You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
Browse By
- Category
-
- Exhausts (29)
- Intakes (18)
- Cooling (18)
- Dress Up (28)
- Electronics (7)
- Forced Induction (0)
- Mounts (2)
- Headers (4)
- Oil Filter & Caps (12)
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Engine
-
Mazdaspeed Radiator Cap
$74.99Product from JAPAN made by Mazdaspeed. One of the best radiator cap on the market. Learn More
-
Odula R-Spec Muffler
$974.99Axle-back exhaust made for ND Roadster. Made of glass-pack SUS304 with a titanium tail, it’s one very high quality exhaust. It has 60mm diameter piping and tip has 100mm diameter. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Odula High Flow Intake
$199.99Silicon intake made by Odula for 1.5L & 2.0L ND Roadster. It’s made to improve air going to the intake and increase engine response. Learn More
-
Mazdaspeed Oil Filler Cap
$104.99Oil Filler Cap made by Mazdaspeed designed especially for the ND MX-5 (2016+). It has a beautiful look and it’s a great way to improve engine bay look. Learn More
-
Odula License Plate Intake
$234.99License plate relocator made of FRP by Odula with function in mind. It has an integrated intake that brings air towards the air intake in the engine bay. Relocating the license plate also gives more airflow to the radiator! Learn More
-
Autoexe Sports Exhaust (Dual Center Exit)
$1,349.99Gorgeous dual muffler by Autoexe for the ND 2016+ Miata. This kit gives the car a very sporty look and a superb exhaust note. The muffler utilizes a glass wool muffler and a straight through silencer to reduce backpressure and enhance the exhaust sound. It is HIGHLY recommended to install this together with the Autoexe Rear Diffuser. Otherwise modifications may be required to the stock rear bumper to make this fit.
Learn More
-
Autoexe Oil Filler Cap
$94.99Handsome oil filler cap made by Autoexe for your ND Miata. This cap is made of durable aluminum and is anodized in a deep red color. A great accessory for your engine bay! Learn More
-
Autoexe Sports Oil Filter
Regular Price: $44.99
Special Price $39.99
High efficiency oil filter made by Autoexe of Japan for the ND (2016+) Miata. This oil filter offers superior filtration that is able to capture particles just 10 microns in size. Additionally it is equipped with a high powered magnet to also trap small metal pieces. Learn More
-
Mazdaspeed Induction Sound Enhancer
Regular Price: $299.99
Special Price $199.99
Intake sound enhancer made by Mazdaspeed. This pipe connects the intake to the cabin to enhance the sound of the engine in the cockpit. This will make your Miata sound very sporty from the cabin. Learn More
-
Fujitsubo Authorize-S Muffler
$899.99Nice dual muffler by Fujitsubo for the ND 2016+ Miata. This kit gives the car a very sporty look and a superb exhaust note. The muffler improves performance (hp and torque) and also is very shiny and improves the look.
Learn More
-
Fujitsubo Authorize R Exhaust
$814.99Nice single tip muffler by Fujitsubo for the ND 2016+ Miata. The Authorize-R gives the car a racing look and sounds very sporty. The muffler improves performance (hp and torque), even on the 1.5L engine!
Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Odula Silicone Radiator Hose Kit
$374.99Silicone hose kit made by Odula of Japan. This kit replaces the stock rubber hoses on the ND Miata and slightly increases cooling capabilities. Additionally it does not expand as much as rubber hose during high heat applications. Looks great too!! Learn More
-
Carbing Radiator Cap
Regular Price: $49.99
Special Price $44.99
High pressure radiator cap made by Carbing for all years MX-5 Miatas. It raises the boiling point of the cooling liquid to improve the cooling efficiency. Learn More
-
Fujimura Gentle Sound Exhaust
$699.99The Gentle Sound Muffler made by Fujimura-Auto is made for the ND (2016+) Miata and is a bolt-on modification. It is more than 50% less heavy than OEM (only weights 3.3KG versus 9.3KG!). The piping diameter is 60mm and the tail is 80mm. Check out our review of the exhaust as well as the installation process.
