip Type-1
$499.99The Type-1 Front Lip is Garage Vary’s newest design for the ND (2016+) MX-5 Miata. It’s made of flexible urethane so it is made to last for very long and handle being hit on the ground while still keeping price low. Color is flat black and can be painted, but is not necessary. Learn More
-
Garage Vary Rear Spoiler
$449.99Rear trunk spoiler made by Garage Vary for the ND (2016+) MX-5 Miata. It’s available in both FRP and Carbon Fiber (plain & twill) and will improve the look of the car! It’s installed using 3M double-sided tape and does not require drilling to the trunk. Learn More
-
Garage Vary Tail Lights Covers
$299.99Tail lamps covers made by Garage Vary to bring a very neat, cut look to the rear end of the Mazda ND (2016+) Roadster. It's based on their Nostalgic Tail Lights available for NA and NB and brings a very clean look to the rear-end of the vehicle. Perfect fit is guaranteed and it allows turn signal light to pass through the side holes.
Learn More
-
Garage Vary Front Lip Type-2
$549.99The Type-2 Front Spoiler is Garage Vary’s newest design for the ND (2016+) MX-5 Miata. It’s available in both FRP and Carbon Fiber (plain & twill) and will improve the look of the car! Color is gloss black or carbon fiber and can be painted, but is not necessary. Learn More
-
Garage Vary Carbon Rear Garnish
$314.99Rear Garnish for the 2016+ ND Miata made by Garage Vary out of Carbon Fiber. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires. Learn More
-
Garage Vary DIY Tail Lights
$649.99The GV Do-It-Yourself Nostalgic Tail Lights for NA (1989-1997) MX-5 are the solution to the now discontinued Mazda Porter Tail Lights (that came with the original Garage Vary Tail Lights Kit). It requires some wiring and assembly, but it’s nothing too difficult that a non-mechanic can do by itself. The kit keeps the same exterior look as the original kit, but requires some DIY work to install it. Instructions are available here.
Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Side Steps
$549.99Side skirts made in Japan by Garage Vary for the ND (2016+) MX-5 Miata. The curved look at the end of it makes it a very unique piece and will flow well with the aggressive look of the fourth generation MX-5! Learn More
-
Garage Vary 1006 Hood
$949.99Replica of the bonnet from the ultra-rare M2-1006 Roadster which was available in very limited quantities. Made in Japan by Garage Vary, this hood has a fantastic look and also increase clearance for engine swaps.Before painting, please make sure the product fits the car properly.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Glide Front Lip (Type-3)
$574.99The Type-3 Front Lip Spoiler is Garage Vary’s most advanced design for the ND (2016+) MX-5 Miata front downforce system. It’s available high quality FRP and will improve the look of the car as well as provide great downforce due to its integrated canards! Please note that pictured lip is FRP & Carbon Fiber (Prototype) and the shipped part will NOT have Carbon Fiber. Learn More
-
Garage Vary Glide Front Spoiler
$799.99Front Lip Spoiler made by Garage Vary made to improve aerodynamics of the NC1 to the maximum. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Garage Vary Glide Air Dam
$749.99Front Lip made by Garage Vary to improve aerodynamics of the NC2 at the best possibe level. It comes with an integrated canard to give the most downforce possible to the vehicle. Learn More
-
Garage Vary Vented Hood
$1,349.99Racing bonnet (hood) made for the 2016+ ND MX-5 Miata. Original design made by Garage Vary with ventilation to extract heat in the engine bay. It’s available in both FRP and Carbon Fiber finish. Please note that Garage Vary recommends to remove the 2 airbag units in the engine bay when running this hood during racing to ensure it will not be destroyed in case of a front impact.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Vented Fenders
$1,349.99Front fenders made by Garage Vary for the 2016+ ND MX-5 Miata. They provide small extra clearance (+3mm), but they are mainly made to provide extra venting and being light weight. Another benefit is that they don’t require to be rolled. Learn More
-
Garage Vary Glide Front Lip
