You have no items in your shopping cart.
REV9 Autosport
We ship worldwide! Contact us : info@rev9autosport.com
We're sorry, our system cannot estimate the shipping either due to the quantity of items in cart or the country it's being shipped to!
close
Jet Stream
-
Jet Stream Rear Spoiler Type-1
Regular Price: $474.99
Special Price $449.99
Product from JAPAN made from high quality FRP. Gives an aggressive look to the rear end of the car. Learn More
-
Jet Stream Hardtop Spoiler
$399.99Product made by Jet Stream. High quality FRP. Flows well with OEM hardtops. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Jet Stream Door Handle Covers
$119.99Product made by Jet Stream. Made from high quality FRP. Adds a really nice touch to your exterior. Please note that the Black Gel Coat is NOT the pictured Carbon Fiber. It's Glossy Black that is meant to be painted for a better look. Learn More
-
Jet Stream Rear Canards
$274.99Product made by Jet Stream. Jet Stream's rear valence flows well with the rear bumper. Looks great with flares, sideskirts, and canards. Learn More
-
Jet Stream Side Canards
$199.99Product made by Jet Stream. High quality product. Looks great with flares, sideskirts, and canards. Learn More
-
Jet Stream Rocker Panel Trim
$274.99Product made by Jet Stream. High quality product. Looks great with flares. Attaches with 3M double-sided tape and a few screws. Learn More
-
Jet Stream Rear Spoiler Type-2
$334.99Product from JAPAN made from high quality FRP. Gives an aggressive look to the rear end of the car. Learn More
-
Jet Stream Fender Flares
$514.99Product from JAPAN made from high quality FRP. Original product made by Jet Stream. It gives the capacity to run wider wheels with lower offset and larger tires on your roadster without compromising the look of it! Please note that these are OVER FENDERS. Learn More
-
Jet Stream Headlight Air Intake Lid
Regular Price: $224.99
Special Price $179.99
Product made by Jet Stream to help engine cooling. Learn More
-
Jet Stream Turn Signal Intakes
Regular Price: $299.99
Special Price $274.99
Winker duct (TSI) made by Jet Stream. High quality product. These Turn Signal Intakes made by Jet Stream are much more unique then other TSI's out there today. Very sleek and flows well. It'll provide additional airflow to the engine bay and help reduce overall temperature while giving you a much cooler styling to the exterior of the car. UPDATE: Always come with mesh grille. Easy to remove if you don't want to have it. Learn More
-
Jet Stream Gas & Trunk Release Cover
$114.99Product made by Jet Stream. Is your center armrest console useless to you? This Jet Stream product will be perfect for you. Learn More
-
Jet Stream Shorty Console Type-1
$224.99Product made by Jet Stream. Is your center armrest console useless to you? This Jet Stream product will be perfect for you. It's a very nice replacement piece. If no power-window hole is needed, please note that the surface cannot be 100% smooth and flat. We recommend re-sanding and re-painting to have a perfect surface. Learn More
-
Jet Stream Shorty Console Type-2
$249.99Product made by Jet Stream. Is your center armrest console useless to you? This Jet Stream product will be perfect for you. It's a very nice replacement piece. Learn More
-
Jet Stream Carbon Fiber Crash Pads & Door Pads
$549.99Product made by Jet Stream. Made from high quality carbon fiber. Fashionable product. Attaches with 3M double-sided tape. Learn More
-
Jet Stream Shorty Console Type-1
$214.99Product made by Jet Stream. Is your center armrest console useless to you? This Jet Stream product will be perfect for you. It's a very nice replacement piece. Learn More
-
Jet Stream Door Handle Covers
$89.99Product made by Jet Stream. Made from high quality FRP. Adds a really nice touch to your exterior. Learn More
-
Jet Stream Shorty Console Textured
$274.99Product made by Jet Stream. Is your center armrest console useless to you? This Jet Stream product will be perfect for you. It's a very nice replacement piece. Textured finish to match the console "leather" pattern. Learn More
-
Jet Stream Rear Bumper Upper Diffuser
$374.99Product from JAPAN made by Jet Stream. Adds a race-ready theme to the back of your car! Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Jet Stream Rear Bumper Lower Diffuser
Regular Price: $299.99
Special Price $274.99
