Tail lights made by Esqueleto in Japan. These will fit from 1998 to 2005 NB MX-5s. It's made from quality FRP and will improve the vehicle's safety as it'll be more visible at daytime, night and during bad weather. Reflector (round) is included with the tail lights. It is complete with wiring connectors, bulbs and everything to be plug and play. Learn More

Tail lights made by Esqueleto in Japan. These will fit from 1989-1997 NA Miatas. It's made from quality FRP and will improve the vehicle's safety as it'll be more visible at daytime, night and during bad weather. Reflector (round) is included with the tail lights. It is complete with wiring connectors, bulbs and everything to be plug and play. Learn More

Tail lights made by Esqueleto in Japan. These will fit from 2006 to 2015 NC MX-5s. It's made from quality FRP and will improve the vehicle's safety as it'll be more visible at daytime, night and during bad weather. Reflector (round) is included with the tail lights. It is complete with wiring connectors, bulbs and everything to be plug and play. Please note that this piece was designed for NC1. If used on NC2/NC3, there will be a small gap near the edge of the trunk. Please see photos by scrolling down. Learn More

This seat has been made especially for the NA & NB Miata (1989-2005) to be 100% sure there are no modification nor interference when installing it in the 2 seater. The shell is made out of low-rebound urethane for great comfort and support to the entire body. It’s made to reduce long-distance driving fatigue and still be comfortable. By using the dedicated seat side brackets, you can install the seats onto your OEM seat rails without any modification. Learn More

Esqueleto based the shape on the original M2-1028 seat and has been made especially for the NA & NB Miata (1989-2005). It comes with removeable back and bottom cushions for extra comfort. They made it to be 100% sure there are no modification nor interference when installing it in the 2 seater. The shell is made out of low-rebound urethane for great comfort and support to the entire body. It’s made to reduce long-distance driving fatigue and still be comfortable. By using the dedicated seat side brackets, you can install the seats onto your OEM seat rails without any modification. Learn More

This seat has been made especially for the fourth generation ND Miata (2016+) to be 100% sure there are no modification nor interference when installing it in the vehicle. The shell is made out of low-rebound urethane for great comfort and support to the entire body. It’s made to reduce long-distance driving fatigue and still be comfortable. By using the dedicated seat side brackets, you can install the seats onto your OEM seat rails without any modification. Learn More

The Esqueleto Type 3 seat is based on the Type-1, but with extra room inside the shoulder (40mm) and waist area (10mm). It has been made especially for the NA & NB Miata (1989-2005) to be 100% sure there are no modification nor interference when installing it in the 2 seater (only interference is when opening and closing center console and left shoulder will interfere with lining a bit during sliding or the seat). The shell is made out of low-rebound urethane for great comfort and support to the entire body. It’s made to reduce long-distance driving fatigue and still be comfortable. By using the dedicated seat side brackets, you can install the seats onto your OEM seat rails without any modification. Learn More

Rear trunk spoiler made by Esqueleto for the ND (2016+) MX-5 Miata. It is possibly the nicest looking trunk made for the ND chassis so far. It's made of 3 pieces to give a much wider look without making the trunk opening wider. Please note that installation requires drilling holes into the trunk. Learn More

Front spoiler made by Esqueleto for the 2016+ ND MX-5. It has a very aggressive look and includes front aero vents & vertical diffuser. The front lip is available in both Carbon Fiber (bottom) with FRP or just FRP. Please note that installation requires drilling holes into the bumper. Learn More

Side skirt made by Esqueleto for the 2016+ ND Roadster. It has a very aggressive look and is available in both Carbon Fiber (bottom) with FRP or just FRP. Please note that installation requires drilling holes into the bumper. Learn More

Rear lip made by Esqueleto for the 2016+ ND MX-5. It has a very aggressive look and totally changes the look of the back of the car. The rear underspoiler is available in both Carbon Fiber (bottom) with FRP or just FRP. Please note that installation requires drilling holes into the bumper. Learn More

Rear spoiler made by Esqueleto for the ND (2016+) MX-5 Miata. It follows really well the lines of the ND and does not hide the lighting coming from the third brake line. Learn More

Roof fins (spoiler) for the ND MX5 RF (2016+) made by Esqueleto to give the vehicle a much more aggressive look. It comes in a nice satin black finish and installs using only double-sided tape. Learn More

Rear (Ducktail) Spoiler made by Esqueleto for the 1998 to 2005 NB MX-5 Miata. This spoiler gives the NB a longer look and follows the lines very nicely. It also has the cutout for third brake light, making it legal in most countries! Learn More

The Clima Rear Spoiler made by Esqueleto for the NC (2006-2015) MX-5 Miata follows lines of the vehicle perfectly. It does not hide the lighting coming from the third brake light. Learn More

The Type-3 Rear Wing by Esqueleto is made for the ND (2016+) MX-5 Miata with Soft Top and RF. It comes with a 3rd brake light relocator and panel cover to give the trunk a smooth finish. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

Front Lip Spoiler (Skirt) made by Esqueleto for the NC1 (2006-2008) MX-5 Miata. It’ll give an aggressive and sporty look to the front end of the car. Learn More

Side Steps (Skirts) made by Esqueleto for the NC (2006-2015) MX-5 Miata. It’ll give an aggressive and sporty look to the side of the car while making it look lower as well. Learn More

Rear Lip (Half Spoiler) made by Esqueleto for the NC (2006-2015) MX-5 Miata. It’ll give an aggressive and sporty look to the back of the car while making it look lower as well. Learn More