We ship worldwide!     Contact us : info@rev9autosport.com

We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close

Exterior Garnish

Grid  List 

per page
Set Descending Direction

Items 11 to 92 of 82 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Brightning Headlight Air Intake Lid For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Brightning Headlight Air Intake Lid

    $229.99
    Product made by Brightning to help engine cooling. DISCONTINUED AND NO LONGER AVAILABLE. Learn More

    Out of stock

  2. Brightning Tail Lights Cover For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Brightning Tail Lights Cover

    $299.99
    Product made by Brightning. Made with high quality FRP. Sticks onto your stock tail lights with double sided tape. 3 round holes shaped perfectly for each use of the tail light bulbs. DISCONTINUED AND NO LONGER AVAILABLE. Learn More

    Out of stock

  3. Zoom Retro Fuel Lid For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Zoom Retro Fuel Lid

    Regular Price: $259.99

    Special Price $244.99

    Add a touch of retro to your exterior with this fuel lid designed by Zoom Engineering of Japan. Made of polished aluminum, it can be installed in 10 minutes using the tools in the kit and requires no cutting to the body. It comes with both brackets, as well as all original screws and hardware. Only available for NA Miata (1989-1997) and NB Miata (1998-2005) models. Learn More

  4. Garage Vary Headlight Air Intake Lid For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Garage Vary Headlight Air Intake Lid

    Regular Price: $229.99

    Special Price $184.99

    Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More

  5. REV9 OE-Style Fender Flares For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    REV9 OE-Style Fender Flares

    $277.99
    Product from JAPAN made from high quality FRP or Carbon Fiber. Gives a subtle touch to cars with low or negative offset. It is also an inexpensive way to make your car more agressive looking. Learn More

  6. Jet Stream Hardtop Spoiler For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Jet Stream Hardtop Spoiler

    $399.99
    Product made by Jet Stream. High quality FRP. Flows well with OEM hardtops. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  7. Jet Stream Door Handle Covers For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Door Handle Covers

    $119.99
    Product made by Jet Stream. Made from high quality FRP. Adds a really nice touch to your exterior. Please note that the Black Gel Coat is NOT the pictured Carbon Fiber. It's Glossy Black that is meant to be painted for a better look. Learn More

  8. Jet Stream Rear Canard For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Rear Canards

    $274.99
    Product made by Jet Stream. Jet Stream's rear valence flows well with the rear bumper. Looks great with flares, sideskirts, and canards. Learn More

  9. Jet Stream Side Canards For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Side Canards

    $199.99
    Product made by Jet Stream. High quality product. Looks great with flares, sideskirts, and canards. Learn More

  10. Jet Stream Rocker Panel Trim For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Rocker Panel Trim

    $274.99
    Product made by Jet Stream. High quality product. Looks great with flares. Attaches with 3M double-sided tape and a few screws. Learn More

  11. Jet Stream Fender Flares

    Jet Stream Fender Flares

    $514.99
    Product from JAPAN made from high quality FRP. Original product made by Jet Stream. It gives the capacity to run wider wheels with lower offset and larger tires on your roadster without compromising the look of it! Please note that these are OVER FENDERS. Learn More

  12. Jet Stream Headlight Air Intake Lid For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Headlight Air Intake Lid

    Regular Price: $224.99

    Special Price $179.99

    Product made by Jet Stream to help engine cooling. Learn More

  13. Jet Stream Turn Signal Intakes For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Jet Stream Turn Signal Intakes

    Regular Price: $299.99

    Special Price $274.99

    Winker duct (TSI) made by Jet Stream. High quality product. These Turn Signal Intakes made by Jet Stream are much more unique then other TSI's out there today. Very sleek and flows well. It'll provide additional airflow to the engine bay and help reduce overall temperature while giving you a much cooler styling to the exterior of the car. UPDATE: Always come with mesh grille. Easy to remove if you don't want to have it. Learn More

  14. Carbing Tow Hook For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Carbing Tow Hook

    $134.99
    Product from JAPAN made by Carbing. Made of steel and solid enough to be used for emergency. Learn More