Product from JAPAN made by Jet Stream. Adds a aerodynamics to the back of your car! Similar to having a rear trunk spoiler in term of performance. For installation, you remove the bolts (2x) of the brace bar and screw up it together with the rear diffuser again as for the front. You can do the same by using the tow hooks as for the rear. You don’t need to cut or drill basically. However, if your car has an aftermarket exhaust, you may need to cut it accordingly. Learn More
-
Jet Stream Rear Diffuser
Regular Price: $574.99
Special Price $499.99
Product from JAPAN made by Jet Stream. Adds a aerodynamics to the back of your car! Similar to having a rear trunk spoiler in term of performance. A mounting bracket is included and makes the rear diffuser bolt-on. Learn More
-
Jet Stream Rear Spoiler Type-2
$349.99Product from JAPAN made from high quality FRP. Gives an aggressive look to the rear end of the car. Learn More
-
Jet Stream Eye Lids
$199.99Product from JAPAN made by Jet Stream. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Learn More
-
Jet Stream License Plate Holder
$109.99Product made by Jet Stream. Get rid of your stock license plate holder for this beautiful FRP or Carbon Fiber piece. Learn More
-
Jet Stream Rear Spoiler Type-1
$349.99Product made by Jet Stream. Want a nice aggressive change to the rear of your car? The Jet Stream Type-1 rear spoiler is the way to go. Nice and sleek. Learn More
-
Jet Stream Rear Spoiler Type-2
$374.99Product made by Jet Stream. Want a nice subtle change to the rear of your car? The Jet Stream Type-2 rear spoiler is the way to go. Nice and sleek. Please note that the F1 spoiler is not included in the price, it is only the ducktail spoiler. Learn More
-
Jet Stream Clubman R01 Front Lip
$549.99Product made by Jet Stream. Very aggressive front lip that gives additional downforce to NC vehicles. Learn More
-
Jet Stream Clubman R Front Lip
$599.99Product made by Jet Stream. Very aggressive front lip that gives additional downforce to NB vehicles. Learn More
-
Jet Stream Clubman R01 Side Steps
Regular Price: $499.99
Special Price $484.99
Product made by Jet Stream. Very aggressive side steps that gives lower look to NC vehicles. Learn More
-
Jet Stream Clubman R Side Steps
$424.99Product made by Jet Stream. Very aggressive side steps that gives lower look to NB vehicles. Learn More
-
Jet Stream Clubman R Front Spats
$149.99Product made by Jet Stream. Jet Stream's front spats flows well with the front bumper. Looks great with flares & side skirts. Learn More
-
Jet Stream Clubman R Rear Spats
$129.99Product made by Jet Stream. Jet Stream's rear spats flows well with the rear bumper. Looks great with flares & side skirts. Learn More
-
Jet Stream PRHT Ducktail Spoiler
$339.99Product made by Jet Stream to improve the look of the rear end of the vehicle. It is made especially to fit NC with power retractable hardtop (RHT). It will hide the third brake light and requires removal of Mazda badge on the trunk. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Jet Stream Light Weight Aero Front Fenders
$1,049.99The lightweight aero fenders are made to help NB roadster as a functional upgrade. This part will improve downforce as well as brake cooling! It also helps increase performance as front end of the vehicle will become lighter, too. Learn More
-
Jet Stream Clubman R Rear Side Fins
$249.99Product made by Jet Stream. Aggressive rear side pieces that will help improve downforce. Made to have more stability at high speed when on circuit, but also works on highways. Learn More
-
Jet Stream Top Nose Duct
$209.99This product is made to bring more air to the engine bay of NC3 vehicles. You simply replace your OEM bumper piece for this item and you’re all set. It is best to use it with their Jet Stream Ram Super Intake for higher power input.
NC2 : Please note that this piece will require body work and fitting onto the OEM grille. This is not as plug-and-play as the NC3 version.
Learn More
-
Jet Stream Ram Super Intake
$349.99Product developed by Jet Stream to work in conjunction with the Jet Stream Top Nose Duct. It’ll provide extra power and torque at high speed because of the increased airflow directed to the air intake. Another nice benefit is that it'll drop engine bay temperature by 3-4 degrees. Removal of the bumper is required to install this part.
