Wind blocker made by Mazdaspeed in Japan for the 2016+ ND Miata. It's a great add-on for those who enjoy driving with the top down all the time, have less wind going into the cabin and still keep good rear view visibility. Learn More

Front Fender Ducts made by Odula for the 2016+ ND MX-5 Miata. Since the inside of the front fender/wheel arch tends to have positive pressure, installing this piece will reduce resistance by releasing the pressure. It’ll lower the heat in the wheel arch and drop the temperature of the break pads, making them last longer. This piece has been tested in endurance racing (Super Taikyu) and proven to help performance of the car under heavy use. Learn More

Front Bumper Grille made by Odula for the 2016+ ND MX-5. It widens the opening of the front bumper allowing for more air. Odula claims that the water temperature drops by about 5 degrees after running this front grille. Learn More

The Odula Front Diffusers (Lip) Garnish are meant to be installed over the factory ones from 2016+ ND MX-5 Miatas. They are available in FRP (unfinished) and Carbon Fiber. They have a slightly more aggressive shape than the OEM ones. Learn More

License plate relocator made of FRP by Odula with function in mind. It has an integrated intake that brings air towards the air intake in the engine bay. Relocating the license plate also gives more airflow to the radiator! Learn More

Aggressive looking rear bumper diffuser made of by Odula for the ND (2016+) Miata. It has fins that are made to improve aerodynamics at high speed and will also make the rear end of the car look lower. The exhaust clearance is not really affected by installing this product. Learn More

A security license plate bolt from Kics Racing Gear to add style and deter theft that will fit on ALL YEARS Mazda Miata. The Kics Leggdura License Plate Bolts use a unique shape to help improve security against theft. The Leggdura Plate Bolts also feature an aluminum knurled finished cap to enhance the exterior look of the vehicle. Kics Leggdura License Plate Bolts are available in four colors, red, blue, gold, and black. Each set comes with 4 aluminum caps, steel bolts, and Leggdura logo emblems. The HEX security lock tool is also included to make for easy installation. Learn More

A license plate bolt set for added security from Kics Racing Gear for ALL YEARS Mazda Miata. The Kics License Plate Bolts are a four piece exterior dress up hardware designed to secure the license plate with a stainless steel, Torx shape. The Kics License Plate Bolts are offered in a black chrome finish with silver logo treatment on top. All kits come with both the washers and bolts, as well as, the specialty Torx L-Shaped tool. All bolts are 21mm overall height, with 15mm available thread, please check the depth of your license plate before purchasing. Learn More

Front diffusers with end lip made by Rallybacker for the 2016+ ND MX-5 Miata. It follows the shape of the car nicely and replace the factory front diffusers with some wider ones that also have an end lip to make the car look wider and bolder. Learn More