  15. TRAP Original Rear Finish Panel For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    TRAP Original Rear Finish Panel

    $324.99
    Product made by TRAP. A Simple, yet effective piece made by TRAP. This flush rear panel replaces your stock finish panel with ease. Would compliment a shorty rear bumper beautifully. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  16. Zeromotive Rear Canards For Miata MX5 MX-5 98-05 JDM Roadster : REV9 Autosport

    Zeromotive Rear Canards

    $149.99
    Product made by Zeromotive. Zeromotive's rear canards flows well with the rear bumper. Looks great with flares and/or sideskirts Learn More

  17. TRAP Flat Trunk For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    TRAP Flat Trunk

    $619.99
    Product made by TRAP. Made from high quality FRP. While eliminating the third brake light, TRAP's flat trunk gives the rear end a sleek look. Learn More

  18. Zoom LED Side Markers For Miata MX5 MX-5 89-09 JDM Roadster : REV9 Autosport

    Zoom LED Side Markers

    $139.99
    Side Markers (Blinkers) with LED light made by ZOOM ENGINEERING for the NA, NB or NC (1989-2015) MX-5 Miatas. Nice addition for those looking for a retro exterior. Learn More

  19. Zeromotive Wiper Wing For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Zeromotive Wiper Wing

    Regular Price: $74.99

    Special Price $67.99

    Product from JAPAN made from high quality Carbon Fiber. Replacement for the OEM wiper wing. Learn More

  20. Garage Vary Hardtop Rain Rails For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Garage Vary Hardtop Rain Rails

    $144.99
    Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the hardtop more functional when it rains or after a shower. Before painting, please make sure the product fits the car properly. Learn More

  21. Zeromotive Muffler Trim For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Zeromotive Muffler Trim

    $124.99
    Product made by Zeromotive. High quality CF. This CF muffler trim adds a great look to the rear of your car. Attaches to your rear bumper with double-sided tape but rivets are recommended also. Learn More

  22. KG Works Spray Washer Nozzle For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    KG Works Spray Washer Nozzle

    $94.99
    Spray Washer Nozzles made by KG Works for the NA (1989-1997) or NB (1998-2005) MX-5 Miata. They are chrome plated and will add a nice classy touch to the exterior of the car.

    KG Works Acknowledgement
    KG Works Company is slowly getting out of the Roadster business. They can provide us products, but the production or timeframe is not precise. Please expect a minimum of 1-3 months wait time when ordering. We CANNOT provide ETAs after an order is placed. All that we can promise is that once it's ready, we will ship to you. Your order can be cancelled at any time if the wait becomes too long.

    Learn More

  23. Nakamae Quilted Top Cover For Miata MX5 MX-5 1989-2005 JDM Roadster : REV9 Autosport

    Nakamae Quilted Top Cover

    $449.99
    Product made by Nakamae. Cover your stock dirty/ripped/worn seat with Nakamae's stylish top cover. Learn More

    Out of stock

  24. Project-G G-Wing Hardtop Spoiler For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Project-G G-Wing Hardtop Spoiler

    $249.99
    Product made by Project-G. High quality acrylic item. Flows well with OEM hardtops.

    Project-G Products ship from our USA warehouse. We recommend placing a separate order only for Project-G items as there are no shipping savings to combine these with other parts from our store.

    2022 UPDATE : Due to supply chain issue at Project-G during pandemic, we decided to stop selling their products as the production lead time became too unpredictable. We are sorry for the inconvenience. Learn More

    Out of stock

  25. Garage Vary Front Canards

    Garage Vary Front Canards

    Regular Price: $174.99

    Special Price $149.99

    Bumper Canards made by Garage Vary for the 1989 to 1997 NA MX-5 Miata. Available in 2 sizes and made of FRP or Carbon Fiber, you'll be able to select the level of aggressiveness & downforce to your front bumper. Garage Vary's front canards flows well with the OEM bumper, giving downforce and aggressive look. Looks great with flares and/or sideskirts. Before painting, please make sure the product fits the car properly. Learn More