Learn More
-
Koyo Red Radiator Cap
$49.99Radiator Cap made by Koyo in Japan for the NA, NB, NC & ND MX-5. It adds a nice red touch to the engine bay. Learn More
-
Suruga Speed Connecting Pipe
$1,649.99Beautiful center exhaust pipe for then ND Miata made by Suruga Speed. Constructed of stainless steel, the pipe was designed to reduce bends and curvature of the stock pipe. This pipe replaces the pipe immediately following the catalytic converter. Bolts up to stock or other aftermarket exhaust pieces. Learn More
-
Suruga Speed Loop-Sound Muffler
$2,599.99Gorgeous muffler for the ND (2016+) Miata made by Suruga Speed of Japan. This exhaust will add a hearty sports car bark to your ND Miata. Sounds relatively mild until the higher RPMS, when it really opens up! By utilizing the loop system, this exhaust is able to attain a deeper note. Learn More
-
HKS Radiator Cap
$59.99Radiator Cap made by HKS specifically Mazda's Roadster. It’s a 1.1kgf/cm2 so it’s very safe to run on OEM radiator and hoses. Learn More
-
NOPRO High Flow Intake Elbow
$199.99Intake hose for the ND (2016+) Miata made by NOPRO of Japan. This super smooth intake hose replaces the stock corrugated pipe to help smooth out the intake path. It also looks great in the engine bay! Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
LegSport Titanium Exhaust
$2,499.99Lightweight titanium axle-back exhaust for the ND (2016+) MX-5 made by Leg Motorsport of Japan. The Club-Sport muffler utilizes a twin loop muffler in order to get a sporty exhaust note. This exhaust also has a great looking burnt tip! Learn More
-
Odula Titanium Exhaust Wrap
$124.99-Useful for wrapping a manifold or cat-back system -Keep your exhaust gasses at a higher temperature -Great for racing Learn More
-
Odula 1.5L Racing Header
$2,449.99-SUS304 stainless steel -4-2-1 type header -180 cpsi catalytic converters -Made in Japan -No check engine light -Only available for the ND (2016+) Miata with Manual Transmission (MT) Learn More
-
Integral Kobe N-Zero Spec Muffler
$974.99Exhaust system for the ND (2016+) Miata made by Jet’s. This single exit muffler looks fantastic and has the racy exhaust note that Jet’s exhaust kits are known for. Jet’s has been working on this kit for a while and has done significant testing to get the perfect exhaust note as well as power gains. Learn More
-
Autoexe Ram Air Intake
Regular Price: $1,299.99
Special Price $1,199.99
Ram air intake system made by Autoexe of Japan for the ND (2016+) Miata (1.5L and 2.0L engine). This beautiful kit is the epitome of form and function, designed to both increase power and look great under the hood. This kit positions a duct where air can be force fed in to the intake system, increasing power. The air box is made of carbon fiber and houses a reusable K&N air filter. This item is produced in collaboration with GruppeM so please expect the highest quality intake you ever saw. The 1.5L and 2.0L intake design are slightly different. Please note that the ND 2.0L USA & Canada customers *may* require cutting in bumper reinforcement (aluminum), it is not noticeable from the outside and takes 5 minutes to do. Learn More
-
ARC Type-A Radiator Cap
Regular Price: $74.99
Special Price $59.99
Rare radiator Cap made by ARC in Japan for the NA, NB, NC & ND MX-5 (as well as other vehicle models). It adds a nice classy touch to the engine bay. This is a re-run which means we've asked ARC to re-make a discontinued product for REV9 Autosport. Once the 50 radiator caps are gone, there will be no more of them. Please check the back of your radiator cap before ordering. We are selling the Type-A (as pictured on the graphic). If yours is Type-B, we do not offer it. Learn More
-
Kakimoto Racing KR Muffler
$999.99Gorgeous rear section exhaust made by Kakimoto Racing of Japan for the 2016+ ND Miata. The Class KR lineup is designed to increase power without raising sound levels to an unreasonable level. The muffler has dual tips that are finished in a titanium burnt blue color with a slash design. Learn More
-
HKS Legamax Premium Exhaust
$974.99Legamax exhaust made by HKS of Japan for the 2016+ ND Miata. HKS wanted to make a kit that not only sounded great, but also looked great too. To this end, they adjusted the positioning of the muffler in order to position it closer to the bumper for a more flush appearance. This muffler has dual black-chrome tips. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Fujimura Special Edition Exhaust
$854.99The Titanium-tip Limited Edition Gentle Exhaust made by Fujimura-Auto is made for the ND (2016+) Miata and is a bolt-on modification. It is more than 50% less heavy than OEM (only weights 3.3KG versus 9.3KG!). The piping diameter is 60mm and the tail is 80mm. Learn More
-
Carbing Oil Catch Tank
