AVO Stage 1 Turbo Kit

Home
AVO Stage 1 Turbo Kit

Double click on above image to view full picture

More Views

AVO Stage 1 Turbo Kit

https://rev9autosport.com/avo-stage-1-turbo-kit.html 4839.9900 USD Out of stock

Availability: Out of stock

Regular Price: $4,909.99

Special Price $4,839.99

Product Description

Stage1 Turbo Kit made by AVO Turboworld for the 2016+ ND MX-5 (2.0L Engine). It is made for those who want a full turn-key solution including ECU and base tune. The kit made by AVO, unlike other manufacturers, has a nice OEM quality look. 4 months and over 10,000km of testing plus countless hours of tuning resulted in this solid and reliable kit. It has been tested with fuel grades from countries all over the world to ensure it's really reliable (USA was tested with 91 octane). AVO testing at 5~6 psi on 91-octane gas in USA produced 210 whp (247 crank hp) and 210 ft/lbs of torque (using the Stage 2 kit)! Want more information? Check out their Press Release!

DISCONTINUED AND NO LONGER AVAILABLE. AVO Stage 1 Turbo Kit should be ordered at REV9 Autosport https://rev9autosport.com/avo-stage-1-turbo-kit.html as they provide the best service and speed we've seen so far!

Add to Wishlist

-Bolt-on kit
-Provides 40% power increase over stock
-No modifications needed for install
-Comes with AVO Power + Plug and Play Reflash Tool
-Top quality product from AVO Turbo World
-Comes with OEM Style BOV
-Comes with Panel Filter
-Compatible with i-Eloop equipped vehicles
-Only available for 2.0L ND MX-5 (2016+)

STAGE1 KIT INCLUDES
AVO 18/49 Turbocharger with Ceramic Coating
AVO Stainless Steel Cast Exhaust Manifold with Ceramic Coating
AVO Water and Oil Hosing & Fittings.
AVO Stainless Steel Front pipe with Ceramic Coating
AVO Bar & Plate Front Mount Intercooler with Reinforced Silicone Hosing & Powdercoated Steel Piping
AVO OEM BOV Kit
AVO Air Box Top Lid with AVO Drop-In Air Filter
AVO Power + Plug and Play Reflash Tool (Includes stock MAP, Valet & 4 MAPS) (or EcuTek)

INSTALLATION
Under normal conditions this kit can be installed in 7-8 hours from start to finish. This job is much easier to perform using a lift and proper tools. One of the hardest portions of this install is removing the stock header. You’re required to remove the engine mounts which will make installing the turbo kit much easier. Any installation shop will need the ability to weld the turbocharger oil drain fitting (return line) into the oil pan. The only modification to any OEM part is to the plastic under tray beneath the engine. It needs two 2.5” holes to be cut with a box knife or cutting tool. This will allow proper fitment of the silicone intercooler pipes. Other than that, the installation is straight forward for most independent technicians or DIY’s.

Free Shipping	No
Featured	No
Country of Origin	No

ESTIMATE SHIPPING COST

* Country
Include Cart Items
Yes No

Questions on AVO Stage 1 Turbo Kit

From Joe S at 5/18/2017 12:54 PM
- Is this kit designed for manual and automatic transmissions?
- Hello,
  
  AVO has confirmed that the kit will fit a car with an automatic. Below are 3 things that the manufacturer recommends if you purchase this kit for an automatic transmission.
  
  "1, First thing install the AVO Power+ ECU and get the data to me as quick as possible as I will need a week to build a AT Map.
  
  2, Fit a Automatic cooler to the car when installing the Turbo kit (it helps a lot on the AT cooling and engine cooling and gives clearance for the LHF intercooler pipe.
  
  3, There is one Extra part you will need is a relocation bracket for the idle stop model. This is sold separate I will get a part number price for you if you decide to order."
  
  Thanks!
- Do you find this question helpful? Yes No