  26. Garage Vary Front Garnish For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Garage Vary Front Garnish

    Regular Price: $199.99

    Special Price $174.99

    Product made by Garage Vary. Garage Vary's front garnish flows well with the OEM front lip, helps hide low offset wheels/tires. Before painting, please make sure the product fits the car properly. Learn More

  27. Garage Vary Rear Garnish For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Garage Vary Rear Garnish

    $149.99
    Product made by Garage Vary. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. Before painting, please make sure the product fits the car properly. Learn More

  28. Project-G G-String Bikini Top For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Project-G G-String Bikini Top

    $324.99
    Product made by Project-G. YOU CAN GO TOP DOWN IN SECONDS AND THROW YOUR G-STRING IN THE TRUNK! **Please keep in mind, this is in many ways, a universal fit Bikini Top. Only the length will be custom fit to your particular vehicle. Differences in roll bar brand, style, height, installation, placement, diameter, etc. can impact the fitment of this particular piece. Bikini Bar is not available anymore. This will only fit vehicles equipped with a roll bar.

    Project-G Products ship from our USA warehouse. We recommend placing a separate order only for Project-G items as there are no shipping savings to combine these with other parts from our store.

    2022 UPDATE : Due to supply chain issue at Project-G during pandemic, we decided to stop selling their products as the production lead time became too unpredictable. We are sorry for the inconvenience. Learn More

    Out of stock

  29. ZOOM Headlight Air Intake Lid For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    ZOOM Headlight Air Intake Lid

    $159.99
    Product made by ZOOM to help engine cooling. Learn More

  30. Garage Vary Front Air Deflector For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Garage Vary Front Air Deflector

    $449.99

    Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more stable at high speed. Before painting, please make sure the product fits the car properly.

    Please note that it will only work with a Garage Vary Front Lip.

    Learn More

  31. Garage Vary Side Air Deflector For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Garage Vary Side Air Deflector

    $349.99
    Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more aerodynamic. Before painting, please make sure the product fits the car properly. Learn More

  32. Garage Vary Headlight Air Intake Lid For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Garage Vary Headlight Air Intake Lid

    $174.99
    Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More

  33. Zeromotive Carbon Front Canards For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Zeromotive Carbon Front Canards

    $174.99
    Product made by Zeromotive. The front canards flows well with the OEM bumper, giving downforce and aggressive look. Available in LONG and SHORT version, both are very similar but can be seen from pictures. It comes with screws. The only tool you need is a screwdriver, and you don't have to make the pilot holes in advance because the genuine bumper is made of urethane. Learn More

  34. Garage Vary Hardtop Turbulator

    Garage Vary Hardtop Turbulator

    $399.99
    Product made by Garage Vary from high quality FRP to create turbulence over the hardtop and increase downforce (used as vortex generators). It is made to bring “better airflow” to cars with rear spoilers. White NB only has the top part where the Black hardtop shows the 3 pieces kit. Learn More

  35. Zeromotive Carbon Front Canards For Miata MX5 MX-5 89-05 JDM Roadster : REV9 Autosport

    Integral Kobe Fender Canards

    $249.99
    Product made by Jet's (Integral Kobe). The fender canards is a new product they tested and built at the track. They liked the look and gains from it, so they decided to offer it to the public. It generates downforce by controlling the flow of air to the fenders and improve stability at high speed as well as cornering. Learn More

  36. Paddock Style Bumper Duct

    Paddock Style Bumper Duct

    $99.99
    The Paddock Style Bumper Air Ducting is made to improve airflow to the engine bay. It goes right behind where a front license plate usually is and helps bring cool air to the radiator. It’s made for circuit use, where license place can be removed without any problem. Outer dimensions; top 20 x bottom 19 x height 6 cm Inner dimensions; top 19 x bottom 18 x height 3.5 cm Learn More

  37. RS Factory Stage GT Sunshade

    RS Factory Stage GT Sunshade

    $144.99
    Windshield Sunshade made by RS Factory Stage for those who want a non-permanent addition to their Roadster. It’s installed from the inside and can be removed at any time. Made of acrylic, it’s even possible to customize it with your favorite stickers. Learn More

