Urethane bushing kit for the ND Miata made by Odula. This bushing kit replaces the stock rubber bushings in the rear knuckle to cancel out minor toe alterations during bumps and shudders to the suspension system. Learn More

Sway Bar Links made by Odula for the 2016+ ND MX-5 Miata. These help to adjust (rectify) the angle of the sway bars when car is lowered by 25-50mm. It’ll adjust the geometry of the suspension so it performs better at that ride height. Learn More

Rigid member collar kit made by Odula of Japan. Designed for the ND Miata, these member collars help to fill in tiny spaces between the suspension member and body of the vehicle to increase rigidity. These also increase handling capabilities! Learn More

Handling upgrade from Nielex for the NC and ND Mazda MX-5 Miata (2005-2016+). The Aisin x Nielex Door Stabilizers are a small upgrade with a big change in the handling of the third and fourth generation Miata. The Door Stabilizers fill in the gap between the door and the body of the vehicle to stiffen the chassis aiding in increased stability and steering response. The door stabilizers are an Aisin product that have been modified by Nielex to fix the NC & ND chassis. They were designed to improve the contact of the door with the body creating both a performance upgrade and a luxury feel. The Aisin Door Stabilizers are easily installed using basic hand tools. Learn More

Knuckle support made by Nielex of Japan for the 2016+ ND Miata. This part provides support between the knuckle and suspension arm on the ND5 Miata. Nielex says that this part has the most noticeable improvement during high speed cornering but you will also see a difference at low speeds as well. Compared to their NC version, this support is both larger and uses thicker metal for an even more noticeable difference! Learn More

Nielex is always trying to find ways to improve Mazda’s Roadsters. They came up with this Brake Master Cylinder Stopper that will fit the 1.5L and 2.0L ND MX-5 (2016+) as well as the Fiat Abarth 124 Spider. The bulkhead that attaches the master cylinder from the brake pedal is quite thin and this piece solves the brake pedal firmness issue. It’ll give the pedal a more linear feeling versus OEM. It’s made of 2 parts for ease of installation and design coolness! Learn More

5 Point Body Reinforcement Kit made by Nielex for Manual Transmission (MT) 2016+ ND Miata. A must have upgrade to improve the steering feel of the car to create a more engaging driving experience. The kit was created after testing the ND stock form for six months. It determined that the ND model had a weaker front end resulting in a tendency to understeer in corners. Made with SUS 304 stainless steel, the kit will give you better neutral steering and allow you to mount larger tires without compensating on performance. Recommended along side high grip tires and upgraded suspension for best results. Learn More

Low down springs made for the ND RF (2016+) Miata by Murakami. Murakami Motors designed these springs to have great street drivability and give a drop of about 25~30mm in the front and 20~25mm in the rear. It looks awesome when combined with Rays TE37 Sonic 16" Wheels. Learn More

Chassis reinforcement plates made by Murakami Motors of Japan. These plates were made as part of a collaboration with Nagisa Auto and were designed to help stiffen up the chassis of your ND Miata! These plates connect the shock upper mount to the bulkhead in order to tighten up the car and improve handling. They install easily and will create a noticeable difference in the feel of the car. Plates come in the color black, please inquire if you’d like yours in a different color. Learn More