$699.99The Glide Front Lip Spoiler (Air Dam) is Garage Vary’s most advanced downforce design for the NA (1989-1997) MX-5 Miata. It's based on their race-winning ND design. It’s available high quality FRP and will improve the look of the car as well as provide great downforce due to its integrated canards! Sorry for the bad pictures, better pictures will come later. Still, it shows the production version of the front lip. Learn More
-
Garage Vary Glide Front Lip
$774.99Garage Vary’s Glide Front Lip (with integrated canards) is their most advanced downforce design for the NB2 (2001-2005) MX-5 Miata. It's based on their race-winning ND design. It’s available high quality FRP and will improve the look of the car as well as provide great downforce due to its integrated canards! Sorry for the bad pictures, better pictures will come later. Still, it shows the production version of the front lip. Learn More
-
Garage Vary Restoration Rocker Panel
Regular Price: $334.99
Special Price $314.99
Replacement bottom side sill (rocker panels) for the NB 1998 to 2005 Mazda Miata. These are used to replace the rusty panels with brand new and perfectly shaped fiberglass (FRP) ones. It will require cutting of the OEM rocker panels as well as filler to make sure it perfectly flows in. Learn More
-
Garage Vary Front Aero Fenders
$899.99Replacement Front Fender by Garage Vary for the NB Miata (1998-2005) that improves aerodynamics as well as wheel clearance. It has been developed to improve downforce on the vehicle and give a more aggressive look to the vehicle. Please note that pictures show vehicles with side skirts installed. Also, it does not come with the top triangle piece shown on the white NB pictures. The fender has the same shape as OEM fender at the bottom area so you can install aftermarket side skirts. Learn More
-
Garage Vary Type-S Ducktail Spoiler
$599.99Rear spoiler made by Garage Vary for the non-PRHT NC MX-5 Miatas (2006-2015). It’s made of 3 pieces so the trunk weight is not affected so much and provides a nice, wide and aggressive look to the back of the vehicle. Please note that the picture shows GT Wing mounts on the trunk, these are not included. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary NC3 Front Spoiler
$549.99Front lip made by Garage Vary for the NC3 (2013-2015) MX-5 Miata to improve looks and make the bumper look lower. It flows very well with the lines of the vehicle and gives a nice and bold front look. It’s also available with an optional front splitter. Learn More
-
Garage Vary NC3 Front Canards
$174.99Front Bumper Canards made by Garage Vary from high quality FRP or Carbon Fiber for the NC3 (20012-2015) MX-5 Miata. It’ll help improve downforce on the front of the vehicle and improve cornering speed during circuit racing. Learn More
-
Garage Vary Type-N Side Skirts
$474.99Side steps made by Garage Vary to improve the aerodynamics of the NB (1998-2005) Miata. It’s their most used side skirts for all type of racing in Japan. It follows the line of the car very nicely and give a much more aggressive look. Learn More
-
Garage Vary Meter Gauge Hood
$159.99Gauge hood cover with integrated spot for a 52mm diameter meter. This will keep the important information from the meter in a spot that's easy to monitor during driving and racing. Please note that no meter is included with the gauge hood cover. Learn More
-
Garage Vary Emblem Duct
$349.99Emblem Ram Air Intake made by Garage Vary for the 2016+ ND MX-5 Miata. It’s made to provide extra airflow to the intake and a small power gain at the same time by directing cold air directly to the intake. You can read this review for technical gains from this item : Garage Vary Emblem Intake Shows Power Gains! Learn More
-
Garage Vary Race GT Wing
$949.99GT Wing designed by Garage Vary for the 2016+ ND MX-5 to improve lap times during Japan’s Roadster Cup (N-Zero Class) which only allows aerodynamics and suspension modification (no engine upgrades allowed). This GT Wing mounts on the trunk but also overlaps on the quarter panel because it’s more rigid than the flimsy OEM aluminum trunk. The position of the mounts also allows the use of trunk without any problem. It has been tested a lot at Fuji Speedway with constant improvements when using the trunk versus not using it.