  38. Nakamae Top Cover

    Nakamae Top Cover

    $299.99
    Top cover made by Nakamae. Cover your stock dirty/ripped/worn seat with Nakamae's stylish top cover. Comes in different leather and stitching colors. Learn More

    Out of stock

  39. Mazda Roadster (ND) JDM Emblem

    Mazda Roadster (ND) JDM Emblem

    $34.99
    Original "Roadster" badge from JDM (Japan-spec) 2016+ ND Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. Learn More

  40. NUE Front Fender Cut

    NUE Front Fender Cut

    Regular Price: $184.99

    Special Price $164.99

    This hollowed fender garnish is made by NUE for the 1989-1997 NA Miata. It's a do-it-yourself piece that requires cutting into the fender and metal of vehicle to fit, but improves the look of the car a lot. Learn More

  41. TRAP Mesh Rear Finish Panel

    TRAP Mesh Rear Finish Panel

    $249.99
    Rear finish panel made by TRAP out of quality FRP. A Simple, yet effective piece made by TRAP. This mesh rear panel replaces your stock finish panel with ease. Learn More

  42. Project-G Corner Flares

    Project-G Corner Flares

    Regular Price: $224.99

    Special Price $184.99

    The Project-G corner flare is a beautiful piece that will help cover the rear tires from NA (1989-1997) Miata running low offset wheels. It gives a nice flares appearance to the rear of the vehicle and flows well with the vehicle lines.

    Project-G Products ship from our USA warehouse. We recommend placing a separate order only for Project-G items as there are no shipping savings to combine these with other parts from our store.

    2022 UPDATE : Due to supply chain issue at Project-G during pandemic, we decided to stop selling their products as the production lead time became too unpredictable. We are sorry for the inconvenience. Learn More

    Out of stock

  43. Arios Front Blister Fenders

    Arios Front Blister Fenders

    $1,024.99
    Original blister fenders made by Arios for the NA (1989-1997) Miata. It gives the capacity to run wider wheels with lower offset and larger tires on your roadster without compromising the look of it! It will work with OEM bumper as well as other aftermarket bumpers that follow OEM lines. Those blister fenders are replacement fenders. Learn More

  44. Arios Rear Blister Fenders

    Arios Rear Blister Fenders

    Regular Price: $849.99

    Special Price $649.99

    Genuine rear blister fenders made by Arios for the NA (1989-1997) Miata. It gives the capacity to run wider wheels with lower offset and larger tires on your roadster without compromising the look of it! It will work with OEM bumper as well as other aftermarket bumpers that follow OEM lines. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  45. Zeromotive Aeroguard II

    Zeromotive Aeroguard II

    $64.99
    Body part guard made by Silk Blaze & Zeromotive of Japan. This part is a MUST have for those with extremely low vehicles, or for those with low-hanging aero parts. With a very low car, even small changes in elevation can cause you scrape the front, rear, or even the side skirts of your car. The aeroguard material attaches below the aero parts using durable 3M double sided tape and will provide a soft cushion and protect the finish of your cars body components. 1 roll is 29mm x 4mm x 3m The aeroguard material attaches extremely easily; simply clean the part you wish to attach it to, peel back the adhesive cover and apply! If you wish to wrap the material around a corner, simply cut little triangles into the material for a smooth, even angle. Learn More

  46. 326POWER License Plate Spike Bolts & Washers

    326POWER License Plate Spike Bolts & Washers

    $124.99
    Very extreme looking license plate bolts using the legendary 326POWER spike design that made their Lug Nuts and Valve Stem Caps very popular. It’s a universal product and will fit all type of vehicles. Learn More

  47. TRAP Hard Top Duct

    TRAP Hard Top Duct

    $299.99
    Hard top duct from TRAP of Japan for the NA Miata that is based on the design used on Mazdaspeed Hardtops. This duct for the hard top works to draw outside air in to the cabin or let air out of your cockpit. The duct utilizes partitions within the unit in order to allow the user to either let air in or out of the cockpit. A hard to find part from Japan that will be sure to make your NA stand out. Learn More

