You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Cooling
-
Garage Vary Headlight Air Intake Lid
Regular Price: $229.99
Special Price $184.99
Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly. Learn More
-
REV9 OE-Style Radiator Cooling Panel
Regular Price: $144.99
Special Price $127.99
Product from JAPAN made from high quality and light CARBON FIBER. Keeps the cold air at the radiator instead of letting it escape over the top. Learn More
-
REV9 OE-Style Cowl Cooling Panel
Regular Price: $224.99
Special Price $197.99
Product from JAPAN made from high quality and light CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, usefull for the persons using randall type intake. Learn More
-
Beatrush Radiator Cooling Panel
$149.99Product from JAPAN made by Beatrush. Keeps the cold air at the radiator instead of letting it escape over the top. Learn More
-
Garage Vary Radiator Cooling Panel
$144.99Product from JAPAN made from high quality and light CARBON FIBER. Keeps the cold air at the radiator instead of letting it escape over the top. Learn More
-
Jet Stream Headlight Air Intake Lid
Regular Price: $224.99
Special Price $179.99
Product made by Jet Stream to help engine cooling. Learn More
-
Jet Stream Turn Signal Intakes
Regular Price: $299.99
Special Price $274.99
Winker duct (TSI) made by Jet Stream. High quality product. These Turn Signal Intakes made by Jet Stream are much more unique then other TSI's out there today. Very sleek and flows well. It'll provide additional airflow to the engine bay and help reduce overall temperature while giving you a much cooler styling to the exterior of the car. UPDATE: Always come with mesh grille. Easy to remove if you don't want to have it. Learn More
-
SARD Fuel Pressure Regulator
Regular Price: $249.99
Special Price $199.99
SARD fuel regulator offers appropriate fuel pressure for high-performance application. SARD fuel pressure regulator also allows an increase of factory injector discharge rate by configuring fuel pressure. Learn More
-
Mazdaspeed Radiator Cap
$74.99Product from JAPAN made by Mazdaspeed. One of the best radiator cap on the market. Learn More
-
Garage Vary Carbon Fiber Cowl Cover
$274.99Product from JAPAN made by Garage Vary from high quality and light CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Jet Stream Carbon Cowl Panel
$199.99Cowl Cover made by Jet Stream from high quality CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake. Learn More
-
Carbing Radiator Cap
Regular Price: $49.99
Special Price $44.99
High pressure radiator cap made by Carbing for all years MX-5 Miatas. It raises the boiling point of the cooling liquid to improve the cooling efficiency. Learn More
-
Koyo Red Radiator Cap
$49.99Radiator Cap made by Koyo in Japan for the NA, NB, NC & ND MX-5. It adds a nice red touch to the engine bay. Learn More
-
HKS Radiator Cap
$59.99Radiator Cap made by HKS specifically Mazda's Roadster. It’s a 1.1kgf/cm2 so it’s very safe to run on OEM radiator and hoses. Learn More
-
Odula Titanium Exhaust Wrap
$124.99-Useful for wrapping a manifold or cat-back system -Keep your exhaust gasses at a higher temperature -Great for racing Learn More
-
ARC Type-A Radiator Cap
Regular Price: $74.99
Special Price $59.99
Rare radiator Cap made by ARC in Japan for the NA, NB, NC & ND MX-5 (as well as other vehicle models). It adds a nice classy touch to the engine bay. This is a re-run which means we've asked ARC to re-make a discontinued product for REV9 Autosport. Once the 50 radiator caps are gone, there will be no more of them. Please check the back of your radiator cap before ordering. We are selling the Type-A (as pictured on the graphic). If yours is Type-B, we do not offer it. Learn More
-
HPI Engine Oil Cooler Kit
Regular Price: $599.99
Special Price $549.99
10 rows engine oil cooler that is designed specially for the NA (1989-1997) MX-5 Miata by HPI to cool the engine oil. It mounts in front of the radiator to get its fresh air. It's a complete kit that includes all necessary fittings for a relatively easy install. Learn More
-