This GT Wing needs to be used with a Short Antenna (or no antenna) as the OEM antenna will be in the way. Learn More
-
Garage Vary Nostalgic Tail Lights Panel
$449.99The Garage Vary Nostalgic Tail Lamp Panel is made for NA (1989-1997) MX-5 Miata. This is a brand new, made in FRP, product from Garage Vary in Japan. This product DOES NOT include any tail lamps, it is for the panel. You will need to source the tail lights & back lamp by yourself (sold optionally). If you want a complete kit, please look for the Garage Vary DIY Tail Light Kit or the GV x REV9 LED Tail Light Kit. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Triple Meter Holder
$149.99Meter (gauges) holder made by Garage Vary to fit 52mm diameter gauges on the NB (1998-2005) dashboard. This will keep the important information from the meter in a spot that's easy to monitor during driving and racing. Please note that no meter is included. Learn More
-
Garage Vary Restoration Rocker Panels
Regular Price: $334.99
Special Price $314.99
Replacement side sill (rocker panels) for the NA 1989 to 1997 Mazda Miata. These are used to replace the rusty panels with brand new and perfectly shaped fiberglass (FRP) ones. It will require cutting of the OEM rocker panels as well as filler to make sure it perfectly flows in. Learn More
-
Garage Vary RF Roof Spoiler
Regular Price: $299.99
Special Price $274.99
Roof spoiler made by Garage Vary for the ND RF (2016+) MX5. It'll provide that little aggressive touch that's missing on the roof line of the ND RF! It installs easily using 3M double-sided tape and will give your car a subtle, but nice change. Learn More
-
Garage Vary Ducktail Spoiler
$349.99Duckbill spoiler made by Garage Vary for the 2016+ ND MX-5 made of Urethane. It installs using 3M double-sided tape and will give a very nice and aggressive look to the back of your Roadster! Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Low Trunk Lip
$249.99Rear lip spoiler for the trunk made by Garage Vary. Want a nice subtle change to the rear of your car? It looks nice and sleek. Before painting, please make sure the product fits the car properly. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Gauge Pods
$174.99Gauge (meters) holder made by Garage Vary to fit 52mm diameter gauges on the NC (06-15) dashboard. This will keep the important information from the meter in a spot that's easy to monitor during driving and racing. Please note that no meter is included. Learn More
-
Garage Vary Emotional GT Wing
$699.99The Emotional GT Wing is a special wing designed by Garage Vary only for the ND MX-5 Miata (2016+). It will fit both the Soft Top & RF MX-5s. It’s made to follow the lines of the trunk and rear bumper nicely while giving a super aggressive look to the back of the vehicle, without going over the top. Please note that the "flame shape" end plates are no longer available. Learn More
-
Garage Vary Meter Gauge Hood
$314.99-Easy to install -Made of high quality FRP or Carbon Fiber -Fits a 52mm diameter meter -Only available for Right Hand Drive (RHD) -Only available for ND (2016+) Miatas Learn More
-
Garage Vary Meter Hood
$184.99Gauge hood with integrated spot for a 52mm diameter meter made for the NA (1989-1997) MX-5 Miata. This will keep the important information from the meter in a spot that's easy to monitor during driving and racing. Please note that no meter is included with the gauge hood cover. Also, photo shows the FRP meter hood that the cusotmer painted in flat black. Learn More
-
Garage Vary Downforce Underpanel
$349.99Concave shape under panel made by Garage Vary to improve down force on the ND (2016+) MX-5 Miata. It will make the car more stable at high speed but also moves the air to the center of the radiator to create a better cooling efficiency and more stable water temperature. Learn More
-
Garage Vary Type-1 Front Bumper