$299.99Oil catch can designed for exclusive use with the ND (2016+) Miata by Okuyama Carbing. As with other catch tank designs, this tank will trap carbon, sludge and other impurities. Carbing offers a unique take on this by having not only a level gauge standard, but also a drain bolt for easy maintenance. Carbing has made this kit out of anodized aluminum for a combination of light weight as well as durability. This kit is designed for use with the ND Miata and as such, includes all hardware and instructions for an easy bolt on installation. Learn More
-
Leg Sport Washer & Oil Catch Tank Combo
$499.99Unique washer fluid tank and catch can combination made by Leg Sport for the 2016+ ND Miata. This installs in place of the OEM washer tank and retains use of the stock washer fluid motor. Integrated into the tank is the catch tank, which has an included level to easily see the current level of captured sludge and blow by gasses. Please note that this item will remove the "Low Washer Fluid" function of the car. Learn More
-
Fujimura Dual-Sound Muffler
$1,649.99The Dual Sound Exhaust made by Fujimura Auto is designed for the ND (2016+) MX-5 and is a bolt-on modification. It comes with a switch and vacuum cable to put the exhaust in low noise mode or racing mode. It's an amazing feature so that when you are racing the car, all the possible airflow will leave the exhaust with about 104db maximum (loud), but when you want to relax and do city driving, the maximum noise level will be 94db. It does look super good with its dual-tip titanium tips! Installation of the exhaust is about ~5-10 minutes and installation of the vacuum and on/off switch is about ~30 minutes. Learn More
-
Autoexe Premium Tail Muffler
$817.99Premier muffler made by Autoexe of Japan for the ND (2016+) MX-5 Miata. Autoexe designed this new exhaust to be a muffler more mature and sophisticated in appearance. Additionally the sound that it creates is more so gentle. Although it is a quieter exhaust (not too loud), you can still expect to have enhanced throttle response and a sportier exhaust note from the mufflers straight-through silencer. On top of that, the all stainless steel construction will look great on your Miata! Learn More
-
Carbing Underpanel Kit
$399.99Stylish and functional under panel kit made by Carbing for the 2016+ ND MX-5. Carbing used lightweight and very thin aluminum to craft the panels. The panels feature sets of louvers that will help direct airflow to reduce air turbulence under the car at speed as well as provide some extra downforce. Additionally, the Ver. 1 panel will help provide a cooling effect to the engine bay. The complete kit is comprised of their Ver. 1 and Ver. 2 panels. The Ver. 1 panel goes at the very front of the vehicle. The Ver. 2 panel goes directly behind it. Keep in mind that this panel is recommended to be used in conjunction with Carbing Front Frame Bar. Learn More
-
RS Factory Stage Connecting Pipe
$599.99Race mid-pipe by RS Factory Stage for the ND Miata. This pipe will replace the center section between the muffler and the exhaust manifold, to further increase power of your roadster! RS Factory Stage elected to use stainless steel for the pipe, and installs without any welding or cutting. Installation of this pipe will increase the sound level of your ND a noticeable amount, but RS Factory Stage finds the sound increase bearable. Additionally, while RS Factory Stage currently does not have concrete dyno figures for power increase, RS Factory Stage states the difference is one you will be able to feel! DISCONTINUED AND NO LONGER AVAILABLE. Learn More
Out of stock
-
Paddock Dual Center Muffler
$1,899.99Exhaust system with dual exit made by Paddock Style from Japan for the 2016+ ND MX-5. This exhaust is hand made by skilled builder in Japan. It has dual 80mm diameter stainless steel tips with a titanium finish. The sound of this exhaust is incredible and sounds awesome especially at 6000RPM! It is made to be used with Autoexe Rear Diffuser. Learn More
-
Rowen Quad Tip Exhaust System
$1,567.99Beautiful quad pipe muffler system made by ROWEN in Japan for the 2016+ ND Miata. The kit has incredible details and can be used with the OEM rear bumper. Some very slight cutting into the OEM rear diffuser is required to fit the left exhaust side. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Rosso Modello Colbasso Ti-C Exhaust
$699.99Exhaust from Rosso Modello for the ND (2016+) MX-5 Miata. This gorgeous muffler is made of SUS304 stainless steel and is available with your choice of titanium tips in an assortment of colors. The muffler has a sporty sound to match its great looks, with a deep tone that isn’t too loud (90db at 5250 RPM). Not compatible with cars equipped with i-ELOOP or i-STOP. Also those with rear aero parts may have problems with fitment. Learn More
-
Leg Sports Carbon Cooling Grille
$699.99Bring up some fresh air to the engine bay and radiator by using the Leg Sport Cooling Grille for the 2016+ ND MX-5 Miata. It's made of a combination of carbon fiber and mesh to give the vehicle a much more aggressive look while still keeping weight low and being functional. The optional ram air intake guide will bring fresh air directly into the airbox for maximum efficiency. Learn More
