Product made by Jet's (Integral Kobe). The fender canards is a new product they tested and built at the track. They liked the look and gains from it, so they decided to offer it to the public. It generates downforce by controlling the flow of air to the fenders and improve stability at high speed as well as cornering. Learn More

Product made by Jet's (Integral Kobe) for the MX-5 NC-1 and NC-2 (06-12). The master spec canards are made to flow well with the lines of the vehicle and add downforce (track tested). It'll work most efficiently at high speed and while cornering. Learn More

Front Lip made by Jet’s (Integral Kobe) for 2009-2012 NC MX-5s that is made with their special 3D wing shape. The 3D wing shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More

Front Lip made by Jet’s (Integral Kobe) for 2006-2008 NC MX-5s that is made with their special 3D wing shape. That specific shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More

Set of fenders made by Jet’s to fit NC chassis MX-5. It’s designed with downforce in mind and to add cooling efficiency to the engine bay. It also follows the lines of the NC quite well. It is possible to re-use OEM tube liners (fender guards) inside of these fenders (some cutting into them is needed due to the duct). In order improve engine cooling more efficiently, cutting to the fender guards need to be done (can be done with scissors). Learn More

Side deflector made by Jet’s in JAPAN. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more aerodynamic. Learn More

Rear deflector made by Jet’s in JAPAN. Adds some aggressive touch to the rear end of the vehicle. It will also make the car more aerodynamic. Learn More

Best sounding exhaust from JAPAN made by Jet's. Known as one of Japan's sportiest sounding exhaust for NB Miata. This exhaust gives a really nice sound to NB8C engines. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

Springs made to fit onto OEM ND (2016+) Suspension to offer a more sporty handling, keep vehicle's balance and lower the ride height. It lowers the vehicle about 30mm in the front and 25mm in the rear. You can read our blog post about track results from these springs!

Learn More

Front Lip made by Jet's Integral Kobe for the 2016+ ND Miata. It's made to flow perfectly with the OEM canards, but also made to improve downforce. It also contributes to help high speed stability of the vehicle. Learn More

Exhaust with angled tip made by Jet’s for the NA (1989-1997) Miata with either 1.6L or 1.8L. It is made for the street use, but will still give your vehicle a nice high pitch sound when accelerating. Learn More

Due to the popularity of NA & NB N1 Spec Mufflers, Jet’s released the NC (2006-2015) version. It’s made to give a high pitch sound to the MZR engine during heavy acceleration. The look of this exhaust is superb with the single tip and angled muffler, it’ll sure turn heads. Learn More

Exhaust system for the ND (2016+) Miata made by Jet’s. This single exit muffler looks fantastic and has the racy exhaust note that Jet’s exhaust kits are known for. Jet’s has been working on this kit for a while and has done significant testing to get the perfect exhaust note as well as power gains. Learn More

Sports exhaust for the NB Miata made by Jet’s Integral Kobe. This muffler uses a unique pipe layout to create the signature Jet’s high pitch exhaust note, while keeping volume at a lower level. This muffler has the Jet’s logo on the tip. A great muffler for street use! Learn More

Sports exhaust kit made by Jet’s of Japan for the 1989-1997 NA Miata. This exhaust kit is a part of Jet’s Beat Sound line which combines the superb exhaust pitch that Jet’s is known for with a milder volume. Jet’s tried out different piping layouts in order to retain a great sound even at a lower volume than their N-Zero line. Learn More

Sports muffler made by Jet’s of Japan for the NC Miata. This exhaust utilizes a twin loop design and a single tip to create a pleasant exhaust with the signature exhaust note and pitch that Jet’s is known for. A great looking exhaust with a great exhaust note! Learn More

Front lip spoiler made by Jet's for the 2016+ ND MX-5. It is made with function in term of first priority and then with a form that follows the vehicle's aggressive lines. It is designed for race (more downforce) and to avoid scraping on the ground too easily. Learn More

Duck Tail Spoiler made by Jet's for the 2016+ ND Miata. It is made to ensure the maximum downforce is provided using this kind of design for rear spoiler. It goes as far as possible on the edges to make the best improvement to the aerodynamics of the vehicle as possible. Learn More

Front Spoiler (Air Dam) made by Jet’s (Integral Kobe) for 2013-2015 years NC3 MX-5 that is made with their special 3D wing shape. The 3D wing shape is made to be 100% functional and was tested on track to be sure it works. It’s made to both enhance down force and improve cooling to the engine bay. Learn More

3D design front canards for the NC3 (2013-2015) MX-5 designed by Jet's Integral Kobe to provide extra downforce during circuit racing. They improve performance during cornering and give more stability to the car at high speed. Learn More

Exhaust (axle-back) made by Jet’s Integral Kobe of Japan for the 1.5L or 2.0L ND MX-5. This exhaust is perfect for street cars that want a beautiful high pitch sound at high RPM and low drone under normal driving conditions. The exhaust has absolutely no raspiness and will make head turns. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

Jet's Integral Kobe has always been designing some impressive and functional aerodynamics. Their NB1 (1998-2000) Front Lip Spoiler is no different. This is the design that has been used for their "Battle Version" NB which got tested over and over at the circuit. Sorry for the bad pictures, better pictures will come later. Learn More

Jet's Integral Kobe has always been designing some impressive and functional aerodynamics. Their NB (1998-2005) Side Skirts is also part of their awesome products. This is the design that has been used for their "Battle Version" NB which got tested over and over at the circuit. Learn More

Jet's Integral Kobe has always been designing some impressive and functional aero. Their NB (1998-2005) Rear Skirt (Lip) is also part of their awesome products. This is the design that has been used for their "Battle Version" NB which got tested over and over at the circuit. Learn More

Emission friendly exhaust manifold by Integral Kobe for NB2 (2001-2005) Mazda Miata/MX-5. Emissions has gotten stricter and cars must pass inspection even at a cold start. For that to happen the catalytic converter had to heat up quickly so they were placed very close to then engine. This greatly restricted air flow and limited the engines performance. With trial and era a 4-2 layout exhaust was created to maximize airflow while still being able to warm up the catalytic converters fast enough to pass inspection. Ideal for those daily drivers that want maximum performance while still having peace of mind of staying legal. Please note that this will only be compatible with NB with serial code of 300000 ~ and more (called NB3 in Japan). Please contact us if you are not sure it will fit. Learn More