  48. Nielex Chrome Wiper Arm Caps

    Nielex Chrome Wiper Arm Caps

    Regular Price: $119.99

    Special Price $109.99

    Replace your old and cheap plastic wiper arm caps with these beautiful chrome metal covers that will give a luxury look to your NA or NB MX-5 Miata (1989-2005). It's installed using a patent-pending method that uses magnets and makes it very easy to install or remove for emergency wiper change. It's also waterproof and will resist aging much better than the OEM plastic ones. Learn More

  49. Roadster (NC) JDM Badge

    Roadster (NC) JDM Badge

    $44.99
    Original "Roadster" emblem from JDM (Japan-spec) 2006-2015 NC Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. Learn More

  50. REV9 License Plate Frame

    REV9 License Plate Frame

    Regular Price: $14.99

    Special Price $9.99

    Classy and elegant License Plate Frame made of plastic with embossed “REV9” logo (white & red). Shows your support to the high quality JDM community and we will be more than honored to be shown on your car. It’s made to fit USA & Canada license plates size, international is not confirmed yet. Learn More

  51. Roadster (NA) JDM Badge

    Roadster (NA) JDM Badge

    $49.99
    Original "Roadster" emblem from JDM (Japan-spec) 1989-1997 NA6CE/NA8C Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. It is BRAND NEW and comes with the back adhesive. We bought the remaining stock from Mazda Japan, so this product is DISCONTINUED and available in LIMITED QUANTITIES. Learn More

  52. Garage Vary Tail Lights For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    Garage Vary Nostalgic Tail Lights Panel

    $449.99
    The Garage Vary Nostalgic Tail Lamp Panel is made for NA (1989-1997) MX-5 Miata. This is a brand new, made in FRP, product from Garage Vary in Japan. This product DOES NOT include any tail lamps, it is for the panel. You will need to source the tail lights & back lamp by yourself (sold optionally). If you want a complete kit, please look for the Garage Vary DIY Tail Light Kit or the GV x REV9 LED Tail Light Kit. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  53. Garage Vary Restoration Rocker Panels

    Garage Vary Restoration Rocker Panels

    Regular Price: $334.99

    Special Price $314.99

    Replacement side sill (rocker panels) for the NA 1989 to 1997 Mazda Miata. These are used to replace the rusty panels with brand new and perfectly shaped fiberglass (FRP) ones. It will require cutting of the OEM rocker panels as well as filler to make sure it perfectly flows in. Learn More

  54. Project-G G-Vents Vented Wing Window

    Project-G G-Vents Vented Wing Window

    Regular Price: $119.99

    Special Price $47.99

    The Project-G’s “G-Vent” is a clever little vent to allow air in the cabin without using your normal windows on your NA or NB Miata (1989-2005). A gentle flow of air can be felt even on high speeds. Unlike other similar vents, the G-vent is larger in diameter and more scratch resistant than its competitors. The G-vent is water tight when closed and shouldn’t be an issue in the rain. No whistling or wind noise. Installation is moderately simple.

    Project-G Products ship from our USA warehouse. We recommend placing a separate order only for Project-G items as there are no shipping savings to combine these with other parts from our store.

    2022 UPDATE : Due to supply chain issue at Project-G during pandemic, we decided to stop selling their products as the production lead time became too unpredictable. We are sorry for the inconvenience. Learn More

    Out of stock

  55. TUCKIN99 License Plate Relocator

    TUCKIN99 License Plate Relocator

    $79.99
    License Plate Holder (Relocator) that is sideway made by TUCKIN99 for the NA (1989-1997) & NB (1998-2005) MX-5 Miata. It’ll move the license plate to the side so that the radiator becomes unobstructed and gets more fresh air. Please note that if your license plate has different hole size than Japan, some drilling (additional holes) might be required. Learn More

  56. NUE Rear Side Canards

    NUE Rear Side Canards

    $274.99
    Rear Side Diffusers made by NUE in Japan for the NA (1989-1997) MX-5 Miata. They are intended to provide downforce from airflow during high speed. Learn More