-
Autoexe Sports Induction Box
Regular Price: $399.99
Special Price $324.99
Sports induction intake kit from Autoexe of Japan for the 2016+ ND MX-5 Miata. Autoexe designed these kits to increase sound and engine response along with it. The kit interfaces with the rest of the OEM intake kit and replaces the OEM airbox with an FRP filter frame in Autoexe’s signature red. Along with it comes both a quality K&N filter and an aluminum heat shield. Installs easily using hand tools in about an hour. Please note that when installed, you cannot see the induction box because it's facing towards the ground. However, you can definitely hear it. Learn More
-
Leg Sport Resonator Cancel Cap
$84.99Sound enhancer removal cap made by Leg Sport of Japan for the 2016+ ND MX-5 Miata. This cap is designed for those who wish to bypass the intake resonator and change their induction sound. Leg Sport claims with this cap that by bypassing using their cap, it will smooth out the induction noise and also provide a mild increase in throttle response. Learn More
-
Leg Sport High Flow Elbow Intake
$209.99Intake suction kit for the ND (2016+) Miata made by Leg Sport of Japan. This super smooth intake hose replaces the stock corrugated pipe to help smooth out the intake path and provide a better airflow. It also looks great in the engine bay! Learn More
-
Autoexe Intake Suction Kit
Regular Price: $239.99
Special Price $199.99
Elbow intake for the ND (2016+) MX-5 made by Autoexe of Japan. This super smooth intake hose replaces the stock corrugated pipe to help smooth out the intake path and provide a better airflow & throttle response by reducing air resistance (scroll down for animated image). It also looks awesome in the engine bay! Learn More
-
Garage Vary Emblem Duct
$349.99Emblem Ram Air Intake made by Garage Vary for the 2016+ ND MX-5 Miata. It’s made to provide extra airflow to the intake and a small power gain at the same time by directing cold air directly to the intake. You can read this review for technical gains from this item : Garage Vary Emblem Intake Shows Power Gains! Learn More
-
Autoexe Air Filter
Regular Price: $109.99
Special Price $94.99
Dry type air filter made by Autoexe of Japan for 2016+ ND MX-5. This filter installs into the stock airbox and offers decreased airflow resistance for a slight bump in power. An easy and cost effective mod for your ND Miata! Works with both 1.5L and 2.0L engine! Learn More
-
Nielex M2-Type Oil Cap
$114.99Classic looking oil filler cap made by Nielex for your NC (2006-2015) or ND (2016+) Miata. This oil cap is made to the similar specs as the one we could find in the past in the M2-1002 vehicles. It has a beautiful polished top and very detailed side grip pieces. It's an artsy piece for those who pay attention to detail of their engine bay! Learn More
-
Integral Kobe N1 Spec Type-US Muffler
$899.99Exhaust (axle-back) made by Jet’s Integral Kobe of Japan for the 1.5L or 2.0L ND MX-5. This exhaust is perfect for street cars that want a beautiful high pitch sound at high RPM and low drone under normal driving conditions. The exhaust has absolutely no raspiness and will make head turns. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
JoyFast Oil Cooler Kit
$849.99The JoyFast Oil Cooler was designed especially for the ND (2016+) MX-5 Miata (1.5L and 2.0L version available). It’s made to keep temperature of oil to a lower level so the car will keep its reliability, even at high temperature. This part will be useful mainly for those who race the car for a long time as the high RPM and track temperature can become an engine safety issue for the ND Roadster. Track testing at 28 degrees Celcius air temperature : OEM (circuit racing) : Oil temperature : 130 degrees With Oil Cooler (circuit racing) : Oil temperature : 105 degrees TEMPORARILY UNAVAILABLE. Learn More
Out of stock
-
Beatrush Underpanel (Undertray)
Regular Price: $274.99
Special Price $244.99
Aluminum replacement underpanel made by Laile (Beatrush) for the 1.5L and 2.0L ND MX-5. The underpanel will improve downforce of the vehicle and dissipate heat from the engine bay when driving at high speed. Learn More
-
S2 Racing Engine Cover
$274.99Painted engine cover made by S2 Racing of Japan for the ND MIata. The engine cover is easily removed and these offer a quick and easy way to dress up your Miata. The covers are painted in a unique finish that comes in a variety of colors. This is a replacement, it does not go over the OEM one. It fits both 1.5L and 2.0L engines. Learn More
-
Beatrush Super Oil Filter
Regular Price: $44.99
Special Price $39.99