$899.99Replacement Front Bumper made by Garage Vary for the NB1 (1998-2000) and NB2 (2001-2005) MX-5 Miata. It's made of high quality fiberglass and will give the front of the car a much more aggressive look while improving the aerodynamics as well. The lights shown on the front bumper are actually the OEM ones that are relocated (they are not included and if you don't have them, you will either need to find some or leave the holes empty).THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Rear Air Duct
$249.99Rear air vent by Garage Vary, one of the top companies in the current F.R.P. and carbon body parts market. Made specifically for the ND (2016+) Mazda Miata/MX-5, these ducts allows for more airflow underneath the car as well as allowing the turbulent air to exit out of the wheel wells. This causes less drag on the Miata during hard driving and also has the benefit of helping the brakes components cool down. The kits comes in a set of two for the left and right side and gives the Miata a more aggressive look. Learn More
-
Garage Vary Rear Garnish
$139.99Rear Fender/Bumper Garnish for the 2006 to 2015 MX-5 Miata made by Garage Vary. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires. Learn More
-
Garage Vary Ram Air Duct
$199.99Ram air intake (duct) kit for the NC MX-5 (2006-2015) Miata made by Garage Vary. By forcing air to the OEM intake, the intake is able to make more power and increase throttle response. This will fit the OEM front bumper and will be hidden once the bumper is installed. Learn More
-
Garage Vary Carbon Scuff Plates
$209.99Carbon Fiber Door Scuff Plates (Side Sills) made by Garage Vary for the NB (1998 to 2005) MX-5 Miata. Those will replace your OEM ones for some nice Carbon Fiber finish. Learn More
-
Garage Vary Type-N Front Bumper
$899.99Type-N (designed for N-Zero Racing Class in Japan) Front Bumper made by Garage Vary for the NB1 (1998-2000) and NB2 (2001-2005) MX-5 Miata. It's made of high quality fiberglass and will give the front of the car a much more aggressive look while improving the aerodynamics by having integrated front canards.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Ducktail Spoiler
$299.99Low profile duck tail (duckbill) trunk spoiler made for the 1989 to 1997 NA MX-5 Miata by famous brand Garage Vary. It's made of high quality Urethane and installs easily onto the OEM trunk without any gap (perfect fit). Learn More
-
Garage Vary Side Skirts Type-TS
$514.99Side steps made by Garage Vary to give a very aggressive side look to the NA (1989-1997) MX-5 Miata. It'll make the side look lower as well as improve aerodynamics of the vehicle. It has a unique floating look that will sure make heads turn! Learn More
-
Garage Vary T-1 Side Skirt
$649.99Type-1 Side Steps made by Garage Vary for NB (1998 - 2005) Mazda Miata/MX-5. Made from very durable and flexible fiber reinforced plastic (FRP), these side skirts will withstand the harsh driving conditions of even the most rough city streets. Garage Vary pride themselves with fitment and aero and these side skirts are no exception. The rear vents allow for airflow to pass through the sides of the car and cool off the rear wheel wells. They look great on the street and are functional on the track! Learn More
-
Garage Vary Intake Duct
$299.99Front Bumper Intake Duct Kit for the NC3 MX-5 (2013-2015) Miata made by Garage Vary. By forcing air to the OEM intake, the intake is able to make more power and increase throttle response. This will fit only on the NC3 models (last generation NC) with OEM bumpers. Learn More
-
Garage Vary Rear Diffuser Type-1
$599.99Stylish rear under spoiler made by Garage Vary for the 2016+ ND MX-5 Miata. This rear diffuser looks fantastic and will work with any muffler setup that fits in OEM hole. Available in Carbon Fiber or FRP. Installation is done with double-sided tape and requires drilling at 6 points underneath the bumper (holes cannot be seen unless if car is on a lift). Learn More
-
Garage Vary Rear Diffuser T-2
$699.99Aggressive rear diffuser (Type-2) made by Garage Vary for the 2016+ ND MX-5 Miata. This rear under spoiler looks awesome and will work with any muffler setup that fits in OEM hole. Available in FRP only. Please note that cutting in to your OEM bumper is required to install this under spoiler. Learn More
-
Garage Vary Triple Meter Holder