  57. ZOOM Trunk Rack

    ZOOM Trunk Rack

    $674.99
    Trunk rack (carrier) made by ZOOM for the NA (1989-1997) and NB (1998-2005) Mazda MX-5/Miata. Made from highly durable corrosion resistant stainless steel (19mm diameter polished tubing), it can comfortably hold larger and heavier loads then other racks on the market. The front section is fixed using the OEM hardtop fixing screws and the back is supported by the rear fenders to avoid bending the trunk under heavy load. It can handle anything up to 50kg and 100cm x 54cm in size. The rack also incorporates a newly designed trunk linkage that allow the trunk to open and close with the rack still installed and also keeps the rack fixed to the trunk even when there is no weight on top. The rack come with two straps, one to put across diagonally and one vertically. A very functional piece to add more luggage space to the world's favorite roadster. Please make sure to specify whether the Miata is a hard or soft top when ordering. Learn More

  58. Jet Stream Windshield Banner

    Jet Stream Windshield Banner

    Regular Price: $99.99

    Special Price $49.99

    Windshield Banner by Jet Stream for NA (1989-1997) and NB (1998-2005) Mazda Miata/MX-5. A great looking banner to add a race car look to the Miata. Pre-cut for a easy install on to the windshield with the added benefit of blocking the sun for those that drive a lot in sunny areas. Perfect way to show support for Jet Stream, a company dedicated to Miatas. Comes in two great colors, orange and black. Learn More

  59. Jet Stream Rocker Panel Trim For Miata MX5 MX-5 89-97 JDM Roadster : REV9 Autosport

    NUE Side Deflector

    $239.99
    Side deflector (corner flare) made by NUE for the NA (1989-1997) MX-5 Miata. It’s made to hide the lower part of the tire sticking out from the fender for people running wider wheels & tires. It can be installed onto OEM body or cars with NUE Fender Flares. Learn More

  60. Zeromotive Headlight Air Intake Lid

    Zeromotive Headlight Air Intake Lid

    $129.99
    Air Intake for the NA (1989-1997) Headlight Lid made by Zeromotive to help engine cooling. It has a nice aggressive look and is available for both headlight sides! Before painting, please make sure the product fits the car properly. Learn More

  61. ZOOM Eunos Badge

    ZOOM Eunos Badge

    $29.99
    Eunos badge by Zoom for NA (1989-1997) & NB (1998-2005) Mazda Miata/MX-5. A classic look for a now classic car, these badges are a versatile piece to customize the 1st generation roadster. With a diameter of 50mm and thickness 1.8mm for the plastic version they work perfect as a horn button on aftermarket steering wheels and also look great as a exterior badge to pay homage the original Eunos line. Learn More

  62. Jubiride Headlight Intake Lid

    Jubiride Headlight Intake Lid

    $154.99
    Beautiful headlight lid with integrated intake cutout made for the NA (1989-1997) Miata. It’s available for both driver and passenger side and will be great when combined with a Cold Air Intake or an IRTB Kit. Learn More

  63. D.Speed Luck Stickers

    D.Speed Luck Stickers

    $29.99
    Want to add a little charm to the interior or exterior of your car? This is for the superstitious ones that want to make sure nothing bad will happen to their car! The sticker shows “TOP OF THE WINDING ROAD” ; “PRAY TO GODS BY D.SPEED”. Price is for 2 stickers. Learn More

  64. Autoexe Evolution Wipers

    Autoexe Evolution Wipers

    Regular Price: $114.99

    Special Price $97.99

    Replacement wiper blades made by Autoexe Japan that will fit ALL YEARS Miatas. No need to get additional Wiper Wing, it is included. The new (evolution) wiper blades have aerodynamics fins that will provide pressure to avoid wiper lift at high speed. Learn More

  65. Jet Stream Window Vent

    Jet Stream Window Vent

    $174.99
    Looking to get fresh air in your Miata? This cool and easy to install/remove piece made by Jet Stream will install in the driver and passenger triangle window of your NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. Its design allows to stay permanently and has a moving mechanism that allows changing its position when not in use. It can also be installed temporarily using suction cups mounts. Learn More