The Beatrush Oil Filter is made to ensure your high performance engine (1.5L, 1.6L, 1.8L or 2.0L from NA, NB, NC or ND Miatas) will withstand daily and racing abuse. It has good flow rate, efficient filtration, low resistance and it's light weight + compact on top of that. Learn More
-
Odula Engine Mount Spacers
$89.99Urethane engine mount spacers made for the 1.5L and 2.0L ND MX5 Miata. It’s made to improve the shifting feeling and prevent mis-shift during racing. The hard rigidity version will add slight vibration at idling, but will improve shift feeling more. The soft rigidity version will virtually not add any vibration (just slight one during fluctuation of the engine) and improve shift feeling and comfort. Please note that one picture shows the product and the other picture shows the product installed. Learn More
-
Zeromotive Titanium-look Exhaust Tips
$124.99Muffler tips made out of stainless steel (burned) that give a nice titanium look to your 2016+ ND MX-5 tail pipes. Installs very easily using clips (no drilling/bolting needed). Learn More
-
JoyFast DSC OFF Kit
$104.99Tired of always disabling and re-disabling the Traction/Stability Control (DSC) during racing? JoyFast came up with a low cost module to disable the function fully, so it doesn’t go back when you hit a corner too hard. Learn More
-
Mazda Sound Enhancer Delete Tube
$59.99This is the OEM Mazda Intake Tube for the ND (2016+) MX-5 Miata without the sound enhancing tube. This intake tube comes with the cap to allow removal of the sound enhancing tube (which can also be used with aftermarket silicon intake. Learn More
-
R-Magic Power Coils
$774.99R-Magic now offers some upgraded engine coils for the ND (2016+) MX-5 Miata with either 1.5L or 2.0L engine. This small modification helps improve engine output (power) in the whole RPM range. On a 1.5L engine with no ECU tuning 3.3hp gains were seen from R-Magic. It prevents misfire and knocking as well. Please note that the new version of Power Coils is now RED color (see images). Learn More
-
Garage Vary Downforce Underpanel
$349.99Concave shape under panel made by Garage Vary to improve down force on the ND (2016+) MX-5 Miata. It will make the car more stable at high speed but also moves the air to the center of the radiator to create a better cooling efficiency and more stable water temperature. Learn More
-
Maxim Works 1.5L Header
$1,549.99High quality header (exhaust manifold) made by Maxim Works from Japan for 1.5 L ND (2016+) Mazda Miata/MX-5. They come in a 4-2-1 construction with the primary pipes being 34mm, the secondary being 45mm and the tailpipes coming out to 50.8 mm. Lighter then the OEM counterpart, made with high quality SUS304 TP, this item serves as an easy, bolt on weight reduction mod. With the dual catalytic converters, the torque begins to build at 2500 rpm and from 3000 rpm to rev limiter the header begin to create a higher exhaust note compared to stock. With the engine breathing better, it also creates a heightened throttle response during mid gear which are really felt during cornering as well as over takes on the freeway. It has been tested for ND2 engine (2018+), however, it will not pass emission testings in Japan. It physically fit, but it may cause a check engine light (CEL). Learn More
-
NOPRO 78 Degrees Thermostat
$84.99Thermostat by NOPRO in Japan for ND (2016+) Mazda Miata/MX-5. Made with circuit driving in mind, this thermostat was designed to withstand harsh driving conditions where temperatures can rapidly fluctuate. Opening up at 78 degrees C or about 170 degrees F, this small device ensures proper coolant distribution through the engine to maintain proper running temperatures for the ND (2016+) Miata. Being such an essential part, the thermostat was put through multiple tests before distribution to make sure that it wouldn’t fail during extreme running conditions. Upgrade to the NOPRO thermostat for peace of mind knowing that your Miata will be reliably running with proper temperatures. Disclaimer : NOPRO primarily specializes in circuit and racing activities for their team. As a result, orders placed with them may undergo a longer processing time than our usual 5-10 business days. In the event that the processing time exceeds 10 business days, we will promptly notify you to confirm your readiness for the extended wait. Learn More
-
Odula 2.0L Racing Header
$2,449.99Exhaust manifold (header) made by Odula of Japan for the NDERC (2.0L) Miata. Odula’s 4-2-1 header houses 2 high flow catalytic converters as well in order to stay street legal. This header will enhance your roadsters sound as well as a good bump in power. Couple this with a muffler for a very racy exhaust note. The ND1 model is the one with 160bhp engine and the ND2 model is the revised 180bhp engine. Learn More
-
Odula O2 Sensor Adapter
$74.99O2 sensor adapter by Odula for ND (2016+) Mazda Miata/MX-5. With aftermarket manifolds there is the chance of the check engine light coming up due to added exhaust fumes reaching the sensor then in its stock form. This adapter is a simple to install remedy to the issue that works by restricting the amount of fumes that reaches the O2 sensor. It’s made from durable steel that will be sure to outlast the sensor. Learn More