Nielex Undercover End Lip
$94.99Created for all NA and NB Miata models, the Nielex Exterior End Lip protects and improves the rigidity of the rear end of the lower engine room. It also prevents air from being sucked into the engine room, lowers engine temperature and protects the engine room from wear and tear. Installation requires drilling and cutting of the plastic cover. Learn More
-
Cusco Radiator Cowl Panel
$149.99Radiator Cooling Panel made by Cusco for the 1989 to 2005 (NA & NB) Miata. It has their signature anodized blue color and will give a nice look to your engine bay while being functional. It helps bring air to the radiator instead of going over it. Learn More
-
JUN Auto High Pressure Radiator Cap
$59.99High pressure radiator cap made by JUN Auto to give a nice touch to your MX5/Miata’s engine bay, but also helps the cooling efficiency of the system because of the higher pressure rating versus OEM unit. We recommend pairing it with an upgraded radiator and new/upgraded radiator hoses to avoid failure. Learn More
-
Arrive ND Compressor AC Convert Kit
$1,049.99Air Conditioning Convert Kit made by Arrive for the NA (1989-1997) and NB (1998-2005) MX-5 Miata. This kit converts your old, heavy and inefficient air conditioning compressor to the brand new and lightweight compressor from the ND Miata. It was developed as a restoration project, but it’s now offered as a kit that can be installed at your local professional mechanic. This kit will only fit vehicles that ALREADY have A/C installed and are Right Hand Drive (RHD). ). In order to prevent the parts from melting after changing the gas, you need to exchange the old parts with the new ones (Expansion bulb, Liquid tank & O-Shaped Rings (for freon gas)). UNAVAILABLE AT MOMENT AS WE CANNOT PROVIDE WITH INSTALL SUPPORT Learn More
Out of stock
-
Carbing Radiator Cooling Panel
$179.99Radiator cooling plate by Carbing for NA (1989-1997) MX-5 Miata. This product sits on top of the radiator and front grill and condenses the cold air blowing into the car toward the radiator. This allows for more efficient cooling of the vehicle which means longer seat time even while pushing the car to its limits. An easy mod to up the Miatas cooling power without having to buy a new radiator. Learn More
-
Beatrush Oil Cooler Sandwich Plate
$144.99Adapter made to fit oil lines between the engine and oil filter for the purpose of installing an oil cooler on your Miata. It’s the missing part for your DIY install! Learn More
-
SARD 68 Degrees Thermostat
$104.9968 Degrees C (Low Temperature) Thermostat made by SARD Racing for NA8 (1994-1997) and NB8 (1998-2005) Mazda Miata/MX-5. The goal of this piece is to prevent power loss under high engine load. It has quick response to the variation in the cooling of the water temperature to provide more linear control over the cooling water flow rate. Learn More
-
TUCKIN99 Low Temp Thermostat
$99.99This part will start the water cooling flow earlier (71 degrees Celsius) in order to prevent engine overheat on the NA or NB MX-5 Miata (1989-2005). The lift amount is actually higher than normal to prevent foaming of cooling water, making it suitable for circuit driving. Learn More
-
Beatrush Aluminum Underpanel
$374.99Front Underpanel and Side Panel (Mounts) Set made by Beatrush for the 1989 to 1997 MX-5 Miata. Drive with more stability at higher speeds with the durable Beatrush aluminum underpanel. The 2mm thick underpanel significantly reduces air tubulence for a smoother ride. It also comes with built-in slits to help reduce engine temperatures and provides extra engine protection. The benefit of the side panels is that you can protect the car from stepping stones from the side. 2021 MODEL : Includes vertical panel for extra safety. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Garage Vary Intake Duct
$134.99Intake Duct made by Garage Vary for the 1989-2005 NA/NB MX-5 Miata. It’s made as DIY item that you can install on the US Passenger Side to bring fresh air to your air intake. Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