  66. Garage Vary Shark Hood Ducts

    Garage Vary Shark Hood Ducts

    $264.99
    Aggressive looking hood (bonnet) ducting made by Garage Vary as a “general purpose” product, but that will fit nicely on the NA or NB (1989-2005) Miata. It helps extract heat from the engine bay to help car with cooling and performance. Also, with some small modifications, it’s possible to use on NC. Learn More

  67. Mazda Roadster 2020 (ND) JDM Emblem

    Mazda Roadster 2020 (ND) JDM Emblem

    $44.99
    Original "Roadster" badge from JDM (Japan-spec) 2020+ (UPDATED) ND Mazda Roadster. It's a great change for those who want to replace their old "Miata" or "MX-5" emblem. The 2020 model has a regular font type, compared to the 2016-2019 model with "italic" font. Please note that the pins behind don't line up with OEM "MX-5" emblem. It means that may need to remove the pins and fill holes from previous emblem. Learn More

  68. Garage Vary Intake Duct

    Garage Vary Intake Duct

    $134.99
    Intake Duct made by Garage Vary for the 1989-2005 NA/NB MX-5 Miata. It’s made as DIY item that you can install on the US Passenger Side to bring fresh air to your air intake. Learn More

  69. Shinkai Fuel Lid Cover

    Shinkai Fuel Lid Cover

    $199.99
    Add a classic style to the NA Miata (1989-1997) with the Shinkai Fuel Lid Cover. This fuel lid cover is designed to evoke the classic fuel door shape and appearance. The Shinkai Fuel Lid is made of fiberglass-reinforced polymer (FRP) and plated for a shiny, chrome finish. The fuel lid cover attaches to the OEM fuel door with the use of double-sided tape for an easy installation. Learn More

  70. Shinkai Plated Wiper Arms

    Shinkai Plated Wiper Arms

    $337.99
    Enrich the exterior of your NA or NB Roadster (1989-2005) with the Shinkai Plated Wiper Arms. These high quality plated replacement wiper arms are available in two different finishes, silver plating and smoke plating that provides a classic styling to the exterior. This set of wiper arms retains the NA style arm and the aero blade attachment. The arm can be used with or without the aero blade attachment installed. This set of arms is compatible on both the NA and NB chassis. The Shinkai Wiper Arms fit most wiper blades thanks to retaining the J hook design. Learn More

  71. Shinkai Plated Wiper Blades

    Shinkai Plated Wiper Blades

    $247.99
    Increase the exterior appeal of your NA, NB, or NC Roadster (1989-2015) with the Shinkai Plated Wiper Blades. The OE replacement wiper blades feature high-quality plating that is available in silver plating or smoke plating. The Shinkai Wiper Blades are directly compatible with NA and NB Roadsters, for use with the NC chassis you will need to reuse the metal retainers. Allows the customer to use genuine wiper blade rubber. Learn More

  72. Aotenjo Antenna Hole Cap

    Aotenjo Antenna Hole Cap

    $39.99
    Antenna Hole Cap made by Aotenjo for the NA and NB Mazda MX-5 Miata (1989-2005). It is designed out of necessity to cover the hole left from removing the antenna on the NA or NB Roadster. Learn More

  73. Zeromotive Headlight Lid

    Zeromotive Headlight Lid

    $79.99
    Beautiful headlight lid with or without intake ducting made for the NA (1989-1997) Miata made by Zeromotive Japan. It’s available for both driver and passenger side and will be great when combined with a Cold Air Intake or an IRTB Kit. Learn More

  74. RS Factory Stage Metal Rocker Repair Panel

    RS Factory Stage Metal Rocker Repair Panel

    $254.97
    A replacement side panel for the NA Mazda MX-5 Miata (1989-1997) offered by RS Factory Stage. The RS Factory State Side Sill Repair Panel was designed to provide a new way to remove unsightly rust holes on the lower side sills of the NA Miata. The RS Factory repair panel is molded off of a 3D scan for a precise fit and maintains the side lower body line. The Side Sill Repair Panel is sold individually and sealed with a black, rustproof treatment over the sheet metal construction. A great way to save any NA Miata. Learn More

