You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
Browse By
- Category
-
- Adjustable Arms (7)
- Bushings (7)
- Chassis Bracing (21)
- Coilovers (6)
- Roll Bars & Cages (2)
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Suspension & Chassis
-
Cusco Street Coilovers
Regular Price: $1,099.99
Special Price $1,044.99
Adjustable suspension made by Cusco for the NA (1989-1997) and NB (1998-2005) Miata. It’s made for street use (not racing purpose). It’s their entry-level model that’s made for those who want a neater looking car with a top quality suspension. It’s a standard coilover that’s adjusted via spring seat. The STREET series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is made as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at the lowest price. The newly developed twin tubeshock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. Each coilover suspension is specially valved and dimensionally designed per vehicle application. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Cusco Street Zero Coilovers
Regular Price: $1,299.99
Special Price $1,234.99
Adjustable (coilover) suspension system made by Cusco of Japan for the 1989-1997 NA Miata and the 1998-2005 NB MX-5 Miata. This kit is designed as more of an entry level kit, featuring a fixed damper strength with adjustable height. A kit such as this is great for those who daily drive their car, want a perfect ride height and don’t plan on racing too much. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Cusco Street Zero-A Coilovers
Regular Price: $1,599.99
Special Price $1,519.99
Height adjustable suspension kit made by Cusco in Japan for the NA (1989-1997) and NB (1998-2005) Miata. It has 40 possible adjustment from damping and can be lowered -117mm in front and -60mm in the rear. It comes with front and rear reinforced rubber upper mounts. Regular spring rate is 5kgf/mm front (6,7,8kgf/mm available) and 4kgf/mm rear (5,6,7kgf/mm available) but can be changed for free. Optional E-CON2 controller (damping force) available. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Cusco Street-A Coilovers
Regular Price: $1,299.99
Special Price $1,234.99
Coilover suspension made by Cusco for the NA (1989-1997) and NB (1998-2005) Miata. It’s made for street use and has more adjustment levels than the Cusco Street Coilovers. It’s made for those who want a neater looking car with a top quality suspension and adjustable damping. It’s a standard coilover that’s adjusted via spring seat. The STREET-A series suspension coilover system is designed to provide a lowered vehicle ride height while enabling damper adjustability. The newly developed 40 way damper adjustable shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition. This suspension coilover is perfect for those who want a wide range of shock dampening adjustment but do not often take their vehicles to the race track. The standard coilover design enables this kit to be priced significantly lower than the full height adjustable systems. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More
Out of stock
-
Cusco Sway Bars
Regular Price: $299.99
Special Price $249.99
Front And Rear Stabilizers made by Cusco for the NA (1989-1997) Miata. This bar will have a very noticeable effect on handling. It will increase stability during cornering and high speed lane changing. Please note that the images are generic images, the actual sway bar shape will be slightly different. Learn More
-
Espelir Super Downsus Springs
$274.99Espelir spring kit for the NB Miata (1998-2005) These springs come from Espelir’s Downsus line, which is a softer spring very appropriate for street use. These springs will lower the car approximately 43~48mm front and 27~32mm rear to give it a more sporty and aggressive stance. Learn More
-
JoyFast Front Pillow Upper Arms
$599.99Product made by JoyFast to replace OEM Front Pillow Upper Arms with 10mm shorter ones and increase camber angle of the NA or NB vehicle by ~1-1.5 degrees. It’s made for racing use. Learn More
Out of stock
-
Ken Auto Door Bushings (Cups)
$69.99Original door bushing (dove tail/cups) designed by KenAuto in Japan. This is the thickest possible size and most effective door bushing on the market used by thousands on Japanese Roadsters in the circuit. This piece is a replacement for the stock part that the door sits on when closed. By replacing the brittle stock unit, you’ll notice more steering response and less suspension wiggle. This piece will do a great job of stiffening up your Miata. Installs in minutes and creates a noticeable difference in drivability. Some of the JDM shops such as Joyfast & TUCKIN99 had very high praise for the part and use them on all their race cars now! Learn More
-
Nielex Front Knuckle Arm Support
$199.99Product made by Nielex. The original front knuckles lack the sufficient hardness of the lengthwise direction in the structure. The drivers feel that the strength of the handling is not good enough especially when they drive in cornering at the high-speed because the deflection of the knuckles is very obvious. Nielex thought up the Front Knuckle Arm Support in order to solve these problems. While we were developing this new product, we were able to get advices from Mr. Oda who used to work for Mazda for a long time and were in charge of the development of chassis and suspension of Mazda's sports cars. Once the driver installs this product, I can say that everybody can feel the wonderful effect. It can be felt even during the low-speed drive. The most impressive effect can be felt when a car runs at over 140km/h, and the driver can feel that the handling gets more stable. NA with ABS : you will need to re-route the cable of the ABS sensor. Learn More
-
Nielex Magical Cross Bracing (1.6L Chassis)
$1,749.99The Magical Cross is Nielex’s most popular chassis item. It really changes the handling of the vehicle, making it much stiffer and much more agile. It’s made to give pleasure to the person who enjoy spirited driving, but it’ll also improve performance at the track (most Japanese tuners use this product). The kit has been tested for years before being released and it’s made to transform the vehicle and bring handling to another level. Nielex claims that even vehicles with over 120,000 miles will have stiffer chassis than new cars by just using the Magical Cross. It improves steering responsiveness and also helps keep tires to the ground for much more traction during cornering. It also reduces frame twist drastically to have a more stable and neutral car. It basically transforms the car into a real fun go kart that you can enjoy driving in the streets or at the track. Kit includes: -Front Frame Cross Bar (connects left and right of front frame near engine bay) -Front Under Cross Bars (connects front cross members and front body frame) -Rear Under Cross Bars (Connects right and left frame as well as rear cross members together) Please note that some welding is required to fit brackets on the chassis to fit some braces, depending on the vehicle year Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2024
