Higher voltage ignition spark coils made by JoyFast for the ND (2016+) MX-5 Miata. This product will increase the voltage of the ignition and provide more low/medium torque as well as improved acceleration. This piece has been tested on a NC car for years and has survived over 200,000KM (120,000 miles)! If your car has over 30,000KM-40,000KM it’s a recommend product to replace your OEM ones. Learn More

Manual high speed fan switch by JoyFast for NC (2006-2015) Mazda Miata/MX-5. NC Miatas have a ECU that sets the fan speeds to low, medium or high on its own depending on the water temp. In performance situations though, the NC Miatas can spike very quickly making it hard for the ECU to keep up and possibly not having enough time to switch to a high fan setting cause the engine to overheat. Having a manual switch allows for full control of the cars cooling and is a must for those pushing their cars to the limit. It is strongly advised to pair with a water temperature gauge to better judge timing for the fan. Learn More

License Plate Holder made by JoyFast for the 2016+ ND MX-5 Miata. It installs by drilling onto the front grille and allows adjustment of angle so it can help with radiator flow and make it less visible. Learn More

JoyFast released this new model of shift knob that is Roadster-specific to work with all generations Miata (NA, NB, NC & ND)! It offers great grip overall and it’s very easy to manulate. Learn More

Experience easier shifting and maneuverability with our range of JoyFast steel shift knobs. Made of stainless steel with a polished finish, each shift knob has an easy to grip design for added comfort when driving. Choose from three different weights and sizes - 64mm, 84mm and 90mm. Designed exclusively for Miata cars, installation is hassle-free. Learn More

Product made by Joy Fast. When has reaching for your seatbelt ever been easier? Joy Fast's seatbelt extension allows for you to reach your seatbelt easier and faster without always having to look back when reaching around. It is flexible and sturdy, allowing for easy maneuvering. It is originally being designed for the Japanese driver's side. As it is made from plastic, it can be bended the angle to the opposite direction by adding heat (above the stove, by using hot dryer etc). It cannot be installed onto a car with DHT. Learn More

Product made by JoyFast. Designed for those who still want to be able to use their FM radio without having a 3 feet tall antenna. Those using electric antenna may require slight modifications to fit (using OEM fixed antenna base). Learn More

Steering Control Relocation Kit made by Joy Fast for the ND (2016+) MX-5 Miata. This product is meant for those using an aftermarket steering wheel but want to keep the audio/cruise control! It’s a steel plate that is compatible with the Daikei Boss Hub Kit (small modification needed to the plastic cover to fit the wiring). Just bring in your favorite steering wheel and horn button and you’re all set! You need to re-use your OEM switches from your steering wheel, they are not provided with the kit. Learn More

OEM NA (1989-1997) and NB (1998-2005) MX-5 Miata steering wheels do not tilt up for adjustment. JoyFast came up with a simple solution (spacers) to tilt the steering wheel down for those needing such adjustment. It will bring the steering wheel 10mm lower. Installation instructions : Remove 2 bolts of the steering shaft and put the collar into the rectangular holes and down it. As a set contains 2x 5mm and 2x 10mm, you can choose either of them. You can also use both collars at the same time to make 15mm, but it might go too low. If the bolts becomes not long enough, please get the longer ones locally. Learn More