  75. Project Kics Number Plate Bolts

    Project Kics Number Plate Bolts

    $54.99
    A license plate bolt set for added security from Kics Racing Gear for ALL YEARS Mazda Miata. The Kics License Plate Bolts are a four piece exterior dress up hardware designed to secure the license plate with a stainless steel, Torx shape. The Kics License Plate Bolts are offered in a black chrome finish with silver logo treatment on top. All kits come with both the washers and bolts, as well as, the specialty Torx L-Shaped tool. All bolts are 21mm overall height, with 15mm available thread, please check the depth of your license plate before purchasing. Learn More

  76. Project Kics Leggdura License Plate Bolts

    Project Kics Leggdura License Plate Bolts

    $64.99
    A security license plate bolt from Kics Racing Gear to add style and deter theft that will fit on ALL YEARS Mazda Miata. The Kics Leggdura License Plate Bolts use a unique shape to help improve security against theft. The Leggdura Plate Bolts also feature an aluminum knurled finished cap to enhance the exterior look of the vehicle. Kics Leggdura License Plate Bolts are available in four colors, red, blue, gold, and black. Each set comes with 4 aluminum caps, steel bolts, and Leggdura logo emblems. The HEX security lock tool is also included to make for easy installation. Learn More

  77. Jet Stream Clubman R Front Lip For Miata MX5 MX-5 01-05 JDM Roadster : REV9 Autosport

    Pit Crew Triple Tail Lights Spoiler

    $619.97
    This is the ultra-rare Triple Tail Spoiler made by Pit Crew Racing which gives a small FD3S RX7 look to the back of the NA MX-5 Miata (1989-1997). It's a high quality product that is unique and easy to install. It has an integrated ducktail, making it one very cool piece that'll change the look of your car. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  78. Majestic Carbon Eunos Emblem

    Majestic Carbon Eunos Emblem

    $64.97
    Exterior emblem for the NA or NB (1989-2005) Mazda MX-5 Miata that is produced by Majestic. The Majestic Carbon Eunos Emblem is a twill carbon fiber construction emblem with a stylized Eunos text. The small emblem can be affixed to the exterior of the vehicle using double-sided tape to add a unique look to the vehicle. The emblem features an engraved Eunos writing that gives the car a cool look. Learn More

  79. ZOOM License Plate Stay

    ZOOM License Plate Stay

    $79.97
    Offset license plate stay for the NA (1989-1997) & NB (1998-2005) MX-5 Miata. It moves the license plate lower than OEM point to give the vehicle a stylish look. Please note that you might need to plug the OEM holes left from removing the license plate. Learn More

  80. Jet Stream Gurney Hood Flap

    Jet Stream Gurney Hood Flap

    $304.97
    Hood Gurney Flap created by Jet Stream for the NA and NB MX-5 Miata (1989-2005). The Hood Gurney Flap is a precision-crafted part engineered by Jet Stream to deflect air away from the front windscreen contributing to a subtle increase in front down force while also enhancing heat extraction in vented hoods. Crafted from lightweight and durable carbon fiber, the Hood Gurney Flap seamlessly integrates with the upper edge of your Miata's hood. The precision engineering ensures a sleek and race-inspired aesthetic while delivering tangible benefits to your driving experience. Please note that installation involves relocating the windshield washer nozzles to accommodate the gurney flap. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

    Learn More

  81. Roadster V-Special (NA) JDM Emblem

    Roadster V-Special (NA) JDM Emblem

    $89.99
    Original "V-Special" badge from JDM (Japan-spec) 1989-1993 NA Mazda Roadster. It's a beautiful emblem made to go in the middle of the front bumper of a NA instead of a Mazda logo. Learn More

  82. Eunos (NA) JDM Badge

    Eunos (NA) JDM Badge

    Regular Price: $44.99

    Special Price $34.99

    Original "Eunos" emblem from JDM (Japan-spec) 1989-1997 NA6CE/NA8C Mazda Roadster (this usually look great combined with the Roadster JDM Badge). It's a nice way to show you like the JDM version of the Roadster. Learn More

Grid  List 

per page
Set Descending Direction

Items 11 to 92 of 82 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5