Learn More
-
Jet Stream Side Steps
Regular Price: $499.99
Special Price $449.99
Side steps made by Jet Stream for 1989-1997 MX-5. Makes the side of the vehicle look much lower and improve aerodynamics. Please note that they don't come with the orange pinstripe Learn More
-
Jet Stream Type-01 Side Steps
$599.99Side steps made by Jet Stream for latest generation NC2 and NC3 (2009-2013). Very aggressive side steps that gives lower look to NC MX-5. The Type-01 is the regular version and the Type-01R has the black fins on it (makes the vehicle lower). Learn More
-
Jet Stream Tail Lights Cover
$239.99Tail lights cover made by Jet Stream from high quality FRP. Sticks onto your stock tail lights with double sided tape. Makes the rear end of the vehicle look much sleeker. Learn More
-
Jet Stream N-Zero Front Lip
$674.99Front Lip made by Jet Stream for 2009-2012 NC MX-5s that is very aggressive looking. It was developed for Japan Roadster Cup and ran by Fuji race champion. The front lip has side canards and under-diffusers that help generate more downforce! Learn More
-
Jet Stream Underdiffuser
$1,049.99Rear diffuser that’s made by Jet Stream to fit onto NC chassis vehicles. It is made for a middle-exit exhaust, but can also fit with vehicles running OEM exhausts (both sides). It is very aggressive looking and will help increase downforce and reduce lap times. It requires drilling to the bumper for installation. Learn More
-
Jet Stream Front Lip & Diffuser
$499.99Front Lip made by Jet Stream that is used on their NC3 demo car (track tested) to improve looks & aerodynamics. It comes with an integrated underflap (diffuser) and has optional side flaps for even better aerodynamics. Learn More
-
Jet Stream Side Air Dams
$174.99Product by Jet Stream to help bring more air to the engine bay at high speed. The purpose of these items is to bring air to the airbox. The duct (75mm) is not included with the set (it’s a do it yourself). Learn More
-
Jet Stream GT200 Widebody Kit
$2,499.99The Jet Stream GT200 Kit was made for racing purpose. It improves the aerodynamics of the NB chassis and also improves the look. It’s used on a lot of competition-winning race cars in Japan and now available to the public. The width increases 10 mm per side (20mm in total). Jet Stream designed it not to become much wider than OEM so that the car passes the Japanese inspection without problem. Made to fit 14x7 & 15x8 wheels with racing tires. The Rear Bumper Lower Diffuser and Rear Bumper Upper Diffuser are sold separately.THIS ITEM IS NOT AVAILABLE FOR DOOR-TO-DOOR SHIPPING DUE TO SIZE LIMITATION. WE CAN ONLY SHIP TO NEARBY INTERNATIONAL PORT OR AIRPORT. PLEASE SEND US AN EMAIL TO CONFIRM PRICING.
Learn More
Out of stock
-
Jet Stream Carbon Cowl Panel
$199.99Cowl Cover made by Jet Stream from high quality CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake. Learn More
-
Jet Stream Super Intake Chamber
$449.99Product developed by Jet Stream that's installed next to the throttle body. Proven during circuit racing, it improves power and throttle response. It's used by a lot of NC race cars and very popular product in Japan. Please note that removal of OEM Sound Enhancer is necessary to install this part. Learn More
-
Jet Stream Clubman R NB1 Front Lip
$549.99Front Lip made by Jet Stream for pre-facelift NB chassis. Very aggressive front lip that gives additional downforce to NB1 vehicles. Learn More
-
Jet Stream Front Lip
$549.99Front lip made by Jet Stream from 3 pieces to lower shipping cost. It's also very nice looking and the price is higher than other regular NA front lips because it is very difficult to make, but it's also a very beautiful product. Learn More
-
Jet Stream Front Lip
$499.99Front lip made by Jet Stream for NB8C-1 (1998-2000) from 3 pieces to lower shipping cost. It's a beautiful product that's very hard to produce due to the complexity of the item. Only for the originals! Learn More
-
Jet Stream Original Headlights
$974.99Headlights conversion kit made by Jet Stream as an original design to replace the NA flip-up lights. It totally changes the look of the first generation Roadster. It also saves some weight by removing the OEM headlights for these. It has low and high beams, like OEM lights. Learn More
-
Jet Stream Clubman R Front Lip
$549.99Front Lip (Air Dam) made by Jet Stream for the NA (1989-1997) MX-5 Miata. It is inspired by their NB and NC version of the Clubman R which is aimed at improving vehicle's overall downforce and aerodynamics. This is the latest design by Jet Stream to make the NA look much more aggressive. Learn More
-
Jet Stream Gran Turismo Over Fenders
Regular Price: $1,599.99
Special Price $1,399.99
The Jet Stream Gran Turismo Overfenders are made specially for the NC3 (2013 to 2015) MX-5. It will make the car 15mm wider per side and allows running lower offset wheels on the car. The shown vehicle is running 17x9.5 +35 in front and 17x9.5 +28 in the back combined with 245-40R17 tires and sees a lot of track duty. It's mainly used to be legal (so tires and wheels don't stick out from the arches) and make the car look much more aggressive. Drilling is required inside the flares. The holes cannot been seen from the outside. Learn More
-
Jet Stream Clubman GT Front Section
$999.99Front Lip & Air Deflector combo made by Jet Stream for the facelifted NB chassis (2001-2005). Very aggressive aerodynamic add-on that gives additional downforce to NB2 vehicles. It is basically a slightly less aggressive mix of their Clubman R Front Lip and the front deflector of their GT200 Wide Body Kit!