-
Leg Sport Hi-Spec 2.0L Header
$2,099.99High performance header by Leg Motor Sport for the 2.0L ND (2016+) Mazda Miata/MX-5. Emissions legal 200 cpsi high flow cat integrated in to the 4-1 design. Made with high quality 42.7 mm diameter piping, users can expect gains up to 5hp and 0.5 torque and peak torque levels reaching 1000 rpms higher than stock (without ECU tuning). This all leads to smoother and better acceleration. A simple mod for big gains. It'll fit on both Manual Transmission (MT) and Automatic Transmission (AT) vehicles. Learn More
-
Knight Sports Super Intake System
$1,149.99Super Intake System (Air Groove) for the ND (2016+) Miata (1.5L and 2.0L engine) made by legendary tuning shop Knight Sports. This intake system will provide a faster acceleration, lower air intake temperature, a bit more engine noise and awesome look to your engine bay. Learn More
-
Knight Sports Engine Oil Cooler
$1,049.99The Knight Sports Oil Cooler Kit was designed especially for the ND (2016+) MX-5 Miata (1.5L and 2.0L engine compatible). It fits in front of the OEM radiator and will provide an oil temperature that is about 10 degrees lower than the water temperature on all ranges. Learn More
-
R-Magic Air Filter
$104.99OEM replacement filter made by R-Magic for the ND 1.5L and 2.0L MX-5 Miata (2016+). This will replace your factory air filter and improve its performance as well. It’s a wet 3-layer urethane foam type. Learn More
-
Autoexe Fuel Cap Cover
Regular Price: $64.99
Special Price $57.99
Never let anyone put the wrong fuel type in your car anymore! This Red Fuel Cap Cover made by Autoexe for the ND (2016+) MX-5 Miata has a nice AUTOEXE engraved logo and installs only using 3M double-sided tape. It also comes with stickers that you can put on the cap and the fuel door hinge. Learn More
-
JUN Auto High Pressure Radiator Cap
$59.99High pressure radiator cap made by JUN Auto to give a nice touch to your MX5/Miata’s engine bay, but also helps the cooling efficiency of the system because of the higher pressure rating versus OEM unit. We recommend pairing it with an upgraded radiator and new/upgraded radiator hoses to avoid failure. Learn More
-
Cusco Engine Mounts
$374.99Steel Engine Mounts made by Cusco for the 2016+ ND MX-5. Those will help control unnecessary movement by the engine and improve the response during acceleration and traction as well. Please note that installing those engine mounts will increase the feeling of vibration of the engine inside of the vehicle. They have a reinforced rubber bushing inside to make it OK for street use. Learn More
-
Cusco Oil Level Gauge Stopper
$124.99Oil Dipstick Stopper made by Cusco for the 2016+ ND MX-5 with 1.5L engine. This will add a nice touch to your engine bay, but also it will prevent your oil dip stick from falling off. Learn More
-
Leg Sport Water Pump Pulley
$249.99Light Weight Water Pump Pulley made by Leg Sport for the 2016+ ND MX-5 with 1.5L engine. It is about 2% bigger to lower water temperature at high speed. The material used leads to a 45% reduction in weight versus the OEM piece. It is safe to run on a stock or modified/racing car. Learn More
-
JoyFast High Spark Ignition Coils
$414.99Higher voltage ignition spark coils made by JoyFast for the ND (2016+) MX-5 Miata. This product will increase the voltage of the ignition and provide more low/medium torque as well as improved acceleration. This piece has been tested on a NC car for years and has survived over 200,000KM (120,000 miles)! If your car has over 30,000KM-40,000KM it’s a recommend product to replace your OEM ones. Learn More
-
Beatrush Oil Cooler Sandwich Plate
$144.99Adapter made to fit oil lines between the engine and oil filter for the purpose of installing an oil cooler on your Miata. It’s the missing part for your DIY install! Learn More
-
Leg Sport Hi-Spec Oil Cooler
$924.99Oil Cooler Kit made by Leg Sport for the ND (2016+) MX-5 Miata. This kit will not affect the water temperature as the core is not placed in front of the radiator! It'll help keep the engine temperature lower during hot heat circuit sessions. Learn More
-
Leg Sport Hi-Spec 1.5L Header
$2,099.99High performance header by Leg Motor Sport for the 1.5L ND (2016+) Mazda Miata/MX-5. Emissions legal 200 cpsi high flow cat integrated in to the 4-1 design. Made with high quality 42.7 mm diameter piping, users can expect gains up to 5hp and 0.5 torque and peak torque levels reaching 1000 rpms higher than stock (without ECU tuning). This all leads to smoother and better acceleration. A simple mod for big gains. It'll fit on both Manual Transmission (MT) and Automatic Transmission (AT) vehicles. Learn More
-
Murakami Engine Cover