$144.99Gauge Holder (3 meters) made by Garage Vary for the NA (1989-1997) Miata. It installs on the dashboard using 3M double-sided tape and provides space for 3 extra gauges so you can monitor your vehicle during racing. Please note that no meter is included. Learn More
-
Garage Vary Rear Wing
$749.99Rear Spoiler (Wing) made by Garage Vary for the 1998 to 2005 NB Miata. It is made of high quality FRP and gives the vehicle a very aggressive look. Learn More
-
Garage Vary Type-N (T-N) Front Bumper
$899.99T-N Front Bumper made by Garage Vary for the NA (1989-1997) MX-5 Miata. It's made of high quality FRP and will give the front of the car a much more aggressive look while improving the aerodynamics. It also has much bigger openings so the airflow to the radiator/engine bay/brakes is also improved.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary Type-N Side Steps
Regular Price: $649.99
Special Price $549.99
Side skirts made by Garage Vary to improve the aerodynamics of the NA (1989-1997) MX-5 Miata. It’s their most used side skirts for all type of racing in Japan. It looks awesome when combined with their Type-N Front Bumper and give a much more aggressive look. Learn More
-
Garage Vary Type-N (T-N) Rear Bumper
$699.99T-N Rear Bumper made by Garage Vary for the NA (1989-1997) MX-5 Miata. It's made of high quality FRP and will give the back of the car a REALLY aggressive look while improving the aerodynamics. It made to reduce drag compared to the bulky OEM rear bumper.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Garage Vary DIY Tail Lights
The GV Do-It-Yourself Nostalgic Tail Lights for the NB (1998-2005) Miata/MX-5 are the solution to the now discontinued Mazda Porter Tail Lights (that came with the original Garage Vary Tail Lights Kit). It requires some wiring and assembly, but it’s nothing too difficult that a non-mechanic can do by itself. The kit keeps the same exterior look as the original kit, but requires some DIY work to install it. Instructions are available here (NA shown, but same for NB).
Garage Vary said you will need some modification on the chassis when you install their tail light covers. The part that is normally being covered by sponge tapes will become a hole after you exchange the tail lights. Some waterproof work will be required there. Before painting, please make sure the product fits the car properly. Garage Vary NB Tail Lights includes the following: -FRP Housing (2) -Brake lights (2) -Back lamp (1) Learn More
-
Garage Vary Tail Lights Panel
$374.99The Garage Vary Nostalgic Tail Lamp Panel is made for the NB (1998 to 2005) Miata. This is a brand new, made in FRP, product from Garage Vary in Japan. This product DOES NOT include any tail lamps, it is for the panel ONLY (shown in white). You will need to source the tail lights & back lamp by yourself (sold optionally). If you want a complete kit, please look for the Garage Vary DIY Tail Light Kit or the GV x REV9 LED Tail Light Kit. Learn More
-
Garage Vary Trunk
$524.99Replacement Trunk made by Garage Vary for the NC (2006-2015) MX-5 Miata. It’s made of FRP or Carbon Fiber and will shave some weight off the back of the vehicle. Learn More
-
Garage Vary Front Under Flap
$549.99Front Diffuser (Underflap) made by Garage Vary for the NC3 (2013-2015) MX-5 Miata. It’s a flat FRP piece that fits under the OEM Front Bumper to make the look of the car flatter and improve aerodynamics. Learn More
-
Garage Vary Front Fender Canards
$224.99Fender Canards made by Garage Vary for the ND (2016+) MX5 Miata. They will fit on their Vented Fenders as well as on the OEM Fenders. It generates downforce by controlling the flow of air to the fenders and improve stability at high speed as well as cornering Learn More
-
Garage Vary Trunk
$424.99Replacement Trunk made by Garage Vary for the ND (2016+) MX-5 Miata with Soft Top. It’s made of FRP or Carbon Fiber and weights about the same as the OEM aluminum trunk. Learn More
-
Garage Vary Gauge Hood Cover
$174.99-Available in FRP or Carbon Fiber -Easy to install -Only available for ND (2016+) Miata with Right Hand Drive Learn More
-