Please note that the silver NB has molded piece of front deflector. It usually comes in 2 pieces (as shown on red NB). Learn More
-
Jet Stream 01 Front Lip
$349.99Front lip spoiler made by Jet Stream for the NC3 MX-5 (2013-2015). It flows well with the lines of the car and it's a nice and inexpensive option to add some style to the front end of the car (and make it look lower as well). If you want a more aggressive version, check out the Jet Stream Front Lip & Diffuser!
Please note that the pictured lip is wrapped in Carbon Fiber sheet, the one we ship is made of FRP. Learn More
-
Jet Stream Pegasus Front Lip
$799.99This is the first front lip designed by Jet Stream to give the NA Miata (1989-1997) a wide and low look. It’s based on the design of race cars from the 1970’s era. It’s made to give better aerodynamics to the NA front bumper, but also keep the same clearance as the B-Spec (R-Package) Front Lip. Learn More
-
Jet Stream Clubman GT Side Steps
$1,049.99Side skirt made by Jet Stream that is 2 pieces (side step & rear side diffuser) that provides a nice look and better aerodynamics to the NB (1998-2005) MX-5 Miata. It follows the lines of the vehicle very nicely and will sure turn heads. Please note that the vehicles on the pictures are equipped with Jet Stream Aero Front Fenders, but it will also work with OEM fenders.
Learn More
-
Jet Stream Rear Spoiler Type-1
$414.99The Type-1 Rear Spoiler from Jet Stream is a raw looking and very aggressive ducktail spoiler made for the NB (1998-2005) MX-5 Miata. It is easy to install and will give a very nice look to your car. Learn More
-
Jet Stream Clubman Over Fenders
$474.99Fender flares (overfenders) made by Jet Stream for the NB1 (1998-2000) MX-5 Miata. Those will make the vehicle 20mm wider per side and do not require cutting into the fenders for installation (although it can be done). Due to the location of the holes, it's a part that can be removed without much consequences. Learn More
-
Jet Stream Fog Light Blanks
$169.99 As low as: $119.99Fog Lamps Covers made by Jet Stream for the NB2 (2001-2005) MX-5 Miata. The fog lamps cover will give the bumper a much sleeker look and improve aerodynamics. They are available in both FRP (Unpainted) and Carbon Fiber. Please note that the picture of the Black NB (with rivets) has modified the cover to put rivets on it. It does not come that way from Jet Stream. Learn More
-
Jet Stream Front Lip Type-2
$499.99This is a slightly less aggressive version of the Type-1 Front Lip made by Jet Stream for the NB1 (1998-2000) Miata. It’s made of 3 pieces for easy shipping and potential replacement if a damage happen during racing/daily driving.