$274.99Engine Cover made by Murakami Motors for the 1.5L and 2.0L ND MX-5. It's available in orange (nice fit for the 30th Anniversary ND). For other colors, see S2 Racing Engine Cover! The wrinkle paint will give a nice touch to your engine bay for sure. The install takes just 30 seconds. Learn More
-
Autoexe Oil Stick Grip
$74.99Oil Level Gauge Grip made by Autoexe for the ND (2016+) MX-5 Miata. This machined aluminum piece will give a nice and luxury look to your Skyactiv Engine Bay. It's made to replace the mass-produced yellow resin piece with a beautiful red anodized aluminum product with the Autoexe engraved logo. This piece will look great when combined with the Autoexe Oil Filler Cap. Please note that this item may not fit with 3 point front strut bars. Learn More
-
Autoexe Oil Filler Cap
$94.99Handsome oil filler cap made by Autoexe for your third generation NC (2006-2015) MX-5 Miata. This cap is made of durable aluminum and is anodized in a deep red color. A great accessory for your engine bay! Learn More
-
SARD Racing Drain Plug Mag II
$49.99-Powerful magnet -Catches iron powder/debris -Only available for NA (1989-1997), NB (1998-2005), NC (2006-2015) & ND (2016+) MX-5 Miata Learn More
-
Odula Super Ram Air Intake RS
$524.99Ram Air Intake made by Odula for the ND (2016+) MX-5 Miata. It’s made to get fresh air from the front grille and bring it straight to the intake box. The design offers a bigger diameter than the OEM piece and catches air more directly. Compatible with both 1.5L and 2.0L engine. Learn More
-
Chargespeed Carbon Engine Cover
$259.99Carbon Fiber engine cover made by Chargespeed of Japan for the ND MIata. The engine cover is easily removed and these offer a quick and easy way to dress up your Miata. Learn More
-
Autoexe Battery Clamp
$84.99Battery Clamp (Holder) made by Autoexe for the 2016+ ND MX-5 Miata. The look of this piece is inspired by Autoexe’s Strut Tower Bars and will give a nice touch to your engine bay! Learn More
-
Blitz Racing Oil Filter
$49.99Blitz, with their proven track record of air filters now enters the oil filter game. It’s available for the NA (1.6L & 1.8L), NB (1.8L), NC (2.0L) & ND (1.5L & 2.0L) MX-5 Miata (1989+). It's designed to handle high level of pressure and heat and maximize filtration of oil. Learn More
-
KICS Magnet Drain Bolt 2
$44.99New version of the magnetic drain bolt by Project Kics for ALL YEARS Mazda Miata/MX-5. A very important part that is often overlooked but is essential for engine health. Designed so that the magnets don’t interfere with any of the engine components but still strong enough to capture any metal fragments that may make its way into the oil. Made from light alloy and finished with a heat resistant paint, It can withstand the high temperatures of the oil to insure protection during the most crucial times. This drain plug is a great way to check on engine health when draining the oil and will also help prevent a early issue from escalating into something worse. Learn More
-
Axis Parts Carbon Windshield Cowl Cover
$474.99Carbon Fiber Windshield Cowl Cover made by Axis for the 2016+ ND MX-5. These handsome, genuine carbon fiber covers install easily using 3M double sided tape and look great too! They will replace the dull and boring look of the OEM plastic cowl. Axis uses a carbon fiber reinforced plastic material that is not only light weight, but strong too. They uses a strong twill pattern that will hold up to years of use. Additionally, it is treated for UV protection, so it should not lose its luster after sun exposure. Axis also wants to make sure that it has a perfect fit in your vehicle. After they create the part, they create a master sample that they then test-fit to ensure an OEM like fit and finish. Learn More
-
Odula Titanium Hood Bar
$199.99Titanium Bonnet Bar made by Odula for the NC (2006-2015) and ND (2016+) MX-5 Miatas. It’s made of titanium and will give a very cool look when you show the engine to your friends. Please note that since this is a handmade product, the titanium gradation might not look exactly like the photos. Learn More
-
Odula Fresh Air Grille
$499.99Front Bumper Grille made by Odula for the 2016+ ND MX-5. It widens the opening of the front bumper allowing for more air. Odula claims that the water temperature drops by about 5 degrees after running this front grille. Learn More
-
RSE Full Titanium Muffler Kit
Regular Price: $1,130.00
Special Price $891.00
Muffler system for the 2016+ Mazda MX-5 Miata produced by Real Speed Engineering (RSE). The Real Speed Engineering Titanium Muffler Kit is a replacement muffler section of the exhaust designed for increased exhaust flow and lighter weight. The new muffler section features an increased piping diameter, from 54mm to 63.5mm. The full titanium muffler kit uses a cannonball style muffler with an exhaust tip size of 89mm. The RSE muffler is compatible with the factory mid pipe and reduces weight of the exhaust system, weighing in at only 5.8 kg. Real Speed Engineering makes installation easier by providing new mounting hardware, exhaust clamps, and a removable silencer to quiet the 103 db exhaust note when needed. USA Customers : Enjoy Free Shipping with Gift Card Code RSEUSA ! Learn More