Garage Vary Ducktail Spoiler
$284.99Duck tail spoiler made by Garage Vary for the 1998 to 2005 MX-5 Miata. It follows the shape of the body very nicely and gives a clean and straight look to the trunk. It will hide the 3rd brake light and no cut-out is possible, unfortunately. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Shark Hood Ducts
$264.99Aggressive looking hood (bonnet) ducting made by Garage Vary as a “general purpose” product, but that will fit nicely on the NA or NB (1989-2005) Miata. It helps extract heat from the engine bay to help car with cooling and performance. Also, with some small modifications, it’s possible to use on NC. Learn More
-
Garage Vary Type-N Rear Spoiler
$499.993 pieces rear spoiler made by Garage Vary for the non-PRHT NC MX-5 Miatas (2006-2015). It’s has a 3 pieces design so the trunk weight is not affected so much and provides a nice, wide and aggressive look to the back of the vehicle. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Intake Duct
$134.99Intake Duct made by Garage Vary for the 1989-2005 NA/NB MX-5 Miata. It’s made as DIY item that you can install on the US Passenger Side to bring fresh air to your air intake. Learn More
-
Garage Vary BP Cam Cover
$134.99Cam Gears Cover made by Garage Vary for the BP (1.8L) NA/NB Engine. Available in FRP or Carbon Fiber, it’ll add a cool touch to the engine bay and will protect your exposed cam gears with style. Unlike the Maruha Cam cover that requires trimming of the OEM valve cover, the GV BP Cam Cover can be installed ‘over’ the OEM valve cover and upper timing belt cover. Learn More
-
Garage Vary Front Canards
Regular Price: $174.99
Special Price $149.99
Front Bumper Canards made by Garage Vary for the NB1 (1998-2000) and NB2 (2001-2005) MX-5 Miata. These are made for the OEM Front Bumper (not compatible with aftermarket front bumpers). Garage Vary's front canards flows well with the OEM bumper, giving downforce and aggressive look. Looks great with flares and/or sideskirts. Before painting, please make sure the product fits the car properly. Learn More
-
Garage Vary Large Front Garnish
Regular Price: $107.80
Special Price $97.99
Exterior garnish designed by Garage Vary for the 2016+ Mazda MX-5 Miata. The Garage Vary Front Garnish is a subtle exterior garnish that attaches to the front fender and bumper helping to divert air from the wheel area. The idea of the fender garnish is to help reduce front end lift by deflecting air away from the front wheel well area and the front of the tire. The garnish is offered in unpainted FRP and is easily installed using double sided tape and self tapping screws. A small upgrade for the exterior that changes the look and performance of the vehicle. Learn More
-
Garage Vary Large Rear Garnish
Regular Price: $107.80
Special Price $97.99
Exterior garnish from Garage Vary for the Mazda MX-5 Miata (2016+). The Garage Vary Rear Garnish is an easy to install exterior dress up part that helps change the look and aero of the vehicle. The rear garnish installs using double sided tape and self tapping screws for a unique look to the rear of the ND Miata. Garage Vary offers the Rear Garnish in unpainted, white gel coat FRP construction. The garnish is a great addition to help with the fitment of running wider wheels and tires. Learn More
-
Garage Vary Rear Blister Fenders
$649.99Garage Vary Rear Blister Fenders for the ND (2016+) MX-5 Miata. If you’ve been looking to add a noticeable increase in width to the rear end of your ND – check out these Blister Fenders! These Blister Fenders provide an extra 9mm of width per side, allowing for chunkier or more aggressive wheel setups. Garage Vary has modelled these to not interfere with the factory Blind Spot Monitoring system, so you can keep the safety features of your car in place. Please note installation of these Fenders will involve drilling into the rear quarter panels of your car, and that these Fenders are only compatible with the factory rear bumper. Aggressively stylise and change the presence of your car on the road! Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