Learn More
-
Jet Stream License Plate Holder
$124.99Number plate holder made by Jet Stream for the NB1 (1998-2005) and NB2 (2001-2005) MX-5 Miata. It’s a nice product that’s available in both FRP and Carbon Fiber. When the plate is not installed (for shows/racing), it still gives the car a neat look up front. Learn More
-
Jet Stream Intake Funnel
$449.99This is an intake funnel made by Jet Stream that uses a RAM style funnel to provide cold air directly into the OEM airbox. It’s designed for both NB1 (1998-2000) and NB2 (2001-2005). It’s perfect for those who are in a class that requires keeping the OEM airbox. Learn More
-
Jet Stream Windshield Banner
$99.99Windshield Banner by Jet Stream for NA (1989-1997) and NB (1998-2005) Mazda Miata/MX-5. A great looking banner to add a race car look to the Miata. Pre-cut for a easy install on to the windshield with the added benefit of blocking the sun for those that drive a lot in sunny areas. Perfect way to show support for Jet Stream, a company dedicated to Miatas. Comes in two great colors, orange and black. Learn More
-
Jet Stream Clubman R03 Front Lip
$674.99Front Lip made by Jet Stream for 2013-2015 NC MX-5s that is very aggressive looking. It is the equivalent of the NC2 version that was developed for Japan Roadster Cup and ran by Fuji race champion. Learn More
-
Jet Stream Clubman R Side Steps
$499.99Side Steps made by Jet Stream for the NC2 (2009-2012) and NC3 (2013-2015) MX-5 Miata. Very aggressive side steps that gives lower & sleeker look to NC vehicles. Learn More
-
Jet Stream Window Vent
$174.99Looking to get fresh air in your Miata? This cool and easy to install/remove piece made by Jet Stream will install in the driver and passenger triangle window of your NA (1989-1997), NB (1998-2005) or NC (2006-2015) MX-5 Miata. Its design allows to stay permanently and has a moving mechanism that allows changing its position when not in use. It can also be installed temporarily using suction cups mounts. Learn More
-
Jet Stream Front Lip Type-2
$549.99Front lip made by Jet Stream from 3 pieces to give an unique look to the front of the NA (1989-1997) Miata. It's also very nice looking and the price is higher than other regular NA front lips because it is very difficult to make, but it's also a very beautiful product. Learn More
-
Jet Stream Suzuka Special Rear Diffuser
$1,049.99This rear diffuser was created by Jet Stream especially for the NA (1989-1997) MX-5 Miata racers with best possible aerodynamics features in mind. It’s made to provide with high level of downforce while being a 1-piece construction and as wide as possible. Learn More
-
Jet Stream NA22C Rear Spoiler
$454.99Rear Spoiler made by Jet Stream as part of their NA22C Program (for 1989-1997 MX-5 Miatas). It’s made of 3 pieces and can be ordered with or without the side pieces. It’ll look good on widebody vehicles as well as narrow body ones! Learn More
-
Jet Stream Air Intake Funnel
$174.99Jet Stream Air Cleaner Box Funnel is made for the 2006 to 2015 2.0L NC MX-5 Miata. It's designed to help with the torque at low, mid and high level RPM. The installation is very simple using double-sided tape. Learn More
-
Jet Stream Reflector Attachments
$149.99Side Reflector Attachment made by Jet Stream for the NC (2006-2015) MX-5 Miata. The piece is made so that you can use a NA or NB reflectors on the NC Rear Bumper. It comes with template for easy installation. Please note that it does NOT include the NA or NB reflectors. Learn More
-
Jet Stream Gurney Hood Flap
$304.97Hood Gurney Flap created by Jet Stream for the NA and NB MX-5 Miata (1989-2005). The Hood Gurney Flap is a precision-crafted part engineered by Jet Stream to deflect air away from the front windscreen contributing to a subtle increase in front down force while also enhancing heat extraction in vented hoods. Crafted from lightweight and durable carbon fiber, the Hood Gurney Flap seamlessly integrates with the upper edge of your Miata's hood. The precision engineering ensures a sleek and race-inspired aesthetic while delivering tangible benefits to your driving experience. Please note that installation involves relocating the windshield washer nozzles to accommodate the gurney flap. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
-
Jet Stream Front Lip
$549.97Front lip spoiler for the 2016+ Mazda MX-5 Miata ND from Jet Stream. The ND Front Lip is designed to contour to the factory front bumper shape creating a smooth, stylish front end that both looks lower and blends with the factory bodylines. Jet Stream offers the front lip in FRP construction, which comes unpainted and ready for paint to customize your ND Miata’s exterior. The front lip installs onto the underside of the front bumper with screws and double sided tape, thus making this more than a cosmetic upgrade with down force benefits being felt. Learn More
-
Jet Stream Gurney Hood Flap
$304.97Bonnet Gurney Flap made by Jet Stream for the ND (2016+) MX-5 Miata. The Hood Gurney Flap is a precision-crafted part engineered by Jet Stream to deflect air away from the front windscreen contributing to a subtle increase in front down force while also enhancing heat extraction in vented hoods. Crafted from lightweight and durable carbon fiber, the Hood Gurney Flap seamlessly integrates with the upper edge of your Miata's hood. The precision engineering ensures a sleek and race-inspired aesthetic while delivering tangible benefits to your driving experience. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more. Learn More
Established in 2007, REV9 Autosport has sold highest quality parts to thousands of roadster fanatics over the time. Known as the reference for rare JDM parts, we also offer quality items from USA, UK & Italy.
MY ACCOUNT
CUSTOMER SERVICE
© REV9 Autosport 2007 - 2025