-
Fujitsubo Authorize RM Exhaust & Diffuser
$1,977.99Exhaust system for the 2016+ ND Mazda MX-5 Miata designed by Fujitsubo. The Fujitsubo Authorize RM Exhaust is a rear muffler section with titanium tips and offered with a rear lip. The Fujitsubo A-RM transforms not only the sound of the ND Miata, but also the looks as a Kenstyle Rear Diffuser is included. The Fujitsubo A-RM exhaust features 70mm quad slash cut exhaust tip with blued finish that is accentuated by the new rear lip, though some modification to the factory rear bumper is necessary. The new exhaust from Fujitsubo is 1.6 kg lighter than factory and features 50mm piping. Learn More
-
Carbonic Active Hood Cover
$79.99Active hood delete cover produced by Carbonic Japan for the 2016+ ND Mazda MX-5 Miata. The Carbonic Active Hood Cover is a pair of covers designed to remove the troublesome active hood actuators on the ND Miata that tend to fail causing an expensive repair. Carbonic's solution is the Active Hood Covers, which are twill carbon fiber brackets that cover the hole left by removing the actuators. The design incorporates an attachment point for the harness and cable ties are supplied. Carbonic also provides replacement black finish bolts for a quick installation. This product requires removal of hood actuators (airbags). It CANNOT be used if those pieces are not removed. Recommended to be paired with Zeromotive Active Hood Canceller. Learn More
-
Zeromotive Active Hood Canceller
$44.99Active hood canceller module for the 2016+ ND Mazda MX-5 Miata. It'll stop the flashing light after removal of the troublesome active hood actuators on the ND Miata that tend to fail causing an expensive repair. Learn More
-
HKS Super Air Filter
$84.97HKS Super Air Filter made by HKS for the 2016+ 1.5L/2.0L MX-5 Miata. It's a replacement air filter that will improve flow and keep engine safe from dust. The design of this filter (polyested nonwoven) is better than standard woven fabric and has a long lifespan. Learn More
-
Aimgain Titanium Exhaust Tips
$349.97Titanium exhaust tips (70mm) made by Aimgain for the 2016+ ND MX-5 OEM tail pipes. Installs very easily using tightening clips. Learn More
-
Axis Parts 5 Piece Aluminum Cap Set
$227.99Engine bay dress up from Axis Parts for the ND Mazda MX-5 Miata (2016+). The Axis Parts 5 Piece Aluminum Cap Set is a complete upgrade for all the plastic caps found in the engine room of the ND Miata. The new caps from Axis Parts are made of aluminum and available in two anodized finishes, red or blue with white contrasting lettering. The caps are easily installed over the factory pieces or as a replacement. The cap set includes covers for the coolant, washer fluid, engine oil, brake fluid, and a replacement topper for the oil level gauge. A matching radiator cap cover is also available from Axis Parts. Installation hardware is included. Learn More
-
R-Magic Intake Suction Hose
Regular Price: $199.99
Special Price $174.99
Intake suction tube for the 2016+ Mazda MX-5 Miata ND produced by R Magic. This silicone hose, available in a vibrant pink, is designed to smooth out induction air, potentially reducing intake resistance and providing a slightly improved throttle response. While you might not feel a dramatic difference in power, it's the perfect upgrade to dress up your engine bay and enhance your personal satisfaction. Compatible with ND5RC (1.5L) models, this hose adds a clean, stylish touch to your Miata while offering subtle performance benefits. 2.0L version has been discontinued and no longer available. Learn More
-
Autoexe ND07 Exhaust
$1,549.99AutoExe is back with their new exhaust offering to suit the newer generation ND and ND RF Miata’s (2024+ ND3). Give your car both a noticeable change in exhaust tone, as well as a refreshing change to the rear profile of your car. Although the Muffler can be purchased on its own, being a Dual Exit design it will interfere with part of the factory Rear Bumper. AutoExe has produced their own Rear Diffuser to provide your car a one-stop solution to matching the new Dual Exit layout to the body lines of your car. Transform the rear end of your car, and give your car a welcoming change in exhaust tone that will bring a smile to your face when accelerating! Learn More
-
Axis Parts Aluminum Fuel Cap
$79.99Fuel Cap Cover made by Axis-Parts for the 2016+ ND MX-5 Miata. It’s a cool part that is only seen when fueling and can be a reminder to the pump employee to put the correct gas type in the car. Please note that some photos show "Regular" fuel, but we only offer the "Premium" fuel version. Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
