You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Odula
-
Odula Fender Louvers
$499.99Front Fender Ducts made by Odula for the 2016+ ND MX-5 Miata. Since the inside of the front fender/wheel arch tends to have positive pressure, installing this piece will reduce resistance by releasing the pressure. It’ll lower the heat in the wheel arch and drop the temperature of the break pads, making them last longer. This piece has been tested in endurance racing (Super Taikyu) and proven to help performance of the car under heavy use. Learn More
-
Odula Flat Bottom Panels
$244.99A must have product for a discreet increase in aerodynamic, this four piece flat bottom panel kit from Odula will help the ND (2016+) Mazda Miata/MX-5 flow better at high speeds. Using light weight, high quality aluminum, this kit will flatten the underside of the car, reducing drag as well as adding downforce by using the air coming from the radiator. With only a half hour installation time per panel, its an easy mod that anyone can do to increase driving performance. DUE TO PRODUCT SIZE & HIGH SHIPPING FEES, WE STOPPED ACCEPTING ORDERS. Learn More
Out of stock
-
Odula Fresh Air Grille
$499.99Front Bumper Grille made by Odula for the 2016+ ND MX-5. It widens the opening of the front bumper allowing for more air. Odula claims that the water temperature drops by about 5 degrees after running this front grille. Learn More
-
Odula Front Diffusers Garnish
$399.99The Odula Front Diffusers (Lip) Garnish are meant to be installed over the factory ones from 2016+ ND MX-5 Miatas. They are available in FRP (unfinished) and Carbon Fiber. They have a slightly more aggressive shape than the OEM ones. Learn More
-
Odula Front Downforce Panel
$449.99The Odula front downforce panel is a must have for a more planted driving feel while still retaining the stock look of the ND (2016+) Mazda Miata/MX-5. Using the continuous wind flow to the radiator, the panel circulates the cool air farther back into the engine bay, optimizing engine cooling and stabilizing the car onto the ground. Made with high quality FRP and an easy one hour installation, this panel will be a simple long lasting mod to add. Learn More
-
Odula Front Lip
$599.99Front Lip made by Odula for the ND (2016+) MX-5 Miata. It has ducts that helps improve air to the brakes as well as improve downforce. It’s available in both FRP and Carbon Fiber. Learn More
-
Odula GT-Type Side Steps
$599.99The GT-Type Side Skirts made by Odula for the NC (2006-2015) are meant to improve aerodynamics at its maximum. It’s what they used on their NC GT Car who was very competitive in the Japanese racing classes which only allows aerodynamics. Learn More
-
Odula Hardtop
$3,599.99Hard Top made by Odula for the 2016+ ND MX-5. It reuses OEM mounting points and keeps inner clearance very similar to what the OEM Soft Top provided. This hardtop has been designed to be used for both street and racing/circuit and had been tested over and over in endurance racing. It has seals to provide OEM-like quality. It is a 1 piece construction made of high quality FRP or Carbon Fiber. Please note that the FRP version is meant to be painted and not installed as-is. Please note that the Carbon Fiber version is glossy (photos showing exterior in "matte" Carbon Fiber were of the prototype version. AS OF MARCH 20TH 2025 : PRODUCTION LEAD TIME IS ~2 MONTHS. IF YOU HAVE TIGHT SCHEDULE, CONTACT US BEFORE ORDERING. Capacity is 1-2 hardtops per month, so first come first served.Disclaimer : Please be advised that this item has correct pricing for shipping within the lower 48 states of the United States, Canada (BC, AB, SK, MB, ON, QC & NB) & Australia.
If an order is submitted with a shipping address outside of the above locations, we will need to confirm the shipping cost on a case-by-case basis. We recognize the inconvenience this may pose and appreciate your understanding, as the size of the box for this product is extremely big, it is impossible to provide live international shipping rates.
For customers residing outside the above locations who are interested in this product, we suggest that you send us an email including your full address so we can estimate the total cost to your destination.
Learn More
-
Odula High Flow Intake
$199.99Silicon intake made by Odula for 1.5L & 2.0L ND Roadster. It’s made to improve air going to the intake and increase engine response. Learn More
-
Odula License Plate Intake
$234.99License plate relocator made of FRP by Odula with function in mind. It has an integrated intake that brings air towards the air intake in the engine bay. Relocating the license plate also gives more airflow to the radiator! Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
